November 2013 - Test - lists.nanog.org

common checks performed when passing on an IPv4 PA allocation from one end-customer to another
by Martin T 22 Feb '16

22 Feb '16

Hi, when one end-customer has been using for example /24 IPv4 allocation for a while and returns this(for example changes an ISP) to LIR, then are there some good practices before handing out this same /24 to a new customer? I guess LIR should: 1) remove all the DNS PTR records, classless of classful delegations 2) check if some of the IP addresses are in DNSBL(maybe the previous customer was a spammer). Example with 93.184.216.0/24: $ for ip in {0..255}.216.184.93;\ > do for addr in \ > cbl.abuseat.org \ > dnsbl.inps.de \ > no-more-funn.moensted.dk \ > dnsbl.sorbs.net \ > bl.spamcannibal.org \ > bl.spamcop.net \ > psbl.surriel.com \ > dnsrbl.swinog.ch; \ > do dig @8.8.8.8 "$ip"."$addr" +short | grep -q "^127.0.0." && \ > echo "DNSBL-Alarm: $ip is listed on $addr"; done; done $ Anything else? regards, Martin

2 4

Big day for IPv6 - 1% native penetration
by Tomas Podermanski 05 Jan '16

05 Jan '16

Hi, It seems that today is a "big day" for IPv6. It is the very first time when native IPv6 on google statistics (http://www.google.com/intl/en/ipv6/statistics.html) reached 1%. Some might say it is tremendous success after 16 years of deploying IPv6 :-) T.

87 261

How are you doing DHCPv6 ?
by Randy Carpenter 02 Apr '15

02 Apr '15

I am wondering how people out there are using DHCPv6 to handle assigning prefixes to end users. We have a requirement for it to be a redundant server that is centrally located. DHCPv6 will be relayed from each customer access segment. We have been looking at using ISC dhcpd, as that is what we use for v4. However, it currently does not support any redundancy. It also does not do very much useful logging for DHCPv6 requests. Certainly not enough to keep track of users and devices. So, my questions are: How are you doing DHCPv6 with Prefix Delegation? What software are you using? When DHCPv6 with Prefix Delegation seems to be about the only way to deploy IPv6 to end users in a generic device-agnostic fashion, I am wondering why it is so difficult to find a working solution. thanks, -Randy -- | Randy Carpenter | Vice President - IT Services | Red Hat Certified Engineer | First Network Group, Inc. | (800)578-6381, Opt. 1 ----

13 37

Generating IPv6 list with filtergen.level3.net
by Smith, Courtney 28 Mar '15

28 Mar '15

Anyone out there know how to generate a IPv6 list Level3's filtergen? I tried Google but didn't find anything. () ascii ribbon campaign - against html e-mail /\ www.asciiribbon.org - against proprietary attachments

4 4

Call for Presentations RIPE 68
by Filiz Yilmaz 12 Feb '14

12 Feb '14

Dear colleagues, Please find the CFP for RIPE 68 below or at https://ripe68.ripe.net/submit-topic/cfp/. The deadline for submissions is 2 March 2014. Please also note that speakers do not receive any extra reduction or funding towards the meeting fee at the RIPE Meetings. Kind regards Filiz Yilmaz RIPE PC Chair http://www.ripe.net/ripe/meetings/ripe-meetings/pc --------------------- Call for Presentations A RIPE Meeting is an open event where Internet Service Providers, network operators and other interested parties get together. Although the meeting is mostly technical, it is also a chance for people to meet and network with others in their field. RIPE 68 will take place from 12 – 16 May 2014 in Warsaw, Poland. The RIPE Programme Committee (PC) is now seeking content proposals from the RIPE community for the plenary session presentations, BoFs (Birds of a Feather sessions), panels, workshops, tutorials and lightning talks at RIPE 68. The PC is looking for presentations covering topics of network engineering and operations, including but not limited to: • IPv6 deployment • Managing IPv4 scarcity in operations • Commercial transactions of IPv4 addresses • Data centre technologies • Network and DNS operations • Internet governance and regulatory practices • Network and routing security • Content delivery • Internet peering and mobile data exchange Submissions RIPE Meeting attendees are quite sensitive to keeping presentations non-commercial, and product marketing talks are strongly discouraged. Repeated audience feedback shows that the most successful talks focus on operational experience, research results, or case studies. For example, presenters wishing to describe a commercial solution should focus on the underlying technology and not attempt a product demonstration. The RIPE PC accepts proposals for different presentation formats, including plenary session presentations, tutorials, workshops, BoFs (Birds of a Feather sessions) and lightning talks. See the full descriptions of these formats at https://ripe68.ripe.net/submit-topic/presentation-formats/ Presenters who are proposing a panel or BoF are encouraged to include speakers from several (perhaps even competing) companies and/or a neutral facilitator. In addition to presentations selected in advance for the plenary, the RIPE PC also offers several time slots for “lightning talks”, which are selected immediately before or during the conference. The following general requirements apply: - Proposals for plenary session presentations, BoFs, panels, workshops and tutorials must be submitted for full consideration no later than 2 March 2014, using the meeting submission system at https://ripe68.ripe.net/submit-topic/guidelines/. Proposals submitted after this date will be considered on a space-available basis. - Lightning talks should also be submitted using the meeting submission system (https://ripe68.ripe.net/submit-topic/submission-form/) and can be submitted just days before the RIPE Meeting starts or even during the meeting week. The allocation of lightning talk slots will be announced in short notice – in some cases on the same day but often one day prior to the relevant session. - Presenters should indicate how much time they will require. See more information on time slot allocations per presentation format at https://ripe68.ripe.net/submit-topic/presentation-formats/ - Proposals for talks will only be considered by the PC if they contain at least draft presentation slides (slides may be updated later on). For panels, proposals must contain a clear description, as well as the names of invited panelists, presenters and moderators. - Due to potential technical issues, it is expected that most, if not all, presenters/panelists will be physically present at the RIPE Meeting. If you have any questions or requests concerning content submissions, please email pc [at] ripe [dot] net. ---------------------

1 1

AT&T UVERSE Native IPv6, a HOWTO
by Andrew D Kirch 09 Jan '14

09 Jan '14

Special thanks to Alexander from AT&T's "Tier-2" dept, though my suspicion is that that is not where he works, as he seems exceptionally clueful. Additional thanks to Owen DeLong who finally got me off my ass to actually do this, I'll see you in the sky! Ok, is this core routing? not really, but it's nice to see a major clue injection over at AT&T Uverse. I'm using this to document the MASSIVE bureaucratic PITA which is getting native IPv6 on uverse. You'll start from the default service on a 2wire "modem" (for values of modem that equate to profanity). If you have the Motorola NVG589, count yourself lucky and skip most of these steps. Abandon all hope ye who enter here.... Step 1: contact AT&T Uverse support and complain that you need IPv6 (because we all need it, I in fact do for work). Step 2: general confusion as the level 1 droid doesn't know what IPv6 is, politely request to be transferred to tier 2 step 3: you will be told that tier 2 is a paid service, invoke the almighty FCC and ask to speak with a supervisor, expect a long hold here. step 4: you arrive at tier 2, mention that IPv6 won't work on your 2wire and that AT&T has broken your protocol 41 tunnel with <insert tunnel broker here, usually HE> step 5: you'll need to get your 2wire replaced with a Motorola NVG589. Again you will be threatened with a cost to upgrade, mine was waived due to the work requirement. I'd guess some additional complaining and escalation will get this fee waived. My recollection was it was $100. The new modem is good news for quite a few reasons, the 2wire sucks, the Motorola sucks significantly less, and has a built in battery backup, but mine lacked the battery. step 6: you'll receive the motorola by mail, or have a tech install it, they actually had a tech in my area and I had an AT&T tech at my door in less than 20 minutes from when I got off the phone with tier-2 (I about died from the shock). step 7: configure the motorola (192.168.1.254) for passthrough, DHCPS-dynamic, disable the firewall, the "advanced" firewall, hpna, wireless, etc. Step 8: reboot to push the public IP to your real router. step 9: head over to the Motorola's home network tab, and in the status window you'll see: IPv6 Status Available Global IPv6 Address 2602:306:cddd:xxxx::1/64 Link-local IPv6 Address fe80::923e:abff:xxxx:7e40 Router Advertisement Prefix 2602:306:cddd:xxxx::/64 IPV6 Delegated LAN Prefix 2602:306:cddd:xxxx:: 2602:306:cddd:xxxx:: In reality additional poking leads me to believe AT&T gives you a rather generous /60, but how to use it? step 10: set up dhcpv6, example for mikrotik follows (but should be easily convertible to nearly any router): /ipv6> export # dec/31/2001 20:26:03 by RouterOS 6.6 # software id = 5F2Y-X73L # /ipv6 address add address=2602:306:cddd:xxxx::1 from-pool=AT&T interface=bridge1 /ipv6 dhcp-client add add-default-route=yes interface=ether10 pool-name=AT&T I hope that this is of help to someone. Andrew

36 101

Data Center and IX Standards Published by Open-IX - Certification begins soon!
by David Temkin 26 Dec '13

26 Dec '13

I am proud to announce that the final versions of the Data Center and IXP standards have been completed by their respective working groups and have been published. Data Center: http://goo.gl/s4cGBp IXP: http://goo.gl/O5I1my Martin Hannigan will follow up shortly with scheduled dates for accepting applications to become Open-IX Certified. We intend on accepting applications for Northern Virginia first, immediately followed by NYC and other markets. Regards, -Dave Temkin Chair, Open-IX Association

2 1

ddos attacks
by sgraun＠airstreamcomm.net 20 Dec '13

20 Dec '13

I’m curious to know what other service providers are doing to alleviate/prevent ddos attacks from happening in your network. Are you completely reactive and block as many addresses as possible or null0 traffic to the effected host until it stops or do you block certain ports to prevent them. What’s the best way people are dealing with them? Scott

22 32

What routers do folks use these days?
by Jawaid Desktop 11 Dec '13

11 Dec '13

We're a service provider, and we have a network full of Cat6509's. We are finding that we are outgrowing them from the standpoint of their ability to handle lots of large routing tables. Obviously their switching capability is still superb but one of them with 20 peers is starting to groan a bit and RAM is going to be an issue soon. What do people use these days? Our backbone needs in the next 2-3 years are going to be sub-100Gbps. Jawaid

19 18

bgp traceroute tool?
by John Conner 04 Dec '13

04 Dec '13

Hi there, is there any tools available under linux which can do bgp traceroute? (print bgp AS numbers for each traceroute hop ) , i googled and found nothing. thanks John

11 12