- Test - lists.nanog.org

Happy Thanksgiving
by Shane Ronan 26 Nov '09

26 Nov '09

Happy Thanksgiving <eom>

1 0

Who has AS 1712?
by Stephane Bortzmeyer 26 Nov '09

26 Nov '09

% whois -h whois.ripe.net AS1712 aut-num: AS1712 as-name: FR-RENATER-ENST descr: Ecole Nationale Superieure des Telecommunications, descr: Paris, France. descr: FR % whois -h whois.arin.net AS1712 OrgName: Twilight Communications City: Wallis StateProv: TX Country: US And, yes, AS 1712 is actually used by both and announced :-(

26 59

I got a live one! - Spam source
by Russell Myba 26 Nov '09

26 Nov '09

Looks like of our customers has decided to turn their /24 into a nice little space spewing machine. Doesn't seem like just one compromised host. Reverse DNS for most of the /24 are suspicious domains. Each domain used in the message-id forwards to a single .net which lists their mailing address as a PO box an single link to an unsubscribe field. I've contacted at least three known contacts for the customer about the abuse without a single response. It would seem there are many layers to this entity: The domains are registered to one business Our billing information for the customer has one name, they colo with another person (whom the cross connect reaches) Our customer has an IT solutions person working for them (Strange since our customer and their colo provider are "IT solutions" people themselves. Abuse handle phone #s are supposedly incorrect (I called it) Besides the obvious of me at the minimum filtering port tcp/25 is their an organization that tracks businesses like these who seem like they are building a web of insulation in which to move? I think this case might interest them.

11 14

Multicast LDP or P2MP RSVP & LDP
by devang patel 26 Nov '09

26 Nov '09

Hi All, I just want to know about the deployment of Multicast LDP or P2MP RSVP and LDP is available from any vendor or they are still in draft status? Also it will be great if some one can give me an idea of Multicast VPN deployment in service providers; are they deployed with draft Rosen GRE based solution or BGP auto discovery mechanism? Thanks in advance for help... regards, Devang

2 2

AUTO: Lumír Srch ml. is out of office
by Lumir Srchlm 26 Nov '09

26 Nov '09

I am out of the office until 30.11.2009. Na Vas e-mail odpovim co nejdrive. V pripade urgentnich problemu prosim kontaktujte helpdesk. I will answer your e-mail as soon as possible. Your e-mail will not be forwarded. Please contact helpdesk for urgent issues. Dekuji za pochopení Lumir Srch ml. Note: This is an automated response to your message "Re: I got a live one! - Spam source" sent on 26.11.09 1:16:53. This is the only notification you will receive while this person is away.

1 0

fight club :) richard bennett vs various nanogers, on paid peering
by ops.lists＠gmail.com 25 Nov '09

25 Nov '09

http://gigaom.com/2009/11/22/how-video-is-changing-the-internet/ Does the FTC's question 106 hurt paid peering or not? 88 comments. Makes real interesting reading, I must say. srs

14 25

<Help --> Having trouble trying to activate a GigE connection>
by Michael Ruiz 25 Nov '09

25 Nov '09

Group, I am having an issue with activating a Gige interface between a Cisco 7206 VXR w/IO-1GE module to a 7606 w/sup720-3bxls connecting to a line module WS-X6416-GBIC. I have verified that the GBIC-MMF have good light reading and the MMF fiber jumper are not reversed. The GigE connection comes up briefly for about a few seconds, takes a burst of errors and goes down. I have tried to set the speed to nonegotiate on both ends, set one end to speed auto. No dice. Here is the copy of the configuration. On my 7606 I show that the GigE interface is up/up but on the 7206vxr I show down/down. Any help will be greatly appreciated. Thanks! This is the Cisco 7206VXR configuration. interface GIabitEthernet0/0 no ip address duplex full speed 1000 media-type gbic no negotiation auto This is the Cisco 7606 configuration. interface GigabitEthernet1/8 description AR4-DLLSTXHW-GE0/0 no ip address speed nonegotiate Michael Ruiz Network Engineer

4 5

iGlass CMTS monitoring solution
by Eric J Esslinger 25 Nov '09

25 Nov '09

We've been looking at the iGlass's cable system monitoring solution for monitoring our cable system; It integrates with billing to give the ability, at a csr level, to allow them to directly lookup the status of a customer's cable modem (for example, online, offline, negotiationg, flapping), history, and also integrates with the CMTS and will make SNMP polls of the modems to see signal levels, CPE's attached, configured speed vs current actual speed, etc. I was wondering if anyone had any comments for or against them, or of alternative companies or even open source alternatives. I'm perfectly fine with 'roll your own' but Nagios/cacti type monitoring really just doesn't cut it where this is concerned. We're < 10k customers. Contacting me offlist is fine. Thanks. __________________________ Eric Esslinger Information Services Manager - Fayetteville Public Utilities http://www.fpu-tn.com/ (931)433-1522 ext 165 ________________________________ This message may contain confidential and/or proprietary information and is intended for the person/entity to whom it was originally addressed. Any use by others is strictly prohibited.

1 0

Tishman Neutral Exchange space
by Marshall Eubanks 25 Nov '09

25 Nov '09

Hello; There is a new carrier neutral exchange space opening up December 1st at 165 Halsey in Newark, NJ. This space will be operated by Tishman Hotel & Realty LP : http://www.datacentermap.com/usa/new-jersey/newark/165-halsey.html I am thinking of moving into there and I would be curious to hear feedback from anyone with experience in being in a Tishman operated exchange space. I think that replies should be off-list, please. Regards Marshall

2 1

Re: [c-nsp] is a DWDM SFP a DWDM SFP?
by ML 25 Nov '09

25 Nov '09

Bill Blackford wrote: > I do not believe that Juniper keys their optics. My experience with this is limited though. I am able to get third-party optics to work just fine in EX switches. > > bblackford@wsc-asw-02-1> show chassis hardware > Hardware inventory: > Item Version Part number Serial number Description > Chassis BH0208188142 EX3200-24T > FPC 0 REV 07 750-021261 BH0208188142 EX3200-24T, 8 POE > CPU BUILTIN BUILTIN FPC CPU > PIC 0 BUILTIN BUILTIN 24x 10/100/1000 Base-T > PIC 1 REV 04 711-021270 AR0209216364 4x GE SFP > Xcvr 0 NON-JNPR FFX20H700284 SFP-SX > Power Supply 0 REV 02 740-020957 AT0508119769 PS 320W AC > Fan Tray Fan Tray > > As you can see it identifies the Xcvr as non-Juniper. > > > On the Cisco side, I have a Vertex 1310M GLC-LH-SM that is working fine in a 3560G. > > -b > Correct me if I'm wrong but there are good and bad 3rd party SFPs. The good ones being the SFPs with their EEPROM set to appear to be Cisco kit.

1 0