November 2012 - Test - lists.nanog.org

Big day for IPv6 - 1% native penetration
by Tomas Podermanski 05 Jan '16

05 Jan '16

Hi, It seems that today is a "big day" for IPv6. It is the very first time when native IPv6 on google statistics (http://www.google.com/intl/en/ipv6/statistics.html) reached 1%. Some might say it is tremendous success after 16 years of deploying IPv6 :-) T.

87 261

How are you doing DHCPv6 ?
by Randy Carpenter 02 Apr '15

02 Apr '15

I am wondering how people out there are using DHCPv6 to handle assigning prefixes to end users. We have a requirement for it to be a redundant server that is centrally located. DHCPv6 will be relayed from each customer access segment. We have been looking at using ISC dhcpd, as that is what we use for v4. However, it currently does not support any redundancy. It also does not do very much useful logging for DHCPv6 requests. Certainly not enough to keep track of users and devices. So, my questions are: How are you doing DHCPv6 with Prefix Delegation? What software are you using? When DHCPv6 with Prefix Delegation seems to be about the only way to deploy IPv6 to end users in a generic device-agnostic fashion, I am wondering why it is so difficult to find a working solution. thanks, -Randy -- | Randy Carpenter | Vice President - IT Services | Red Hat Certified Engineer | First Network Group, Inc. | (800)578-6381, Opt. 1 ----

13 37

Generating IPv6 list with filtergen.level3.net
by Smith, Courtney 28 Mar '15

28 Mar '15

Anyone out there know how to generate a IPv6 list Level3's filtergen? I tried Google but didn't find anything. () ascii ribbon campaign - against html e-mail /\ www.asciiribbon.org - against proprietary attachments

4 4

Blocking private AS
by Thomas Magill 27 Nov '13

27 Nov '13

I am thinking about implementing a filter to block all traffic with private AS numbers in the path. I see quite a few in my table though so I am concerned I might block some legitimate traffic. In some cases, these are just prefixes with the private appended to the end but a few have the private as a transit. Is this a good idea or would I likely be blocking too much legitimate traffic? The filter I am using currently shows the following: BGP table version is 5462394, local router ID is 209.112.253.4 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path * i58.68.109.0/24 x.x.x.x 0 100 0 6130 9498 10201 65534 i *> y.y.y.y 0 6130 9498 10201 65534 i * i68.115.224.0/24 x.x.x.x 0 100 0 6130 19151 20115 65011 i *> y.y.y.y 0 6130 19151 20115 65011 i * 85.112.22.0/24 y.y.y.y 0 6130 6939 23148 64532 64532 64532 64532 64532 64532 64532 64532 64532 i *> 93.189.194.0/24 y.y.y.y 0 6130 3549 39386 39386 39386 25233 65000 47146 i * i x.x.x.x 0 100 0 6130 3549 39386 39386 39386 25233 65000 47146 i *> 96.60.243.0/24 y.y.y.y 0 6130 2828 4181 65528 i * i x.x.x.x 0 100 0 6130 2828 4181 65528 i * i96.61.232.0/24 x.x.x.x 0 100 0 6130 2828 4181 65527 i *> y.y.y.y 0 6130 2828 4181 65527 i * i96.61.233.0/24 x.x.x.x 0 100 0 6130 2828 4181 65527 i *> y.y.y.y 0 6130 2828 4181 65527 i * i96.61.234.0/24 x.x.x.x 0 100 0 6130 2828 4181 65527 i *> y.y.y.y 0 6130 2828 4181 65527 i *> 148.207.2.0/24 y.y.y.y 0 6130 2828 3257 16531 13579 65090 i * i x.x.x.x 0 100 0 6130 2828 3257 16531 13579 65090 i *> 148.207.40.0/24 y.y.y.y 0 6130 2828 3257 16531 13579 65090 i * i x.x.x.x 0 100 0 6130 2828 3257 16531 13579 65090 i *> 148.207.97.0/24 y.y.y.y 0 6130 2828 3257 16531 13579 65090 i * i x.x.x.x 0 100 0 6130 2828 3257 16531 13579 65090 i * 170.34.100.0/24 y.y.y.y 0 6130 19151 20115 65011 ? * 170.34.104.0/24 y.y.y.y 0 6130 19151 20115 65011 ? * 170.34.113.0/24 y.y.y.y 0 6130 19151 20115 65011 ? * i174.35.1.0/24 x.x.x.x 0 100 0 6130 16467 64565 i * i174.47.199.0/24 x.x.x.x 0 100 0 6130 2828 4323 15065 65123 i *> y.y.y.y 0 6130 2828 4323 15065 65123 i * i192.109.61.0 x.x.x.x 0 100 0 6130 19151 20115 65011 i *> y.y.y.y 0 6130 19151 20115 65011 i *> 196.216.249.0 y.y.y.y 0 6130 2828 3257 8513 8513 8513 36881 65000 36896 37062 i * i x.x.x.x 0 100 0 6130 2828 3257 8513 8513 8513 36881 65000 36896 37062 i Network Next Hop Metric LocPrf Weight Path *> 209.172.69.128/30 y.y.y.y 0 6130 16467 64565 i * i x.x.x.x 0 100 0 6130 16467 64565 i *> 213.146.161.0 y.y.y.y 0 6130 2828 174 64679 48493 i * i x.x.x.x 0 100 0 6130 2828 174 64679 48493 i Thomas Magill Network Engineer Office: (858) 909-3777 Cell: (858) 869-9685 mailto:tmagill@providecommerce.com <mailto:tmagill@providecommerce.com> provide-commerce 4840 Eastgate Mall San Diego, CA 92121 ProFlowers <http://www.proflowers.com/> | redENVELOPE <http://www.redenvelope.com/> | Cherry Moon Farms <http://www.cherrymoonfarms.com/> | Shari's Berries <http://www.berries.com/>

3 2

Network topology
by Colin Alston 15 Nov '13

15 Nov '13

Hi all I'm considering trying to come up with some means to automatically detect a networks topology and draw pretty pictures. This is somewhat boring though if a network isn't well arranged with VLANs and q-tag trunk routers and so on (It will just look like a big cloud of junk connected off an assumed switch). Is there any kind of cunning trick to detect standard layer2 switches along a path without stuff like STP?

9 12

NFSen plugin - ddd
by Andrew Jones 29 Oct '13

29 Oct '13

Hi All, Does anyone have a copy of the DDoS detection plugin for NFSen called ddd that they could send to me? According to a blog article [1] I read, it used to be available at [2]. It's not there, and I haven't had any luck trying to track it down the usual ways. If anyone is able to provide a copy, I'd appreciate it. Thanks, Jonesy [1] http://www.ccieflyer.com/2010-01-JasonRowley.php [2] http://www.synacknetworks.com/ddd/ddd.zip

3 3

Inventory and workflow management systems
by vijay gill 26 May '13

26 May '13

What software solution do people use for inventory management for things like riser/conduit drawdown, fiber inventory, physical topology store, CLR/DLR, x-connect, contracts, port inventory, etc. Any experiences in integrating workflow into those packages for work orders, modeling, drawdown levels, etc. /vijay

10 13

Quad-A records in Network Solutions ?
by Carlos Martinez-Cagnazzo 23 Apr '13

23 Apr '13

Hello all, I just received a heads-up from a friend telling me that Network Solutions is unable/unwilling to configure AAAA's for .com/.net domains. He works for a large media outlet who will be enabling IPv6 on their sites for World IPv6 Launch Day. I hope it's just a misunderstanding. If it's not, I would love to know if there is a reason for this, and if they have a timeline for supporting AAAA's. It's ok to contact me privately. regards Carlos

29 42

HSRP vs VRRP for IPv6 on IOS-XE - rekindling an old flame
by -Hammer- 31 Jan '13

31 Jan '13

A while back I brought up a discussion about IPv6 and I mentioned having some HSRP issues. Not end of the world, just adjusting to IPv6. Several folks went offline to tell me that I should dump "legacy" HSRP and go to VRRP. While I never did find anyone who could explain how HSRP is a sunset feature in IOS, I did agree with a few folks to look into VRRP for IPv6. Well I'm just now getting around to it and there is literally nothing out there. I found a few older articles implying that it's not there yet and of course I found the usual docs about RAs and SLAC and whatnot. But nothing recent. So, for those who criticized me previously about using HSRP (or anyone else) instead of VRRP, do you have VRRP up and running on Cisco IOS-XE and if so how? Can anyone provide a link or a document explaining how this is accomplished? Sample configs? Usually if you can't find it on Google or CCO it's not promising. I'm also reaching out to our AS team for guidance on the subject. PS: I'm not taunting here. It's just that several folks made the effort to go offline with me and tell me how wrong I was with HSRP and that I need to progress to VRRP and I can't find a single doc on the subject now that I look. Were these folks mistaken or am I missing something? Any help would be appreciated. -- -Hammer- "I was a normal American nerd" -Jack Herer

6 12

RE: [j-nsp] Krt queue issues
by Jensen Tyler 08 Jan '13

08 Jan '13

Look into Static route retain. Should keep the route in the forwarding table. >From Jniper site <<< Route Retention By default, static routes are not retained in the forwarding table when the routing process shuts down. When the routing process starts up again, any routes configured as static routes must be added to the forwarding table again. To avoid this latency, routes can be flagged as retain, so that they are kept in the forwarding table even after the routing process shuts down. Retention ensures that the routes are always in the forwarding table, even immediately after a system reboot. >>> Thanks, Jensen Tyler Sr Engineering Manager Fiberutilities Group, LLC -----Original Message----- From: juniper-nsp-bounces(a)puck.nether.net [mailto:juniper-nsp-bounces@puck.nether.net] On Behalf Of Benny Amorsen Sent: Wednesday, October 03, 2012 8:32 AM To: Jared Mauch Cc: Saku Ytti; juniper-nsp(a)puck.nether.net Subject: Re: [j-nsp] Krt queue issues Jared Mauch <jared(a)puck.nether.net> writes: > As far as the fallback 'default' route, if you are purchasing transit > from someone, you could consider a last-resort default pointed at > them. You can exclude routes like 10/8 etc by routing these to discard > + install on your devices. That only helps if the default gets installed first, though. If the default has to wait at boot in the krt-queue behind the 300k+ Internet-routes, I have not really gained anything... I suppose it is likely that a static default would be installed before the BGP sessions even come up. /Benny _______________________________________________ juniper-nsp mailing list juniper-nsp(a)puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

5 5