March 2010 - Test - lists.nanog.org

Blocking private AS
by Thomas Magill 27 Nov '13

27 Nov '13

I am thinking about implementing a filter to block all traffic with private AS numbers in the path. I see quite a few in my table though so I am concerned I might block some legitimate traffic. In some cases, these are just prefixes with the private appended to the end but a few have the private as a transit. Is this a good idea or would I likely be blocking too much legitimate traffic? The filter I am using currently shows the following: BGP table version is 5462394, local router ID is 209.112.253.4 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path * i58.68.109.0/24 x.x.x.x 0 100 0 6130 9498 10201 65534 i *> y.y.y.y 0 6130 9498 10201 65534 i * i68.115.224.0/24 x.x.x.x 0 100 0 6130 19151 20115 65011 i *> y.y.y.y 0 6130 19151 20115 65011 i * 85.112.22.0/24 y.y.y.y 0 6130 6939 23148 64532 64532 64532 64532 64532 64532 64532 64532 64532 i *> 93.189.194.0/24 y.y.y.y 0 6130 3549 39386 39386 39386 25233 65000 47146 i * i x.x.x.x 0 100 0 6130 3549 39386 39386 39386 25233 65000 47146 i *> 96.60.243.0/24 y.y.y.y 0 6130 2828 4181 65528 i * i x.x.x.x 0 100 0 6130 2828 4181 65528 i * i96.61.232.0/24 x.x.x.x 0 100 0 6130 2828 4181 65527 i *> y.y.y.y 0 6130 2828 4181 65527 i * i96.61.233.0/24 x.x.x.x 0 100 0 6130 2828 4181 65527 i *> y.y.y.y 0 6130 2828 4181 65527 i * i96.61.234.0/24 x.x.x.x 0 100 0 6130 2828 4181 65527 i *> y.y.y.y 0 6130 2828 4181 65527 i *> 148.207.2.0/24 y.y.y.y 0 6130 2828 3257 16531 13579 65090 i * i x.x.x.x 0 100 0 6130 2828 3257 16531 13579 65090 i *> 148.207.40.0/24 y.y.y.y 0 6130 2828 3257 16531 13579 65090 i * i x.x.x.x 0 100 0 6130 2828 3257 16531 13579 65090 i *> 148.207.97.0/24 y.y.y.y 0 6130 2828 3257 16531 13579 65090 i * i x.x.x.x 0 100 0 6130 2828 3257 16531 13579 65090 i * 170.34.100.0/24 y.y.y.y 0 6130 19151 20115 65011 ? * 170.34.104.0/24 y.y.y.y 0 6130 19151 20115 65011 ? * 170.34.113.0/24 y.y.y.y 0 6130 19151 20115 65011 ? * i174.35.1.0/24 x.x.x.x 0 100 0 6130 16467 64565 i * i174.47.199.0/24 x.x.x.x 0 100 0 6130 2828 4323 15065 65123 i *> y.y.y.y 0 6130 2828 4323 15065 65123 i * i192.109.61.0 x.x.x.x 0 100 0 6130 19151 20115 65011 i *> y.y.y.y 0 6130 19151 20115 65011 i *> 196.216.249.0 y.y.y.y 0 6130 2828 3257 8513 8513 8513 36881 65000 36896 37062 i * i x.x.x.x 0 100 0 6130 2828 3257 8513 8513 8513 36881 65000 36896 37062 i Network Next Hop Metric LocPrf Weight Path *> 209.172.69.128/30 y.y.y.y 0 6130 16467 64565 i * i x.x.x.x 0 100 0 6130 16467 64565 i *> 213.146.161.0 y.y.y.y 0 6130 2828 174 64679 48493 i * i x.x.x.x 0 100 0 6130 2828 174 64679 48493 i Thomas Magill Network Engineer Office: (858) 909-3777 Cell: (858) 869-9685 mailto:tmagill@providecommerce.com <mailto:tmagill@providecommerce.com> provide-commerce 4840 Eastgate Mall San Diego, CA 92121 ProFlowers <http://www.proflowers.com/> | redENVELOPE <http://www.redenvelope.com/> | Cherry Moon Farms <http://www.cherrymoonfarms.com/> | Shari's Berries <http://www.berries.com/>

3 2

Network topology
by Colin Alston 15 Nov '13

15 Nov '13

Hi all I'm considering trying to come up with some means to automatically detect a networks topology and draw pretty pictures. This is somewhat boring though if a network isn't well arranged with VLANs and q-tag trunk routers and so on (It will just look like a big cloud of junk connected off an assumed switch). Is there any kind of cunning trick to detect standard layer2 switches along a path without stuff like STP?

9 12

Inventory and workflow management systems
by vijay gill 26 May '13

26 May '13

What software solution do people use for inventory management for things like riser/conduit drawdown, fiber inventory, physical topology store, CLR/DLR, x-connect, contracts, port inventory, etc. Any experiences in integrating workflow into those packages for work orders, modeling, drawdown levels, etc. /vijay

10 13

ISP port blocking practice
by Zhiyun Qian 13 Sep '10

13 Sep '10

Hi all, What is the common practice for enforcing port blocking policy (or what is the common practice for you and your ISP)? More specifically, when ISPs try to block certain outgoing port (port 25 for instance), they could do two rules: 1). For any outgoing traffic, if the destination port is 25, then drop the packets. 2). For any incoming traffic, if the source port is 25, then drop the packets. Note that either of the rule would be able to block outgoing port 25 traffic since each rule essentially represent one direction in a TCP flow. Of course, they could apply both rules. However, based on our measurement study, it looks like most of the ISPs are only using rule 1). Is there any particular reason why rule 1) instead of rule 2)? Or maybe both? Also, is it common that the rules are based on tcp flags (e.g. SYN, SYN-ACK)? One would think block SYN packet is good enough. Regards. -Zhiyun

52 121

Re: [mailop] Virbl: The First IPv6 enabled dnsbl?
by Tammy A. Wisdom 29 Jun '10

29 Jun '10

----- "Mark Schouten" <marks(a)bit.nl> wrote: > Hi, > > FYI: > > http://virbl.bit.nl/index.php#ipv6 > > Comments on the listing method are appreciated. > > Regards, > wow bind? thats gonna get slower and slower and slower. I hope you have a TON of ram for that box. for example if we loaded the current contents of the ahbl from rbldnsd to bind it would take up a TON of ram. bind would take forever to load and and would be screaming for its dear life. --Tammy Tammy A Wisdom The Summit Open Source Development Group http://www.sosdg.org / http://www.ahbl.org ****************************************************************************** Disclaimer: This e-mail may contain trade secrets or privileged, undisclosed or otherwise confidential information. If you have received this e-mail in error, you are hereby notified that any review, copying or distribution of it is strictly prohibited. Please inform us immediately and destroy the original transmittal. Thank you for your cooperation. ******************************************************************************

3 2

Upstream BGP community support
by Andy B. 04 Jun '10

04 Jun '10

Hi, Quick question: Would you buy transit from someone who does not support BGP communities? Here is the story: My company is pushing several GBit/s through various upstream providers. We have reached the point where we rely on BGP communitiy support, especially communities that can be sent to the upstream to change the way he announces our prefixes to his peers/transits. While most decent upstream providers support this kind of traffic engineering, one of them refuses to send and accept BGP communities. I tried to contact my upstream several times through different channels to get some background as to why they would not be able to provide us this service, but all we get is tickets that get closed without an answer. Management itself does not seem to bother either. Is this normal or is it too much to ask for BGP communities from an upstream who has points of presence in the US, Europe and Asia? Andy

27 58

[NANOG-announce] NANOG 49 Call for Presentations now available
by David Meyer 05 May '10

05 May '10

Folks, After a great meeting in Austin, we're gearing up for NANOG 49. The NANOG 49 CFP is now available on http://www.nanog.org/meetings/nanog49/callforpresent.php Important dates include: Presentation Abstracts and Draft Slides Due: 09-Apr-2010 Final Slides Due: 07-May-2010 Draft Program Published: 13-May-2010 Final Agenda Published: 27-May-2010 Please submit your materials to http://pc.nanog.org Looking forward to seeing everyone in San Francisco. Dave (for the NANOG PC) _______________________________________________ NANOG-announce mailing list NANOG-announce(a)nanog.org http://mailman.nanog.org/mailman/listinfo/nanog-announce

2 1

Re: OT: old farts recollecting -- Re: ASR1002
by gordon b slater 18 Apr '10

18 Apr '10

On Tue, 2010-01-19 at 17:42 -0800, Bill Stewart wrote: > Could the comment actually have been about pay telephones, which were > once common in cities? > Good point Bill, which, if so, would place the comment at or about the start of the cellfone introduction. @Jim, maybe it's more a telco/2600 thing? None of my overnite greps through old saved chats/snippets came up with anything remotely like it, sadly. I tried a few gopher/archie searches but the system is in very poor shape these days, a shadow of it's early 90's usefulness. Maybe it was on Fidonet or similar? Anyone else have any input? Please ask your old folks ;) Gord

10 10

ASR1002
by Kenny Sallee 17 Apr '10

17 Apr '10

Anyone have recommendations on solid IOS XE code for ASR 1002 that's just doing: - BGP - VRF's - Many sub-interfaces and ACL's It shipped with 02.04.02.122-33.XND2.bin Thanks, Kenny

11 13

Finding content in your job title
by Steve Bertrand 08 Apr '10

08 Apr '10

Hi all, This is perhaps a rather silly question, but one that I'd like to have answered. I'm young in the game, and over the years I've imagined numerous job titles that should go on my business card. They went from cool, to high-priority, to plain unimaginable. Now, after 10 years, I reflect back on what I've done, and what I do now. To me, if a business is loose-knit with no clear job descriptions or titles (ie. too small to have CXO etc), I feel that a business card should reflect what one feels is the primary job responsibility, or what they do the most (or love the most). For instance, I like to present myself as a 'network engineer'. I have never taken formal education, don't hold any certifications (well, since 2001), and can't necessarily prove my worth. How does the ops community feel about using this designation? Is it intrusive or offensive to those who hold real engineering degrees? I'm content with 'network manager', given that I still do perform (in my sleep) numerous system tasks and have to sometimes deal with front-line helpdesk stuff. Instead of acting like I'm trying to sell myself out, I'll leave out what I actually do and ask those who sig themselves with 'network engineer' what they do day-to-day to acquire that title, and if they feel comfortable with having it. Steve

37 56