July 2013 - Test - lists.nanog.org

Re: .nyc - here we go...
by Larry Sheldon 04 Jul '13

04 Jul '13

On 7/4/2013 8:02 PM, Eric Brunner-Williams wrote: > And this was true when the v6 and DEC requirements entered the DAG? OK, I 'fess to terminal stupidity--in this contest: "DEC"? "the DAG"? > Why are the people who don't follow the shitty process so full of > confidence they have all the clue necessary? A job requirement? Genetic links to DESIRABLE characteristics? Comes with the territory? -- Requiescas in pace o email Two identifying characteristics of System Administrators: Ex turpi causa non oritur actio Infallibility, and the ability to learn from their mistakes. (Adapted from Stephen Pinker)

2 2

What are y'all doing for CALEA compliance?
by Ben Bartsch 04 Jul '13

04 Jul '13

What are you RENs out there doing for CALEA compliance? Is there actually any teeth to the law? Our systems guys have tried a product called 'Open CALEA' but the router and the server simply can't keep up with mirroring from a 10Gbps connection into a 1Gbps link. I'm no legal expert either....any lawyers on this list? Thanks for all the great advice. This is a great community! -ben

6 10

Re: Ciena 6200 clue?
by Bryan Fields 04 Jul '13

04 Jul '13

On 7/3/13 9:32 PM, Christopher Morrow wrote: > honestly? this sounds like typical alu :( > some of their kit requires either proxy-arp from the default-gw (and > no support for default-gw, all of the 'internet' is out the management > ether... on that ether link) or 'can we run ospf with your router?' > > what?? you put ospf processing/handling/debugging (ha!) but you can't > point 0/0 at that ip over -> there?? wtf The older microwave radios were like this. Most other vendors just put a serial console on the product at 9600n8 to do a basic config (power, channel, etc). Not ALU. The radio sets up a PPP connection on the serial port and that connects to a windows laptop (XP sp1 or older, win2k works best). Now do you think they use IP for this? nope! ISO CLNS and ISIS to find the radio. Only after these 5 things go right, may you fire up the java GUI that actually talks to it. After about 10 min, it should be up and might talk to it. Now on the odd chance it does not work (shocking, right?), you get to trouble shoot it. Better break out the Italian to English dictionary, all the error messages are in Italian. Thankfully the IP routing development team does not have these issues. Most possess a good amount of clue. -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net

1 0

Re: .nyc - here we go...
by Larry Sheldon 04 Jul '13

04 Jul '13

Makes me wonder if concern for routing table size is worrying about the right thing. -- Requiescas in pace o email Two identifying characteristics of System Administrators: Ex turpi causa non oritur actio Infallibility, and the ability to learn from their mistakes. (Adapted from Stephen Pinker)

5 5

Re: Perl router snmp to DNS
by Courtney Smith 03 Jul '13

03 Jul '13

On Jul 3, 2013, at 5:30 PM, nanog-request(a)nanog.org wrote: > Message: 1 > Date: Wed, 3 Jul 2013 08:37:09 -0400 (EDT) > From: "Justin M. Streiner" <streiner(a)cluebyfour.org> > To: "nanog(a)nanog.org" <nanog(a)nanog.org> > Subject: Re: Perl router snmp to DNS > Message-ID: <Pine.LNX.4.64.1307030835280.6510(a)whammy.cluebyfour.org> > Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed > > On Wed, 3 Jul 2013, Jensen Tyler wrote: > >> My Google fu is failing. Can anybody point me to a script that will >> create DNS entries from router snmp info? > > I don't recall ever having seen anything like that as a pre-built package > or Perl module. If I understand what you're trying to do, that might be > tough to as a one-size-fits-all module, because different organizations > have vastly different network device naming conventions. > > jms These were provided in a post from 10/2012. Search archives for "Semi-automated L3 interface DNS records". https://gist.github.com/oogali/778830 http://cluepon.net/ras/generate_dnsptr_generic_php Courtney Smith courtneysmith(a)comcast.net () ascii ribbon campaign - against html e-mail /\ www.asciiribbon.org - against proprietary attachments

1 0

Ciena 6200 clue?
by Jason Lixfeld 03 Jul '13

03 Jul '13

So I've got a bunch of Ciena 6200 kit in, with some of their professional services folks onsite, helping with the initial setup. I know nothing of this kit, other than from what I'm being told, it's pretty bleeding edge, so much so that not even many people at Ciena know how to use it. The SE who's onsite is apparently claiming that there is no provision to set a default gateway on the management interface. This seems odd to me. What is more odd is that we have to buy a manual for it. There isn't an electronic version available, even. I've created an account on their portal, so when that gets approved, I'll see what sort of documentation I can find, but off the top of anyone's head, does anyone know how to do this default gateway thing on the management interface? It's apparently been IP'd properly, so that much is working... Thanks in advance. Sorry for the lack of content otherwise.

7 10

RE: Ciena 6200 clue?
by Phil Bedard 03 Jul '13

03 Jul '13

Right that is the "workaround." :) Phil From: Bryan Fields Sent: 7/3/2013 18:15 To: NANOG list Subject: Re: Ciena 6200 clue? On 7/3/13 5:41 PM, Phil Bedard wrote: > The ALU 7750/7450, etc. routers have a separate routing > process/configuration for their OOB mgmt and as of the last time I looked > do not support a default gateway. Well you can set up multiple static routes. The only route you can't set it 0/0. This will work, though I'd suggest only putting the management routes it needs in it. A:Milhouse>bof# static-route 0.0.0.0/0 next-hop 1.0.0.2 MINOR: SYSTEM #1505 Invalid static route destination prefix - cannot configure default route on the management interface A:Milhouse>bof# static-route 0.0.0.0/1 next-hop 1.0.0.2 *A:Milhouse>bof# static-route 128.0.0.0/1 next-hop 1.0.0.2 *A:Milhouse>bof# show bof =============================================================================== BOF (Memory) =============================================================================== primary-image nope.jpg primary-config Milhouse/config.cfg address 1.0.0.70/24 active primary-dns 1.0.0.2 dns-domain nope.jpg static-route 0.0.0.0/1 next-hop 1.0.0.2 static-route 128.0.0.0/1 next-hop 1.0.0.2 autonegotiate duplex full speed 100 wait 4 persist on no li-local-save no li-separate console-speed 115200 =============================================================================== -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net

1 0

Re: Ciena 6200 clue?
by Bryan Fields 03 Jul '13

03 Jul '13

On 7/3/13 5:41 PM, Phil Bedard wrote: > The ALU 7750/7450, etc. routers have a separate routing > process/configuration for their OOB mgmt and as of the last time I looked > do not support a default gateway. Well you can set up multiple static routes. The only route you can't set it 0/0. This will work, though I'd suggest only putting the management routes it needs in it. A:Milhouse>bof# static-route 0.0.0.0/0 next-hop 1.0.0.2 MINOR: SYSTEM #1505 Invalid static route destination prefix - cannot configure default route on the management interface A:Milhouse>bof# static-route 0.0.0.0/1 next-hop 1.0.0.2 *A:Milhouse>bof# static-route 128.0.0.0/1 next-hop 1.0.0.2 *A:Milhouse>bof# show bof =============================================================================== BOF (Memory) =============================================================================== primary-image nope.jpg primary-config Milhouse/config.cfg address 1.0.0.70/24 active primary-dns 1.0.0.2 dns-domain nope.jpg static-route 0.0.0.0/1 next-hop 1.0.0.2 static-route 128.0.0.0/1 next-hop 1.0.0.2 autonegotiate duplex full speed 100 wait 4 persist on no li-local-save no li-separate console-speed 115200 =============================================================================== -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net

1 0

Leap Second
by Todd S 03 Jul '13

03 Jul '13

We found we got leap seconds added on some systems over the weekend. There were no leap seconds planned ( http://www.usno.navy.mil/USNO/earth-orientation/leap-second-announcement) however some of our systems got one. We run our own s2/s3/s4 system, with only the s2s going to the Internet. We have about 20 servers defined there, but looking through the logs, I can't figure out which one(s) may have been advertising the leap second. I went through all our systems on Friday and Saturday to check for the leap bit, but had nothing, so it must have come out on Sunday. Anyone else run in to this, or have any further intel about servers that advertised the leap second? Cheers, Todd.

8 10

10G Wave from NJ to NY
by Dan Armstrong 03 Jul '13

03 Jul '13

Would anybody out there have a 10G wave for sale on a route between 165 Halsey in Newark and 60 Hudson in New York that crosses the Hudson River at or south of the Holland Tunnel? Possibly in the rail tunnel between World Trade Centre station and Exchange Place? Off list replies are great. Thanks!

1 0