- Test - lists.nanog.org

RE: Fixed IOS datestamps?
by Steve Rude 17 Jul '03

17 Jul '03

Quick question, I'm not sure if this is applicable, but I am having some confusion of what versions of code to upgrade to, and a call to the TAC didn't help. All apologies if this is off topic at all. We are currently running 12.2(8)T5 on several of our 2600 series routers and according to the advisory, we should upgrade to 12.2(8)T10 to get the fix. I downloaded 12.2(8)T10, and the date is June 16th. ?? What gives, that seems really old for a rebuild. The same thing with 12.2(15)T5, the date is June 25th. Am I downloading the right code? I don't want to reboot every router on our network 2 times. TIA. Steve Rude -----Original Message----- From: Matthew Kaufman [mailto:matthew@eeph.com] Sent: Thursday, July 17, 2003 12:00 PM To: 'Scott Call'; nanog(a)nanog.org Subject: RE: Fixed IOS datestamps? I had the same problem, with no resolution from any of my contacts yet either (perhaps they're busy?)... In my case, 12.2(14)S is a recommended option for 7200s (but built a while back), but that leaves me wondering about 12.2(14)S2 and 12.2(14)S3 (the last of which was at least built recently). Perhaps someone on the list has already compiled a quick "here's a good set of releases for ISPs" list that covers the obvious router choices? I'm also having trouble deciphering whether or not there's an "old enough" release that isn't affected by the bug for 2511 and 2611, since the bug tool data isn't the same as the vulnerability announcement list. Matthew Kaufman matthew(a)eeph.com > -----Original Message----- > From: owner-nanog(a)merit.edu [mailto:owner-nanog@merit.edu] On > Behalf Of Scott Call > Sent: Thursday, July 17, 2003 11:52 AM > To: nanog(a)nanog.org > Subject: Fixed IOS datestamps? > > > > I started collecting the new IOS files for tonight's reboot of the > Internet, and I had a quick question. > > The datestamps on a lot of the maintainence releases are > months old, and > I just want to make sure I'm getting the right stuff, as they > say, so we > don't have to do this dance again tomorrow. > > For example, 12.0S users are recommended to go to 12.0(25)S, which at > least for the GSR is dated April 14, 2003. > > Do I have the right build of 12.0(25)S or will there be one > with a date > closer to the revelation of the exploit showing up on the > cisco FTP site? > > Thanks > -Scott >

4 3

Fixed IOS datestamps?
by Scott Call 17 Jul '03

17 Jul '03

I started collecting the new IOS files for tonight's reboot of the Internet, and I had a quick question. The datestamps on a lot of the maintainence releases are months old, and I just want to make sure I'm getting the right stuff, as they say, so we don't have to do this dance again tomorrow. For example, 12.0S users are recommended to go to 12.0(25)S, which at least for the GSR is dated April 14, 2003. Do I have the right build of 12.0(25)S or will there be one with a date closer to the revelation of the exploit showing up on the cisco FTP site? Thanks -Scott

4 3

reachability troubles
by Curtis Maurand 17 Jul '03

17 Jul '03

Hello, Folks in Massachusetts connected to Verizon DSL are reporting problems getting to websites that I host that are connected via lightship.net. When I try to traceroute to the following Verizon router (130.81.9.225) that is supposed to pass the traffic I get stopped on qwest.net. My servers are located in Kennebunk, ME. All my traffic gets interrupted at terrorist central ... er ...jfk when trying to traceroute back to my customer. Curtis Maurand President - Maine Line Systems traceroute to 130.81.9.225 (130.81.9.225), 30 hops max, 38 byte packets 1 rtr02-ssl-kenn.sslsales.com (216.204.154.1) 2.202 ms 1.516 ms 1.480 ms 2 bbr1065-pwmb.lightship.net (216.204.106.5) 8.699 ms bbr1069-pwmb.lightship.net (216.204.106.9) 8.930 ms bbr1065-pwmb.lightship.net (216.204.106.5) 10.846 ms 3 bbr7142-mhb.lightship.net (216.204.47.142) 23.908 ms 12.661 ms 12.442 ms 4 500.POS2-1.GW3.BOS4.ALTER.NET (208.192.176.97) 14.231 ms 17.420 ms 15.654 ms 5 169.at-5-0-0.XR2.BOS4.ALTER.NET (152.63.17.22) 17.087 ms 14.253 ms 15.888 ms 6 0.so-4-0-0.XL2.BOS4.ALTER.NET (152.63.16.133) 14.546 ms 14.506 ms 15.573 ms 7 0.so-2-0-0.XL2.NYC9.ALTER.NET (152.63.21.74) 24.375 ms 22.124 ms 21.916 ms 8 POS7-0.BR1.NYC9.ALTER.NET (152.63.18.221) 26.878 ms 28.162 ms 21.755 ms 9 204.255.174.130 (204.255.174.130) 26.739 ms 22.516 ms 22.692 ms 10 ewr-core-01.inet.qwest.net (205.171.17.125) 22.751 ms 22.453 ms 28.463 ms11 jfk-core-02.inet.qwest.net (205.171.8.246) 24.826 ms 28.636 ms 25.750 ms 12 jfk-core-03.inet.qwest.net (205.171.230.10) 27.942 ms 25.981 ms 30.746 ms13 jfk-edge-20.inet.qwest.net (205.171.230.17) 25.477 ms 22.836 ms 24.374 ms It times out here. -- -- Curtis Maurand mailto:curtis@maurand.com http://www.maurand.com

1 0

Cisco Security Advisory: Cisco IOS Interface Blocked by IPv4 Packet
by Cisco Systems Product Security Incident Response Team 17 Jul '03

17 Jul '03

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Cisco Security Advisory: Cisco IOS Interface Blocked by IPv4 Packet Revision 1.3 ============ Last Updated 2003 July 17 at 23:00 UTC (GMT) For Public Release 2003 July 17 at 6:10 UTC (GMT) ================= - ---------------------------------------------------------------------- Please provide your feedback on this document. - ---------------------------------------------------------------------- Contents ======== Summary Affected Products Details Impact Software Versions and Fixes Obtaining Fixed Software Workarounds Exploitation and Public Announcements Status of This Notice: INTERIM Distribution Revision History Cisco Security Procedures - ---------------------------------------------------------------------- Summary ======= Cisco routers and switches running Cisco IOS® software and configured to process Internet Protocol version 4 (IPv4) packets are vulnerable to a Denial of Service (DoS) attack. A rare sequence of crafted IPv4 packets with specific protocol fields sent directly to the device may cause the input interface to stop processing traffic once the input queue is full. No authentication is required to process the inbound packet. Processing of IPv4 packets is enabled by default. Devices running only IP version 6 (IPv6) are not affected. A workaround is available. Cisco has made software available, free of charge, to correct the problem. This advisory is available at http://www.cisco.com/warp/public/707/cisco-sa-20030717-blocked.shtml. Affected Products ================= This issue affects all Cisco devices running Cisco IOS software and configured to process Internet Protocol version 4 (IPv4) packets. Cisco devices which do not run Cisco IOS software are not affected. Devices which run only Internet Protocol version 6 (IPv6) are not affected. Details ======= Cisco routers are configured to process and accept Internet Protocol version 4 (IPv4) packets by default. A rare, specially crafted sequence of IPv4 packets with protocol type 53 (SWIPE), 55 (IP Mobility), 77 (Sun ND), or 103 (Protocol Independent Multicast - PIM) which is handled by the processor on a Cisco IOS device may force the device to incorrectly flag the input queue on an interface as full, which will cause the router to stop processing inbound traffic on that interface. This can cause routing protocols to drop due to dead timers. Interfaces which are explicitly configured to run PIM will not be affected by traffic with protocol type 103. An interface with PIM enabled will have one of the following three commands in the interface configuration: ip pim dense-mode, ip pim sparse-mode, or ip pim sparse-dense-mode. On Ethernet interfaces, Address Resolution Protocol (ARP) times out after a default time of four hours, and no traffic can be processed. The device must be rebooted to clear the input queue on the interface, and will not reload without user intervention. The attack may be repeated on all interfaces causing the router to be remotely inaccessible. A workaround is available, and is documented in the Workarounds section. The following two Cisco vulnerabilities are documented in DDTS: CSCea02355 ( registered customers only) affects all Cisco routers running Cisco IOS software. This documents the flaw with protocols 53, 55, and 77. CSCdz71127 ( registered customers only) was introduced by an earlier code revision, and documents an input queue vulnerability to protocol 103 with a device which is not configured for PIM. Any version of software which has the fix for CSCdx02283 ( registered customers only) is vulnerable. Registered customers can find more details using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl ( registered customers only) . To identify a blocked input interface, use the show interfaces command and look for the Input Queue line. If the current size (in this case, 76) is larger than the maximum size (75), the input queue is blocked. Use the show buffers command and look for the prot field. Below are two examples: Router#show interface ethernet 0/0 Ethernet0/0 is up, line protocol is up Hardware is AmdP2, address is 0050.500e.f1e0 (bia 0050.500e.f1e0) Internet address is 172.16.1.9/24 MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, rely 255/255, load 1/255 Encapsulation ARPA, loopback not set, keepalive set (10 sec) ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:41, output 00:00:07, output hang never Last clearing of "show interface" counters 00:07:18 Input queue: 76/75/1091/0 (size/max/drops/flushes); Total output drops: 0 !--- The 76/75 shows that this is blocked Router#show buffers input-interface serial 0/0 Buffer information for Small buffer at 0x612EAF3C data_area 0x7896E84, refcount 1, next 0x0, flags 0x0 linktype 7 (IP), enctype 0 (None), encsize 46, rxtype 0 if_input 0x6159D340 (FastEthernet3/2), if_output 0x0 (None) inputtime 0x0, outputtime 0x0, oqnumber 65535 datagramstart 0x7896ED8, datagramsize 728, maximum size 65436 mac_start 0x7896ED8, addr_start 0x7896ED8, info_start 0x0 network_start 0x7896ED8, transport_start 0x0 source: 212.176.72.138, destination: 212.111.64.174, id: 0xAAB8, ttl: 41, prot: 103 !--- prot: 103 is proof that this is one of the attack packets Impact ====== A device receiving these specifically crafted IPv4 packets will force the inbound interface to stop processing traffic. The device may stop processing packets destined to the router, including routing protocol packets and ARP packets. No alarms will be triggered, nor will the router reload to correct itself. This issue can affect all Cisco devices running Cisco IOS software. This vulnerability may be exercised repeatedly resulting in loss of availability until a workaround has been applied or the device has been upgraded to a fixed version of code. Software Versions and Fixes =========================== Each row of the table describes a release train and the platforms or products for which it is intended. If a given release train is vulnerable, then the earliest possible releases that contain the fix and the anticipated date of availability for each are listed in the Rebuild, Interim, and Maintenance columns. In some cases, no rebuild of a particular release is planned; this is marked with the label "Not scheduled." A device running any release in the given train that is earlier than the release in a specific column (less than the earliest fixed release) is known to be vulnerable, and it should be upgraded at least to the indicated release or a later version (greater than the earliest fixed release label). When selecting a release, keep in mind the following definitions: * Maintenance Most heavily tested and highly recommended release of any label in a given row of the table. * Rebuild Constructed from the previous maintenance or major release in the same train, it contains the fix for a specific vulnerability. Although it receives less testing, it contains only the minimal changes necessary to effect the repair. Cisco has made available several rebuilds of mainline trains to address this vulnerability, but strongly recommends running only the latest maintenance release on mainline trains. * Interim Built at regular intervals between maintenance releases and receives less testing. Interims should be selected only if there is no other suitable release that addresses the vulnerability, and interim images should be upgraded to the next available maintenance release as soon as possible. Interim releases are not available through manufacturing, and usually they are not available for customer download from CCO without prior arrangement with the Cisco Technical Assistance Center (TAC). In all cases, customers should exercise caution to be certain the devices to be upgraded contain sufficient memory and that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, contact the Cisco TAC for assistance, as shown in the section following this table. +--------------------------------------------------------------------+ |Train |Description of |Availability of Fixed Releases | | |Image or Platform | | |--------------------------+-----------------------------------------+ | 11.x based releases | Rebuild |Interim| Maintenance | |--------------------------+-----------+-------+---------------------+ |11.1CA| |11.1(36)CA4| | | | | |** | | | |------+-------------------+-----------+-------+---------------------+ |11.2 | |11.2(26e)**| | | |------+-------------------+-----------+-------+---------------------+ |11.2P | |11.2(26)P5*| | | | | |* | | | |------+-------------------+-----------------------------------------+ |11.3 | |Not scheduled | |------+-------------------+-----------------------------------------+ |11.3T | |Not scheduled | |--------------------------+-----------------------------------------+ |12.0 based releases |Rebuild |Interim|Maintenance | |--------------------------+-----------+-------+---------------------+ | |General Deployment | | | | |12.0 |release for all | | |12.0(26) | | |platforms | | | | |------+-------------------+-----------------------------------------+ |12.0DA|xDSL support: 6100,|Migrate to 12.2DA; 12.2(10)DA2 - | | |6200 |Aug-15-2003, 12.2(12)DA3 - Aug-22-2003: | | | |Engineering Specials available on | | | |request. | |------+-------------------+-----------------------------------------+ |12.0DB|Early Deployment |Migrate to 12.3(1a) | | |6400 UAC for NSP | | |------+-------------------+-----------------------------------------+ |12.0DC|Early Deployment |Migrate to 12.3(1a) | | |6400 UAC for NRP | | |------+-------------------+-----------------------------------------+ | | |12.0(24)S2 | | | | | |12.0(23)S3 | | | | | |12.0(22)S5 | | | | | |12.0(21)S7 | | | | | |12.0(19)S4 | | | | |Core/ISP support: |12.0(18)S7 | | | |12.0S |GSR, RSP, c7200, |12.0(17)S7 | |12.0(25)S | | |c10k |12.0(16)S10| | | | | |12.0(15)S7 | | | | | |12.0(14)S8 | | | | | |12.0(13)S8 | | | | | |12.0(12)S4 | | | | | |12.0(10)S8 | | | |------+-------------------+-----------------------------------------+ |12.0SC|Cable/broadband |Migrate to 12.1(19)EC | | |ISP: ubr7200 | | |------+-------------------+-----------------------------------------+ |12.0SL|100000 ESR:c10k |Migrate to 12.0(23)S3, **12.0(17)SL9 - | | | |Jul-15-2003 | |------+-------------------+-----------------------------------------+ |12.0SP|Early Deployment |Migrate to 12.0(22)S5 | |------+-------------------+-----------------------------------------+ | |Early Deployment |12.0(21)ST7| | | |12.0ST|release for Core/ |12.0(20)ST6| | | | |ISP support: GSR, |12.0(19)ST6| | | | |RSP, c7200 |12.0(17)ST8| | | |------+-------------------+-----------------------------------------+ |12.0SX|Early Deployment |Migrate to 12.0(22)S5 | |------+-------------------+-----------------------------------------+ |12.0SY|Early Deployment |Migrate to 12.0(23)S3 | |------+-------------------+-----------------------------------------+ |12.0SZ|Early Deployment |Migrate to 12.0(23)S3 | |------+-------------------+-----------------------------------------+ |12.0T |Early Deployment |12.0(7)T3**| | | |------+-------------------+-----------+-------+---------------------+ | |8510c, ls1010, | | |12.0(26)W5(28) | | |cat8540c,cat8540m, | | | | | |ls1010 | | | | | |-------------------+-----------+-------+---------------------+ | |c5atm |12.0(26)W5 | | | | | |(28a) | | | | |-------------------+-----------+-------+---------------------+ | |Cat4232 and |12.0(25)W5 | | | |12.0W5|Cat2948G-L3 |(27) | | | | |-------------------+-----------+-------+---------------------+ | |C6MSM |Engineering| | | | | |Special | | | | | |available | | | | | |on request | | | | |-------------------+-----------+-------+---------------------+ | |c5rsfc,c5rsm,C3620,| | |12.1(20) | | |C3640, C4500, | | | | | |C7200, RSP | | | | |------+-------------------+-----------+-------+---------------------+ |12.0WC|Early deployment |12.0(05)WC8| | | | |2900XL-LRE,2900XL/ | | | | | |3500XL; 2950 | | | | | |release | | | | |------+-------------------+-----------+-------+---------------------+ |12.0WT|Early deployment |Engineering| | | | |Catalyst switches: |Special | | | | |cat4840g, |Available | | | | | |upon | | | | | |request | | | |------+-------------------+-----------------------------------------+ |12.0X |Shortlived Early |All 12.0X(any letter) releases have | |(l) |Deployment Releases|migrated to either 12.0T or 12.1 unless | | | |otherwise documented in the X release | | | |technical notes pertaining to the | | | |specific release. Please check migration | | | |paths for all 12.0X releases. | |--------------------------+-----------------------------------------+ |12.1 based releases |Rebuild |Interim|Maintenance | |--------------------------+-----------+-------+---------------------+ | |General Deployment | |12.1 | | |12.1 |release for all | |(18.4) |12.1(19) | | |platforms | | | | |------+-------------------+-----------------------------------------+ |12.1AA| |Migrate to 12.2 | |------+-------------------+-----------------------------------------+ |12.1AX|Catalyst 3750 |12.1(14)EA1| | | | | |- | | | | | |Engineering| | | | | |special | | | | | |available | | | | | |upon | | | | | |request | | | |------+-------------------+-----------+-------+---------------------+ |12.1AY|Catalyst 2940 | | |12.1(13)AY | |------+-------------------+-----------------------------------------+ |12.1DA|6160 platform |Migrate to 12.2DA | |------+-------------------+-----------------------------------------+ |12.1DB|6400 UAC |Migrate to 12.3(1a) | |------+-------------------+-----------------------------------------+ |12.1DC|6400 UAC |Migrate to 12.3(1a) | |------+-------------------+-----------------------------------------+ |12.1E |Core Enterprise |12.1(8b)E14| |12.1(19)E | | |support - c7200, |12.1(13)E7 | | | | |Catalyst 6000, RSP |12.1(14)E4 | | | | | |**12.1(12c)| | | | | |E7 | | | | | |12.1(11b) | | | | | |E12- | | | | | |Aug-4-2003 | | | | | |12.1(6)E12 | | | |------+-------------------+-----------------------------------------+ |12.1EA|12.1(4)EA |Migrate to 12.1(13)EA1c | | |12.1(6)EA | | | |12.1(8)EA | | | |12.1(9)EA | | | |12.1(11)EA | | | |-------------------+-----------------------------------------+ | |12.1(12c)EA |12.1(13) | | | | |12.1(13)EA |EA1c | | | |------+-------------------+-----------+-------+---------------------+ |12.1EB|LS1010 | | |12.1(14)EB | |------+-------------------+-----------+-------+---------------------+ |12.1EC|Early Deployment | | |12.1(19)EC (scheduled| | | | | |last week of July) | |------+-------------------+-----------+-------+---------------------+ |12.1EV|Early Deployment | | |12.1(12c)EV | |------+-------------------+-----------+-------+---------------------+ |12.1EW|Early Deployment | | |12.1(13)EW,12.1(19)EW| | |Cat4000 L3 | | | | |------+-------------------+-----------+-------+---------------------+ |12.1EX|Early deployment |12.1(13)EX2| | | |------+-------------------+-----------+-------+---------------------+ |12.1EY| | |12.1(14)E4 | | | |------+---------+---------+-----------+-------+---------------------+ | | | |12.1(14)EA1| | | |12.1YJ| | |- | | | | | | |Jul-28-2003| | | |------+-------------------+-----------+-------+---------------------+ |12.1T |Early deployment |12.1(5)T15*| | | | | |* | | | |------+-------------------------------------------------------------+ |12.1X |12.1X releases generally migrate to 12.1T, 12.2 or 12.2T as | |(l) |specified below. Please refer to specific train Technical | | |notes for documented migration path. | |------+-------------------------------------------------------------+ |12.1XA|Short lived Early |Migrate to 12.1(5)T15 | | |Deployment Release | | |------+-------------------+-----------------------------------------+ |12.1XC|Short lived Early |Migrate to12.2(17) | |12.1XD|Deployment Releases| | |12.1XH| | | |12.1XI| | | |------+-------------------+-----------------------------------------+ |12.1XB|Short lived Early |Migrate to 12.2(15)T5 | |12.1XF|Deployment Releases| | |12.1XG| | | |12.1XJ| | | |12.1XL| | | |12.1XP| | | |12.1XR| | | |12.1XT| | | |12.1YB| | | |12.1YC| | | |12.1YD| | | |12.1YH| | | |------+-------------------+-----------------------------------------+ |12.1XM|Short lived Early |Migrate to 12.2(2)XB11 | |12.1XQ|Deployment Releases| | |12.1XV| | | |------+-------------------+-----------------------------------------+ |12.1XU|Short lived Early |Migrate to 12.2(4)T6 | | |Deployment Release | | |------+-------------------+-----------------------------------------+ |12.1YE|Short lived Early |Migrate to 12.2(2)YC | |12.1YF|Deployment Release | | |12.1YI| | | |--------------------------+-----------------------------------------+ |12.2 based releases |Rebuild |Interim|Maintenance | |--------------------------+-----------+-------+---------------------+ | |General Deployment |12.2(16a) | | | |12.2 |(GD) candidate for |12.2(12e) | |12.2(17) | | |all platforms |12.2(10d) | | | |------+-------------------+-----------+-------+---------------------+ |12.2B |12.2(2)B-12.2(4)B7 |12.3(1a) | | | | |-------------------+-----------+-------+---------------------+ | |12.2(4)B8-12.2(16)B|12.2(16)B1 | | | |------+-------------------+-----------+-------+---------------------+ |12.2BC|Early Deployment |12.2(15)BC1| | | | |Release |(Scheduled | | | | | |end of | | | | | |July) | | | |------+-------------------+-----------+-------+---------------------+ |12.2BW|Early Deployment |Migrate to | | | | |for use with 7200, |12.3(1a) | | | | |7400, and 7411 | | | | | |platforms | | | | |------+-------------------+-----------+-------+---------------------+ |12.2BX|Broadband/Leased | | |12.2(16)BX | | |line | | | | |------+-------------------+-----------+-------+---------------------+ |12.2BZ|Early Deployment |12.2(15)BZ1| | | | |Release | | | | |------+-------------------+-----------------------------------------+ |12.2CX|Early Deployment |Migrate to 12.1(15)BC1 | | |Release | | |------+-------------------+-----------------------------------------+ |12.2CY|Early Deployment |Migrate to 12.1(15)BC1 | | |Release | | |------+-------------------+-----------------------------------------+ |12.2DA|Early Deployment |12.2(10)DA2| | | | |Release |- | | | | | |Jul-15-2003| | | | | |12.2(12)DA3| | | | | |- | | | | | |Aug-22-2003| | | | | |Enginering | | | | | |Special | | | | | |available | | | | | |on request | | | |------+-------------------+-----------------------------------------+ |12.2DD|Early Deployment |Migrate to 12.3(1a) | | |Release | | |------+-------------------+-----------------------------------------+ |12.2DX|Early Deployment |Migrate to 12.3(1a) | | |Release | | |------+-------------------+-----------------------------------------+ |12.2JA|Cisco Aironet | | |12.2(11)JA | | |hardware platforms:| | | | | |Introduction of | | | | | |Access Point | | | | | |feature in IOS, | | | | | |Cisco 1100 Series | | | | | |Access Point | | | | | |(802.11b) | | | | |------+-------------------+-----------+-------+---------------------+ |12.2MB|Specific Technology|12.2(4)MB12| | | | |ED for 2600 7500 | | | | | |(GPRS/PDSN/GGSN | | | | | |2600/7200/7500) | | | | |------+-------------------+-----------+-------+---------------------+ |12.2MC|Early Deployment: |12.2(13)MC1| | | | |IP RAN |CCO: 7/24/ | | | | | |03 | | | |------+-------------------+-----------+-------+---------------------+ |12.2MX| |12.2(8)YD | | | | | | | | | |------+-------------------+-----------+-------+---------------------+ |12.2S |Core/ISP support: |12.2(14)S1 |12.2 | | | |GSR, RSP, c7200 | |(16.5)S| | |------+-------------------+-----------+-------+---------------------+ |12.2SX|IOS Support for |12.2(14)SX1| | | | |C6500 Supervisor 3 | | | | |------+-------------------+-----------+-------+---------------------+ |12.2SY|VPN feature release|12.2(14) | | | | |for c6k/76xx VPN |SY1, 12.2 | | | | |service module. |(8)YD | | | |------+-------------------+-----------+-------+---------------------+ |12.2SZ|7304 Platform |12.2(14)SZ2| | | |------+-------------------+-----------+-------+---------------------+ | | |12.2(15)T4/| |No more maintenance | | |New Technology |5,12.2(13) | |trains for 12.2T are | | |Early Deployment |T5, |12.2 |planned, please | |12.2T |(ED) release for |12.2(11) |(16.5)T|migrate to latest | | |all platforms |T9,12.2(8) | |12.3 Mainline | | | |T10, | |release. | | | |12.2(4)T6 | | | |------+-------------------+-----------------------------------------+ |12.2X |Short lived Early |Many short lived releases migrate to the | |(l) |Deployment Releases|same train; the trains below this point | |12.2Y |- |until the following section are not | |(l) | |grouped by strict alphabetical order, but| | | |are grouped by migration path. Please | | | |review documented migration paths for | | | |your trains. | |------+-------------------+-----------------------------------------+ |12.2XA|Short lived Early |Migrate to 12.2(11)T9 | | |Deployment Releases| | |------+-------------------+-----------------------------------------+ |12.2XS| |12.2(2)XB11 | |------+-------------------+-----------------------------------------+ |12.2XD|Short lived Early |Migrate to 12.2(15)T5 | |12.2XE|Deployment Releases| | |12.2XH| | | |12.2XI| | | |12.2XJ| | | |12.2XK| | | |12.2XL| | | |12.2XM| | | |12.2XQ| | | |12.2XU| | | |12.2XW| | | |12.2YA| | | |12.2YB| | | |12.2YC| | | |12.2YF| | | |12.2YG| | | |12.2YH| | | |12.2YJ| | | |12.2YT| | | |------+-------------------+-----------------------------------------+ |12.2YN|Short lived Early |Migrate to 12.2(13)ZH | | |Deployment Releases| | |------+-------------------+-----------------------------------------+ | |Short lived Early |Migrate to 12.2(14)SY1 available | |12.2YO|Deployment Releases|Aug-4-2003: Engineering Special | | | |available on request | |------+-------------------+-----------------------------------------+ | |Early Deployment | | | | |12.2XB|Release with |12.2(2)XB11| | | | |continuing support | | | | |------+-------------------+-----------------------------------------+ |12.2XC|Short lived Early |Migrate to 12.2(16)B1 | | |Deployment Releases| | |------+-------------------+-----------------------------------------+ |12.2XF|Short lived Early |Migrate to 12.2(15)BC1 | | |Deployment Release | | | |UBR10000 | | |------+-------------------+-----------------------------------------+ |12.2XG|Short lived Early |Migrate to 12.2(8)T10 | | |Deployment Release | | |------+-------------------+-----------------------------------------+ |12.2XN|Short lived Early |Migrate to 12.2(11)T9 | |12.2XT|Deployment Releases| | |------+-------------------+-----------------------------------------+ |12.2YD|Short lived Early |Migrate to 12.2(8)YY | | |Deployment Release | | |------+-------------------+-----------------------------------------+ |12.2YP|Short lived Early |**12.2(11) | | | | |Deployment Release |YP1 | | | |------+-------------------+-----------------------------------------+ |12.2YK| |Migrate to 12.2(13)ZC | |------+-------------------+-----------------------------------------+ |12.2YL|Short lived Early |Migrate to 12.2(13)ZH | |12.2YM|Deployment Releases| | |12.2YU| | | |12.2YV| | | |------+-------------------+-----------------------------------------+ |12.2YQ|Short lived Early |Migrate to 12.2(15)ZL | |12.2YR|Deployment Releases| | |------+-------------------+-----------------------------------------+ |12.2YS|Short lived Early |12.2(15)YS/| | | | |Deployment Release |1.2(1) | | | |------+-------------------+-----------+-------+---------------------+ |12.2YW|Short lived Early |12.2(8)YW2 | | | | |Deployment Releases| | | | |------+-------------------+-----------+-------+---------------------+ |12.2YX|Short lived Early |12.2(11)YX1| | | | |Deployment Release | | | | | |Crypto for 7100/ | | | | | |7200 | | | | |------+-------------------+-----------+-------+---------------------+ |12.2YY|Short lived Early |12.2(8)YY3 | | | | |Deployment Releases| | | | | |IOS support for | | | | | |General Packet | | | | | |Radio Service | | | | |------+-------------------+-----------+-------+---------------------+ |12.2YZ|Short lived Early |12.2(11)YZ2| | | | |Deployment Release | | | | |------+-------------------+-----------+-------+---------------------+ |12.2ZA|Short lived Early | | |12.2(14)ZA2 | | |Deployment Release | | | | |------+-------------------+-----------+-------+---------------------+ |12.2ZB|Short lived Early |12.2(8)ZB7 | | | | |Deployment Release | | | | |------+-------------------+-----------+-------+---------------------+ |12.2ZC|Short lived Early | | |12.2(13)ZC | | |Deployment Release | | | | |------+-------------------+-----------+-------+---------------------+ |12.2ZD|Short lived Early |Not | | | | |Deployment Release |Scheduled | | | |------+-------------------+-----------+-------+---------------------+ |12.2ZE|Short lived Early |12.3(1a) | | | | |Deployment Release | | | | |------+-------------------+-----------+-------+---------------------+ |12.2ZF|Short lived Early |Not | | | | |Deployment Release |Vulnerable | | | |------+-------------------+-----------+-------+---------------------+ |12.2ZG|Short lived Early |Not | | | | |Deployment Release |Vulnerable | | | |------+-------------------+-----------+-------+---------------------+ |12.2ZH|Short lived Early |Not | | | | |Deployment Release |Vulnerable | | | |------+-------------------+-----------+-------+---------------------+ |12.2ZJ|Short lived Early |12.2(15)ZJ1| | | | |Deployment Release | | | | |------+-------------------+-----------+-------+---------------------+ |12.2ZL|Short lived Early |Not | | | | |Deployment Release |Vulnerable | | | |--------------------------+-----------------------------------------+ |12.3 based releases |NOT VULNERABLE | |--------------------------------------------------------------------+ |Notes: **Marked versions of code are not available on CCO. Please | |contact TAC and request the specific images you need posted. | +--------------------------------------------------------------------+ Notes: ** Marked versions of code are not available on CCO. Please contact the Cisco TAC and request the specific images you need posted. Obtaining Fixed Software ======================== Customers with contracts should obtain upgraded software free of charge through their regular update channels. For most customers, this means that upgrades should be obtained through the Software Center on the Cisco worldwide website at http://www.cisco.com/tacpage/sw-center/sw-ios.shtml. Customers whose Cisco products are provided or maintained through prior or existing agreement with third-party support organizations such as Cisco Partners, authorized resellers, or service providers should contact that support organization for assistance with obtaining the free software upgrade(s). Customers who purchase direct from Cisco but who do not hold a Cisco service contract and customers who purchase through third-party vendors but are unsuccessful at obtaining fixed software through their point of sale should get their upgrades by contacting the Cisco Technical Assistance Center (TAC). TAC contacts are as follows. * +1 800 553 2447 (toll free from within North America) * +1 408 526 7209 (toll call from anywhere in the world) * e-mail: tac(a)cisco.com Please have your product serial number available and give the URL of this notice as evidence of your entitlement to a free upgrade. Free upgrades for non-contract customers must be requested through the TAC. Please do not contact either "psirt(a)cisco.com" or "security-alert(a)cisco.com" for software upgrades. See http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml for additional TAC contact information, including special localized telephone numbers, instructions, and e-mail addresses for use in various languages. Workarounds =========== AFTER APPLYING THE WORKAROUND the input queue depth may be raised with the hold-queue <new value> in interface command -- the default size is 75. This will allow traffic flow on the interface until the device can be reloaded. Cisco recommends that all IOS devices which process IPv4 packets be configured to block traffic directed to the router from any unauthorized source with the use of Access Control Lists (ACLs). This can be done at multiple locations, and it is recommended that you review all methods and use the combination which fits your network best. Legitimate traffic is defined as management protocols such as telnet, snmp or ssh, and configured routing protocols from explicitly allowed peers. All other traffic destined to the device should be blocked at the input interface. Traffic entering the network should also be carefully evaluated and filtered at the network edge if destined to an infrastructure device. Although network service providers must often allow unknown traffic to transit their network, it is not necessary to allow that same traffic destined to their network infrastructure. Several white papers have been written to assist in deploying these recommended security best practices. ACLs can have performance impact on certain platforms, so care should be taken when applying the recommended workarounds. Transit ACLs The following access list is specifically designed to block attack traffic. Note that the attack traffic can include spoofed source addresses. This access list should be applied to all interfaces of the device, and should include topology-specific filters. This could include filtering routing protocol traffic, management protocols, and traffic destined for the internal network. Protocol 103 is Protocol Independent Multicast (PIM), which is a commonly deployed application in multicast networks. Interfaces with PIM enabled have not been found to be vulnerable to exploit traffic with protocol 103; PIM traffic may be permitted to those select devices. access-list 101 deny 53 any any access-list 101 deny 55 any any access-list 101 deny 77 any any access-list 101 deny 103 any any !--- insert any other previously applied ACL entries here !--- you must permit other protocols through to allow normal !--- traffic -- previously defined permit lists will work !--- or you may use the permit ip any any shown here access-list 101 permit ip any any Prior to deploying ACLs that filter transit traffic, a classification ACL can be used to help identify required permit statements. A classification ACL is an ACL that permits a series of protocols. Displaying access-list entry hit counters helps determine required protocols: entries with zero packets counted are likely not required. Classification access-lists are detailed in the link below for infrastructure access-lists. Receive ACLs For distributed platforms, receive path access lists may be an option starting in Cisco IOS Software Versions 12.0(21)S2 for the c12000 and 12.0(24)S for the c7500. The receive access lists protect the device from harmful traffic before the traffic can impact the route processor. The CPU load is distributed to the line card processors and helps mitigate load on the main route processor. The white paper entitled "GSR: Receive Access Control Lists" will help you identify and allow legitimate traffic to your device and deny all unwanted packets: http://www.cisco.com/warp/customer/707/racl.html Infrastructure ACLs Although it is often difficult to block traffic transiting your network, it is possible to identify traffic which should never be allowed to target your infrastructure devices and block that traffic at the border of your network. The white paper entitled "Protecting Your Core: Infrastructure Protection Access Control Lists" presents guidelines and recommended deployment techniques for infrastructure protection ACLs: http://www.cisco.com/warp/customer/707/iacl.html Exploitation and Public Announcements ===================================== Since the initial posting of this document, the Cisco PSIRT has been made aware of public announcements of the vulnerabilities described in this advisory. PSIRT has chosen to resend to our standard distribution list immediately with further details to assist network administrators in mitigation. Status of This Notice: INTERIM ============================== This is an INTERIM notice. Although Cisco cannot guarantee the accuracy of all statements in this notice, all of the facts have been checked to the best of our ability. Cisco does not anticipate issuing updated versions of this advisory unless there is some material change in the facts. Should there be a significant change in the facts, Cisco will update this advisory. Distribution ============ This notice is posted on the Cisco worldwide website at http://www.cisco.com/warp/public/707/cisco-sa-20030717-blocked.shtml. In addition to worldwide web posting, a text version of this notice is clear-signed with the Cisco PSIRT PGP key and is posted to the following e-mail and Usenet news recipients at the public release date and time: * cust-security-announce(a)cisco.com * bugtraq(a)securityfocus.com * full-disclosure(a)lists.netsys.com * first-teams(a)first.org (includes CERT/CC) * cisco(a)spot.colorado.edu * cisco-nsp(a)puck.nether.net * nanog(a)merit.edu * sanog(a)sanog.org * comp.dcom.sys.cisco * Various internal Cisco mailing lists Future updates of this advisory, if any, will be placed on the Cisco worldwide web server. Users concerned about this problem are encouraged to check the URL given above for any updates. Revision History ================ +-------------------------------------------+ | Revision | 17-July-2003 | Initial public | | 1.0 | 0:00 GMT | release | |----------+--------------+-----------------| | | | Updated | | | | Workaround | | Revision | 17-July-2003 | section (access | | 1.1 | 6:10 GMT | lists), Updated | | | | table with | | | | information on | | | | 12.0W5 | |----------+--------------+-----------------| | | | Corrected "Last | | | | Updated" time; | | | | corrected | | Revision | 17-July-2003 | document title | | 1.2 | 10:30 GMT | of | | | | Infrastructure | | | | ACL link under | | | | Workaround | | | | section | |----------+--------------+-----------------| | | | Added "with | | | | specific | | | | protocol | | | | fields" in | | | | Summary | | | | section; | | | | updated Details | | | | section to | | | | include | | | | protocol types; | | | | added details | | Revision | 17-July-2003 | to the Cisco | | 1.3 | 23:00 GMT | vulnerabilities | | | | paragraph; | | | | added an output | | | | example to | | | | identify an | | | | attack packet; | | | | rewrote Transit | | | | ACLs section; | | | | updated | | | | Exploitation | | | | and Public | | | | Announcements | | | | paragraph | +-------------------------------------------+ Cisco Security Procedures ========================= Complete information on reporting security vulnerabilities in Cisco products, obtaining assistance with security incidents, and registering to receive security information from Cisco, is available on the Cisco worldwide website at http://www.cisco.com/warp/public/707/sec_incident_response.shtml. This includes instructions for press inquiries regarding Cisco security notices. All Cisco Security Advisories are available at http://www.cisco.com/go/psirt. - ---------------------------------------------------------------------- This notice is Copyright 2003 by Cisco Systems, Inc. This notice may be redistributed freely after the release date given at the top of the text, provided that redistributed copies are complete and unmodified, and include all date and version information. - ---------------------------------------------------------------------- Toolbar ======= All contents are Copyright © 1992-2003 Cisco Systems, Inc. All rights reserved. -----BEGIN PGP SIGNATURE----- Version: PGP 6.5.2 iQA/AwUBPxchOXsxqM8ytrWQEQLgzwCeMBqiamX2K/VvMhIgooz9d11K1VoAoLcF nmN6hA5ZuyDFBhW3o+FydDop =pSyP -----END PGP SIGNATURE-----

1 0

anyone with a clue from NTL security
by alex＠yuriev.com 17 Jul '03

17 Jul '03

Hello, If anyone who knows of anyone inside NTL security would be willing to share that info, I would greatly appreciate it. I have not been able to track anyone down there in over 3 weeks. Thanks, Alex

1 0

Re: New Cisco Vulnerability
by Eric Gauthier 17 Jul '03

17 Jul '03

On Wed, 16 Jul 2003, Eric Gauthier wrote: > > Ok, fine, don't tell the rest of use what it is, how to detect it, or how > > to defend against it. We in the university space will just do nothing > > because we have nothing to put into our IDS sensors to watch for/block it > > out. Because, you know, we're going to be the sources :) > not like you guys do anything even when we *do* notify you. Ok, I see that my humor was lost on several people who flamed me... Come on people, when have we ever looked to University networks for security! We have come a long way though. In terms of dealing with security issues, I think we've definitely moved from the level of a cable-modem end user to around the level of a Tier-2 ISP :) Eric :) PS: In case there is any confusion, from what I've seen, I think Cisco definitely did the right thing. They found a nasty bug in their lab testing. They went back and patched almost every freaking version of code, even ones people probably shouldn't be running. In terms of notifications, it first went to the US government (i.e. Homeland security, FBI, etc), then the major backbone players who comprise the core of the Internet and provide an overwhelmingly large percentage of the Internet's transit, then informed the general public. In addition, they're keeping the details secret (though I'm sure someone pretty soon will reverse-engineer the attack) but providing details on how to protect against it (i.e. upgrade or use this ACL).

1 0

Re: Cisco IOS Vulnerability
by George William Herbert 17 Jul '03

17 Jul '03

>This was rumored to be a backhoe fade but the advisory refers only to >IP services and there was nothing in the popular press about any major >phone outage, so I have my suspicions. Usually if there's a fiber cut >they say so. About this time is when all of the major backbones began >flooding the net with their notices of panic upgrades. I have unconfirmed reports from last night that Qwest had major phone and IP outages in California last night. Secondhand report from their voice support folks as 'systemwide within california'. A physical failure was indicated but not described. I wasn't able to find a report on the web at the time, though. I haven't gone back today and looked in more detail. Phantom of the Backhoe? -george william herbert gherbert(a)retro.com

3 2

Miami NANOG Feb. 2004
by Susan Harris 17 Jul '03

17 Jul '03

The next-after-next NANOG meeting (NANOG 30, our 10th anniversary) will be held February 8-10, 2004, in Miami, Florida. Our host will be Terremark, who also hosted our winter 2002 meeting. More details later - in the meantime, see you this October in Chicago for our joint meeting with ARIN.

1 0

megapath.net dns
by Len Rose 17 Jul '03

17 Jul '03

Can someone with a clue at megapath.net PLEASE fix your dns. I've been sending mail to noc@ for the last 24 hours but all I get are auto responder messages. Your forward zones don't match your reverse zones for mia.megapath.net and 74.33.69.in-addr.arpa zones. You are causing denial of service for your customers.

1 0

IOS Vulnerability
by Scott McGrath 17 Jul '03

17 Jul '03

For full details about the vulnerability see http://www.cisco.com/en/US/products/hw/routers/ps341/products_security_advi… Scott C. McGrath

1 0