December 2013 - Test - lists.nanog.org

Re: AT&T UVERSE Native IPv6, a HOWTO
by Scott Weeks 02 Dec '13

02 Dec '13

--- owen(a)delong.com wrote: From: Owen DeLong <owen(a)delong.com> I actually tend to doubt it. All of the people I've talked to from the major operators have said that the charges in IPv4 were not a revenue source, they were an effort to discourage the consumption of the addresses and/or the use of static addresses and to try and recover the costs of dealing with them in cases where customers were willing to pay. ------------------------------------------ Not jumping into the turd chunkin' contest, but this is not my experience. The suits definitely want the money for income stream; small as it may be. I'd like to hear from others if their experiences are different. scott

2 1

RSVP Cisco ASR-9k to ALU 7750
by Rampley Jr, Jim F 02 Dec '13

02 Dec '13

Wondering if anybody on the list has any working configurations for RSVP tunnels between a Cisco ASR9k to Alcatel-Lucent 7750? I've been able to get LSP's up and talking between the two boxes, but I'm having an issue getting the RSVP tunnels to come up on the Cisco side. Jim

2 1

RE: AT&T UVERSE Native IPv6, a HOWTO
by Leo Vegoda 02 Dec '13

02 Dec '13

Hi, Darren Pilgrim wrote: > On 11/28/2013 1:07 PM, Leo Vegoda wrote: > > Is a /60 what is considered generous these days? > > Comcast only gives you a /64. That could be awkward for anyone who wants to run a separate LAN for wired and wireless. I hope it's only temporary. Cheers, Leo

2 1

Hardware resale question...
by Matt Kelly 02 Dec '13

02 Dec '13

I recently had a project end and have some pretty powerful hardware left over. Without spamming the list, I'm trying to get feedback as to where might be a good place to list this hardware and or resellers to contact who may be interested. The hardware is Juniper MX960 routers purchased new and used for about 45 days. Any input would be appreciated. Thanks. -- Matt

2 1

Is there a method or tool(s) to prove network outages?
by Notify Me 02 Dec '13

02 Dec '13

Hi Everyone Please I have a very problematic radio link which goes out and back on again every few hours. The only way I know this is happening is from my gateway device: a Sophos UTM that sends email anytime there's been an outage. The ISP refuses to accept this as outage/instability proof, and I'm wondering if there's something I can run behind the gateway UTM that can provide output information over time. They seem to be a primarily Windows+Cisco shop (as is common here in the 4th world). We are primarily Linux. Is there some set of command incantations I can run who's output I can collect and send to them (besides some sort of sustained ping)? Thanks in advance! Sina

11 22