- Test - lists.nanog.org

RE: Cisco HFR
by Burton, Chris 25 May '04

25 May '04

According to what the site says and from what I have heard they are talking about a $450,000-$500,000 base price for the single shelf unit and the OC768 Cards will probably be quite expensive until one of the other companies (Juniper or Avici) comes out with something competitive. Chris Burton Network Engineer Walt Disney Internet Group: Network Services The information contained in this e-mail message is confidential, intended only for the use of the individual or entity named above. If the reader of this e-mail is not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any review, dissemination, distribution or copying of this communication is strictly prohibited. If you have received this e-mail in error, please contact Walt Disney Internet Group at 206-664-4000. -----Original Message----- From: owner-nanog(a)merit.edu [mailto:owner-nanog@merit.edu] On Behalf Of Michel Py Sent: Tuesday, May 25, 2004 9:23 AM To: Eric Kuhnke; nanog(a)merit.edu Subject: RE: Cisco HFR > Eric Kuhnke > Here it is, complete with OC-768 interface: > http://www.cisco.com/en/US/products/ps5763/index.html It's a BFR allright. I wonder how much OC-768 linecards will go for; if it's consistent with 2OC192/POS-IR-SC some will be over a million list a pop. And you thought 12816 gear was pricey? Michel.

3 2

NANOG 31: Found
by Carol Wadsworth 25 May '04

25 May '04

Found: RB-1 Authentication Token S/N 499000458 Claim at NANOG registration desk.

1 0

RE: FW: IP Management
by Kevin Welch 25 May '04

25 May '04

Leave the website to make a liar out of me after I post to NANOG... I should have checked one last time before sending the message. -- Kevin -----Original Message----- From: John Forrister [mailto:john@segfault.com] Sent: Tuesday, May 25, 2004 2:46 PM To: Kevin Welch Cc: John Forrister Subject: Re: FW: IP Management The site seems fine to me. Direct download url would be: http://www.freeipdb.org/download/FreeIPdb_latest.tar.gz Just tried it from my personal account... you might give that a try. (disclaimer, I work for GX, but I'm not involved w/ this software at all...) -John On Tue, May 25, 2004 at 02:49:06PM -0400, Kevin Welch wrote: > > I am looking for an IP management solution and the cheaper the better. I > noticed this subject has come up before with no real clear choice of > softwares, I am trying to download and evaluate FreeIPDB, but the website > seems defunct and I am unable to find a mirror (google shows no other > download sites). Anyone have a copy of this software somewhere? > > BTW, The website is FreeIPDB.org > > -- Kevin

1 0

NANOG Lost/Found
by Carol Wadsworth 25 May '04

25 May '04

Found: one RSA SecurID at NANOG Registration Desk

1 0

RE: Cisco HFR
by Tomas Daniska 25 May '04

25 May '04

nice though for most people official IOU (IOS on Unix) announcement would be of more use... (imho) -- deejay > -----Original Message----- > From: owner-nanog(a)merit.edu [mailto:owner-nanog@merit.edu] On > Behalf Of Eric Kuhnke > Sent: 25. mája 2004 10:28 > To: nanog(a)merit.edu > Subject: Cisco HFR > > > Here it is, complete with OC-768 interface: > > http://www.cisco.com/en/US/products/ps5763/index.html >

1 0

Catalyst6509 GE interface hang without any indication
by Joe Shen 25 May '04

25 May '04

Hi, We are using a Catalyst6509 as distribution layer switch which is connected to M160 by GE interface( OSPF run on both side).. Yesterday we noticed that no traffic occur on that GE link at some special time. When trying to "ping" the other side on either platform, no responds got. But, on either M160 or Catalyst6509 "sh interface" showed no errors information. When checking syslog, there is no error record either. We also checked the configuration record for both system, and found there is no modification in configuration at the time when link load becomes zero. As last resort, we solved this problem by "shutdown" GE VLAN interface on Catalyst6509, and "no shut" consequently, then everything come up. But, today another Catalyst6509 of our system hanged on its uplink GE. We have to restarted the box to solve. Different from the catalyst6509 hanged yesterday, this catalyst6509 have netflow-export enabled for month. ( I included the detailed info at the end ) I tried hard to find out the reason but can't find any information related on Cisco's site. Is there anybody could do me a favor to do some help? Each word will be highly appreciated. regards Joe Shen ///////////////////////////////////////////////// info for the first Catalyst //////////////////////////////////// 6509C-SUP-hz> sh ver WARNING: This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. WS-C6509-NEB Software, Version NmpSW: 7.6(1) Copyright (c) 1995-2003 by Cisco Systems NMP S/W compiled on Apr 16 2003, 18:33:31 System Bootstrap Version: 7.1(1) System Boot Image File is 'bootflash:cat6000-sup2k9.7-6-1.bin' System Configuration register is 0x102 Hardware Version: 3.0 Model: WS-C6509-NEB Serial #: TBM07201366 PS1 Module: WS-CDC-1300W Serial #: SON07221E2W PS2 Module: WS-CDC-1300W Serial #: SON07221E25 Mod Port Model Serial # Versions --- ---- ------------------- ----------- -------------------------------------- 1 2 WS-X6K-SUP2-2GE SAL0725F92G Hw : 4.2 Fw : 7.1(1) Fw1: 6.1(3) Sw : 7.6(1) Sw1: 7.6(1) WS-X6K-SUP2-2GE SAL0725F92G Hw : 4.2 Sw : 2 2 WS-X6K-SUP2-2GE SAL0725F90A Hw : 4.2 Fw : 7.1(1) Fw1: 6.1(3) Sw : 7.6(1) Sw1: 7.6(1) WS-X6K-SUP2-2GE SAL0725F90A Hw : 4.2 Sw : 4 48 WS-X6148-RJ-45 SAL0723ELCS Hw : 1.3 Fw : 5.4(2) Sw : 7.6(1) 5 48 WS-X6148-RJ-45 SAL0723ELEG Hw : 1.3 Fw : 5.4(2) Sw : 7.6(1) 15 1 WS-F6K-MSFC2 SAL0723ENQ9 Hw : 2.5 Fw : 12.1(13)E7 Sw : 12.1(13)E7 16 1 WS-F6K-MSFC2 SAL0723ENPQ Hw : 2.5 Fw : 12.1(13)E7 Sw : 12.1(13)E7 DRAM FLASH NVRAM Module Total Used Free Total Used Free Total Used Free ------ ------- ------- ------- ------- ------- ------- ----- ----- ----- 2 131072K 67144K 63928K 32768K 9043K 23725K 512K 296K 216K Uptime is 260 days, 0 hour, 23 minutes 6509C-SUP-hz> 6509C-msfc-hz>sh hard Cisco Internetwork Operating System Software IOS (tm) MSFC2 Software (C6MSFC2-PO3SV-M), Version 12.1(13)E7, EARLY DEPLOYMENT RELEASE SOFTWARE (fc2) TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2003 by cisco Systems, Inc. Compiled Fri 20-Jun-03 09:24 by hqluong Image text-base: 0x40008C00, data- base: 0x419D8000 ROM: System Bootstrap, Version 12.1(11r)E1, RELEASE SOFTWARE (fc1) BOOTLDR: MSFC2 Software (C6MSFC2-BOOT-M), Version 12.1(8a)EX, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) idc6509C-msfc-hz uptime is 37 weeks, 1 day, 31 minutes System returned to ROM by power-on System restarted at 15:26:41 RPC Mon Sep 8 2003 Running default software cisco Cat6k-MSFC2 (R7000) processor with 114688K/16384K bytes of memory. Processor board ID SAL0723ENPQ R7000 CPU at 300Mhz, Implementation 39, Rev 3.3, 256KB L2, 1024KB L3 Cache Last reset from power-on X.25 software, Version 3.0.0. Bridging software. 16 Virtual Ethernet/IEEE 802.3 interface(s) 509K bytes of non-volatile configuration memory. 32768K bytes of Flash internal SIMM (Sector size 512K). Configuration register is 0x2102 6509C-msfc-hz> //////////////////////////////////////////////////////////////////////// ---- Msg sent via Spymac Mail - http://www.spymac.com

1 0

BGP - Newbie Documentation
by Jason Frisvold 24 May '04

24 May '04

All, Does anyone have some really good in-depth reading material on BGP for beginners? I've been handed the reigns of BGP administration for our network, but I would still consider myself very much a newbie to this... Some decent how-to's and accepted standards would be great... Thanks! -- Jason H. Frisvold PenTeleData

4 4

RE: BGP - Newbie Documentation
by Burton, Chris 24 May '04

24 May '04

Also Internet Routing Architectures (2nd Edition) has always been a favorite of mine. Chris Burton Network Engineer Walt Disney Internet Group: Network Services The information contained in this e-mail message is confidential, intended only for the use of the individual or entity named above. If the reader of this e-mail is not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any review, dissemination, distribution or copying of this communication is strictly prohibited. If you have received this e-mail in error, please contact Walt Disney Internet Group at 206-664-4000. -----Original Message----- From: owner-nanog(a)merit.edu [mailto:owner-nanog@merit.edu] On Behalf Of Gabriel Sent: Monday, May 24, 2004 12:03 PM To: nanog(a)merit.edu Subject: Re: BGP - Newbie Documentation I highly recommend Iljitsch's book: BGP Written by Iljitsch van Beijnum Published by O'Reilly and Associates ISBN 0-596-00254-8 It has helped me a lot. Gabriel Jason Frisvold wrote: > All, > > Does anyone have some really good in-depth reading material on BGP > for beginners? I've been handed the reigns of BGP administration for > our network, but I would still consider myself very much a newbie to > this... Some decent how-to's and accepted standards would be great... > > Thanks! > -- Gabriel Cain www.dialupusa.net Senior Systems Administrator gabriel(a)dialupusa.net PGP fingerprint: C0B4 C6BF 13F5 69D1 3E6B CD7C D4C8 2EA4 2B08 1C6D Technology for the sake of business.

1 0

RE: BGP - Newbie Documentation
by Burton, Chris 24 May '04

24 May '04

http://www.cisco.com/cgi-bin/Support/browse/psp_view.pl?p=Technologies:B GP http://www.nanog.org/isp.html#routing Chris Burton Network Engineer Walt Disney Internet Group: Network Services The information contained in this e-mail message is confidential, intended only for the use of the individual or entity named above. If the reader of this e-mail is not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any review, dissemination, distribution or copying of this communication is strictly prohibited. If you have received this e-mail in error, please contact Walt Disney Internet Group at 206-664-4000. -----Original Message----- From: owner-nanog(a)merit.edu [mailto:owner-nanog@merit.edu] On Behalf Of Jason Frisvold Sent: Monday, May 24, 2004 11:54 AM To: nanog(a)merit.edu Subject: BGP - Newbie Documentation All, Does anyone have some really good in-depth reading material on BGP for beginners? I've been handed the reigns of BGP administration for our network, but I would still consider myself very much a newbie to this... Some decent how-to's and accepted standards would be great... Thanks! -- Jason H. Frisvold PenTeleData

1 0

RE: BGP - Newbie Documentation
by Dan Ellis 24 May '04

24 May '04

Jason, Check these sites: http://www.cisco.com/en/US/tech/tk365/tk80/technologies_tech_note09186a0 0800c95bb.shtml The BGP section of the past Nanog talks: http://www.nanog.org/subjects.html And from our weekly celebrity's site, http://www.freedman.net/ - BGP 101 and BGP102 under the tutorial section. A Cisco Press book by Sam Halabi: "internet routing architectures", ISBN: 1-56205-652-2. -- Daniel Ellis, CTO, PenTeleData (610)826-9293 > -----Original Message----- > From: Jason Frisvold > Sent: Monday, May 24, 2004 2:54 PM > To: nanog(a)merit.edu > Subject: BGP - Newbie Documentation > > All, > > Does anyone have some really good in-depth reading material on BGP > for > beginners? I've been handed the reigns of BGP administration for our > network, but I would still consider myself very much a newbie to > this... Some decent how-to's and accepted standards would be great... > > Thanks! > > -- > Jason H. Frisvold > PenTeleData

1 0