December 2014 - Test - lists.nanog.org

Re: NANOG NYC Event
by Fisher, Shawn 30 Jul '25

30 Jul '25

Personally I like dinosaur bbq, great malt beverages as well, and also blue smoke is great and if you like jazz, check out downstairs. -------------------------- Sent using BlackBerry -----Original Message----- From: andrew young To: Scott Brim CC: nanog(a)nanog.org Sent: Sat May 31 18:28:57 2008 Subject: Re: NANOG NYC Event Speaking of food, ill be going to the Big Apple BBQ fest next weekend: http://bigapplebbq.org/2008/ If you love to eat BBQ, this is a big MUST to cap off your stay in NYC. if you do decided to go, be sure to get the Fastpass: http://www.bigapplebbq.org/2008/index.php?s=fastpass You dont want to wait 30 mins online for food. Don't forget a bib and leave your belt at home. :-) - ------------------------------------ Andrew Young Webair Internet Development, Inc Phone: 1 866 WEBAIR 1 FAX: 516.938.5100 http://www.webair.com andrewy(a)webair.com ------------------------------------- We are interested in any feedback you might have about the service you received. Please contact our technical support consumer care manager directly at 1.866.WEBAIR1 or e-mail customercare(a)webair.com ------------------------------------- On Sat, 2008-05-31 at 18:17 -0400, Scott Brim wrote: > On 5/31/08 12:36 PM, Rod Beck allegedly wrote: > > I strongly suggest that those heading to New York visit the great > > musems, architecture (Saint Patrick's Cathedral), and restaurants. > > You have the American Museum of Natural History, which includes an > > excellent Planetarium and just on the other side of Central Park, the > > Metropolitan Museum of Art and the Guggenheim. There are excellent > > Chinese and Indian restaurants in Lower Manhattan. > > Don't forget about Brooklyn in all this Manhattan praise :-). Consider > the Brooklyn Botanic Garden. It's too late for cherries but the rose > collections will be great. And the best pizza in New York (if you can > get in) is at > http://menupages.com/restaurantdetails.asp?areaid=0&restaurantid=31402&neig… >

15 17

Multi-port RFC2544/EtherSAM loopback appliance
by Jason Lixfeld 25 May '17

25 May '17

Group, I'm looking for options and opinions on a cost effective, multi-port (6'ish port SFP/SFP+) RFC2544/EtherSAM rack appliance that can act as the remote/loopback for our field installers' portable RFC2544/EtherSAM enabled Exfo test sets. I came across XenaNetworks XenaCompact which looks like it would fit the bill, but I'm sure there are others (save Ixia, Exfo and Fluke, which I'm pretty much excluding by default because I imagine they are likely completely out to lunch on price relative to the extremely simplified feature set we require). Thanks in advance.

5 4

Recommendations, Colo Reno, Albuquerque, Phoenix, Las Vegas
by Eric A Louie 21 Jun '16

21 Jun '16

Does anyone have recommendations for Colocation space in any of those 4 cities? thanks Eric

4 3

Public DNS64
by Tim Durack 01 Jun '16

01 Jun '16

Anyone know of a reliable public DNS64 service? Would be cool if Google added a Public DNS64 service, then I could point the NAT64 prefix at appropriately placed boxes in my network. Why? Other people are better than me at running DNS resolvers :-) -- Tim:>

10 21

Juniper MX Sizing
by Graham Johnston 15 Mar '16

15 Mar '16

I am wondering if anyone can provide their real world experience about sizing Juniper MX routers as it relates to BGP. I am needing a device that has a mix of layer 2 and 3 features, including MPLS, that will have a very low port count requirement that will primarily be used at a remote POP site to connect to the local IX as well as one or two full route transit providers. The MX104 has what I need from a physical standpoint and a data plane standpoint, as well as power consumption figures. My only concern is whether the REs have enough horsepower to churn through the convergence calculations at a rate that operators in this situation would find acceptable. I realize that 'acceptable' is a moving target so I would happily accept feedback from people using them as to how long it takes and their happiness with the product. For those of you that deem the MX104 unacceptable in this kind of role and moved up to the MX240, what RE did you elect to use? Thanks, Graham Johnston Network Planner Westman Communications Group 204.717.2829 johnstong(a)westmancom.com<mailto:johnstong@westmancom.com> P think green; don't print this email.

10 15

common checks performed when passing on an IPv4 PA allocation from one end-customer to another
by Martin T 23 Feb '16

23 Feb '16

Hi, when one end-customer has been using for example /24 IPv4 allocation for a while and returns this(for example changes an ISP) to LIR, then are there some good practices before handing out this same /24 to a new customer? I guess LIR should: 1) remove all the DNS PTR records, classless of classful delegations 2) check if some of the IP addresses are in DNSBL(maybe the previous customer was a spammer). Example with 93.184.216.0/24: $ for ip in {0..255}.216.184.93;\ > do for addr in \ > cbl.abuseat.org \ > dnsbl.inps.de \ > no-more-funn.moensted.dk \ > dnsbl.sorbs.net \ > bl.spamcannibal.org \ > bl.spamcop.net \ > psbl.surriel.com \ > dnsrbl.swinog.ch; \ > do dig @8.8.8.8 "$ip"."$addr" +short | grep -q "^127.0.0." && \ > echo "DNSBL-Alarm: $ip is listed on $addr"; done; done $ Anything else? regards, Martin

2 4

Big day for IPv6 - 1% native penetration
by Tomas Podermanski 06 Jan '16

06 Jan '16

Hi, It seems that today is a "big day" for IPv6. It is the very first time when native IPv6 on google statistics (http://www.google.com/intl/en/ipv6/statistics.html) reached 1%. Some might say it is tremendous success after 16 years of deploying IPv6 :-) T.

87 261

VZW - fixed wireless services?
by Ryan Finnesey 20 Jun '15

20 Jun '15

Does anyone know if Verizon is using its LTE network to offer fixed wireless services? I know Sprint was working on WiMAX hardware with cisco but I assume that was canceled when Sprint started moving to LTE. Cheers Ryan

3 4

How are you doing DHCPv6 ?
by Randy Carpenter 02 Apr '15

02 Apr '15

I am wondering how people out there are using DHCPv6 to handle assigning prefixes to end users. We have a requirement for it to be a redundant server that is centrally located. DHCPv6 will be relayed from each customer access segment. We have been looking at using ISC dhcpd, as that is what we use for v4. However, it currently does not support any redundancy. It also does not do very much useful logging for DHCPv6 requests. Certainly not enough to keep track of users and devices. So, my questions are: How are you doing DHCPv6 with Prefix Delegation? What software are you using? When DHCPv6 with Prefix Delegation seems to be about the only way to deploy IPv6 to end users in a generic device-agnostic fashion, I am wondering why it is so difficult to find a working solution. thanks, -Randy -- | Randy Carpenter | Vice President - IT Services | Red Hat Certified Engineer | First Network Group, Inc. | (800)578-6381, Opt. 1 ----

13 37

Generating IPv6 list with filtergen.level3.net
by Smith, Courtney 28 Mar '15

28 Mar '15

Anyone out there know how to generate a IPv6 list Level3's filtergen? I tried Google but didn't find anything. () ascii ribbon campaign - against html e-mail /\ www.asciiribbon.org - against proprietary attachments

4 4