January 2013 - Test - lists.nanog.org

Big day for IPv6 - 1% native penetration
by Tomas Podermanski 06 Jan '16

06 Jan '16

Hi, It seems that today is a "big day" for IPv6. It is the very first time when native IPv6 on google statistics (http://www.google.com/intl/en/ipv6/statistics.html) reached 1%. Some might say it is tremendous success after 16 years of deploying IPv6 :-) T.

87 261

How are you doing DHCPv6 ?
by Randy Carpenter 02 Apr '15

02 Apr '15

I am wondering how people out there are using DHCPv6 to handle assigning prefixes to end users. We have a requirement for it to be a redundant server that is centrally located. DHCPv6 will be relayed from each customer access segment. We have been looking at using ISC dhcpd, as that is what we use for v4. However, it currently does not support any redundancy. It also does not do very much useful logging for DHCPv6 requests. Certainly not enough to keep track of users and devices. So, my questions are: How are you doing DHCPv6 with Prefix Delegation? What software are you using? When DHCPv6 with Prefix Delegation seems to be about the only way to deploy IPv6 to end users in a generic device-agnostic fashion, I am wondering why it is so difficult to find a working solution. thanks, -Randy -- | Randy Carpenter | Vice President - IT Services | Red Hat Certified Engineer | First Network Group, Inc. | (800)578-6381, Opt. 1 ----

13 37

Generating IPv6 list with filtergen.level3.net
by Smith, Courtney 28 Mar '15

28 Mar '15

Anyone out there know how to generate a IPv6 list Level3's filtergen? I tried Google but didn't find anything. () ascii ribbon campaign - against html e-mail /\ www.asciiribbon.org - against proprietary attachments

4 4

Blocking private AS
by Thomas Magill 27 Nov '13

27 Nov '13

I am thinking about implementing a filter to block all traffic with private AS numbers in the path. I see quite a few in my table though so I am concerned I might block some legitimate traffic. In some cases, these are just prefixes with the private appended to the end but a few have the private as a transit. Is this a good idea or would I likely be blocking too much legitimate traffic? The filter I am using currently shows the following: BGP table version is 5462394, local router ID is 209.112.253.4 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path * i58.68.109.0/24 x.x.x.x 0 100 0 6130 9498 10201 65534 i *> y.y.y.y 0 6130 9498 10201 65534 i * i68.115.224.0/24 x.x.x.x 0 100 0 6130 19151 20115 65011 i *> y.y.y.y 0 6130 19151 20115 65011 i * 85.112.22.0/24 y.y.y.y 0 6130 6939 23148 64532 64532 64532 64532 64532 64532 64532 64532 64532 i *> 93.189.194.0/24 y.y.y.y 0 6130 3549 39386 39386 39386 25233 65000 47146 i * i x.x.x.x 0 100 0 6130 3549 39386 39386 39386 25233 65000 47146 i *> 96.60.243.0/24 y.y.y.y 0 6130 2828 4181 65528 i * i x.x.x.x 0 100 0 6130 2828 4181 65528 i * i96.61.232.0/24 x.x.x.x 0 100 0 6130 2828 4181 65527 i *> y.y.y.y 0 6130 2828 4181 65527 i * i96.61.233.0/24 x.x.x.x 0 100 0 6130 2828 4181 65527 i *> y.y.y.y 0 6130 2828 4181 65527 i * i96.61.234.0/24 x.x.x.x 0 100 0 6130 2828 4181 65527 i *> y.y.y.y 0 6130 2828 4181 65527 i *> 148.207.2.0/24 y.y.y.y 0 6130 2828 3257 16531 13579 65090 i * i x.x.x.x 0 100 0 6130 2828 3257 16531 13579 65090 i *> 148.207.40.0/24 y.y.y.y 0 6130 2828 3257 16531 13579 65090 i * i x.x.x.x 0 100 0 6130 2828 3257 16531 13579 65090 i *> 148.207.97.0/24 y.y.y.y 0 6130 2828 3257 16531 13579 65090 i * i x.x.x.x 0 100 0 6130 2828 3257 16531 13579 65090 i * 170.34.100.0/24 y.y.y.y 0 6130 19151 20115 65011 ? * 170.34.104.0/24 y.y.y.y 0 6130 19151 20115 65011 ? * 170.34.113.0/24 y.y.y.y 0 6130 19151 20115 65011 ? * i174.35.1.0/24 x.x.x.x 0 100 0 6130 16467 64565 i * i174.47.199.0/24 x.x.x.x 0 100 0 6130 2828 4323 15065 65123 i *> y.y.y.y 0 6130 2828 4323 15065 65123 i * i192.109.61.0 x.x.x.x 0 100 0 6130 19151 20115 65011 i *> y.y.y.y 0 6130 19151 20115 65011 i *> 196.216.249.0 y.y.y.y 0 6130 2828 3257 8513 8513 8513 36881 65000 36896 37062 i * i x.x.x.x 0 100 0 6130 2828 3257 8513 8513 8513 36881 65000 36896 37062 i Network Next Hop Metric LocPrf Weight Path *> 209.172.69.128/30 y.y.y.y 0 6130 16467 64565 i * i x.x.x.x 0 100 0 6130 16467 64565 i *> 213.146.161.0 y.y.y.y 0 6130 2828 174 64679 48493 i * i x.x.x.x 0 100 0 6130 2828 174 64679 48493 i Thomas Magill Network Engineer Office: (858) 909-3777 Cell: (858) 869-9685 mailto:tmagill@providecommerce.com <mailto:tmagill@providecommerce.com> provide-commerce 4840 Eastgate Mall San Diego, CA 92121 ProFlowers <http://www.proflowers.com/> | redENVELOPE <http://www.redenvelope.com/> | Cherry Moon Farms <http://www.cherrymoonfarms.com/> | Shari's Berries <http://www.berries.com/>

3 2

Network topology
by Colin Alston 15 Nov '13

15 Nov '13

Hi all I'm considering trying to come up with some means to automatically detect a networks topology and draw pretty pictures. This is somewhat boring though if a network isn't well arranged with VLANs and q-tag trunk routers and so on (It will just look like a big cloud of junk connected off an assumed switch). Is there any kind of cunning trick to detect standard layer2 switches along a path without stuff like STP?

9 12

NFSen plugin - ddd
by Andrew Jones 29 Oct '13

29 Oct '13

Hi All, Does anyone have a copy of the DDoS detection plugin for NFSen called ddd that they could send to me? According to a blog article [1] I read, it used to be available at [2]. It's not there, and I haven't had any luck trying to track it down the usual ways. If anyone is able to provide a copy, I'd appreciate it. Thanks, Jonesy [1] http://www.ccieflyer.com/2010-01-JasonRowley.php [2] http://www.synacknetworks.com/ddd/ddd.zip

3 3

Inventory and workflow management systems
by vijay gill 26 May '13

26 May '13

What software solution do people use for inventory management for things like riser/conduit drawdown, fiber inventory, physical topology store, CLR/DLR, x-connect, contracts, port inventory, etc. Any experiences in integrating workflow into those packages for work orders, modeling, drawdown levels, etc. /vijay

10 13

Quad-A records in Network Solutions ?
by Carlos Martinez-Cagnazzo 23 Apr '13

23 Apr '13

Hello all, I just received a heads-up from a friend telling me that Network Solutions is unable/unwilling to configure AAAA's for .com/.net domains. He works for a large media outlet who will be enabling IPv6 on their sites for World IPv6 Launch Day. I hope it's just a misunderstanding. If it's not, I would love to know if there is a reason for this, and if they have a timeline for supporting AAAA's. It's ok to contact me privately. regards Carlos

29 42

Re: switch 10G standalone TOR, core to DC
by Piotr 20 Feb '13

20 Feb '13

W dniu 2013-01-30 12:59, Ingo Flaschberger pisze: > Am 30.01.2013 11:30, schrieb Piotr: >> 2. >> Hp 5900 af 48xg >> large buffer options - configurable buffers >> gpl 30k$ > small: Memory and processor > 512 MB flash, 2 GB SDRAM; packet buffer size: 9 MB > > http://h17007.www1.hp.com/us/en/products/switches/HP_5900_Switch_Series/ind… > Tab models > small in 5900 series: High-performance 10 GbE switching — cut-through and nonblocking architecture delivers industry-leading low latency (~1 microsecond) and very demanding enterprise applications; the switch delivers a 1.28 Tbps switching capacity and 952.32 Mpps packet forwarding rate in addition to incorporating 9 MB of packet buffers or big in 5920: High-performance 10GbE switching — enables you to scale your server-edge 10GbE ToR deployments with 24 high-density 10GbE ports delivered in a 1RU design; delivers a 480 Gbps (357.12 Mpps) switching capacity in addition to incorporating 3.6 GB of packet buffers Ultra-deep packet buffering — provides up to a 3.6 GB packet buffer to reduce network congestion at the I/O that is associated with the heavy use of server virtualization, as well as bursty multimedia, storage applications, and other critical services http://h17007.www1.hp.com/us/en/products/switches/HP_5920_Switch_Series/ind…

7 7

Muni network ownership and the Fourth
by Jay Ashworth 16 Feb '13

16 Feb '13

----- Original Message ----- > From: "Rob McEwen" <rob(a)invaluement.com> > (C) The fact that the Internet is a series of PRIVATE networks... NOT > owned/operated by the Feds... is a large reason why the 4th amendment > provides such protections... it becomes somewhat of a "firewall" of > protection against Federal gov't trampling of civil liberties... but > if they own the network, then that opens up many doors for them. Regular readers know that I'm really big on municipally owned fiber networks (at layer 1 or 2)... but I'm also a big constitutionalist (on the first, second, fourth, and fifth, particularly), and this is the first really good counter-argument I've seen, and it honestly hadn't occurred to me. Rob, anyone, does anyone know if any 4th amendment case law exists on muni- owned networks? Cheers, -- jra -- Jay R. Ashworth Baylink jra(a)baylink.com Designer The Things I Think RFC 2100 Ashworth & Associates http://baylink.pitas.com 2000 Land Rover DII St Petersburg FL USA #natog +1 727 647 1274

46 292