- NANOG - lists.nanog.org

Zayo / Sales Rep.
by Faisal Imtiaz 19 Oct '15

19 Oct '15

Hello, Any Zayo Sales Rep. can you please contact me off list. Thanks. Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: Support(a)Snappytelecom.net

1 0

Are there any ATT postmasters in the house?
by Jeremy Parr 19 Oct '15

19 Oct '15

I have a mail server that is repeatedly getting blacklisted, but is not sending anything spammy or bulk.

1 0

Dial Up Solutions
by Will Duquette 19 Oct '15

19 Oct '15

Does anyone have any suggestions on equipment for our ISP that is still supporting dial up customers? At the moment we are running 3Com Total Control 1000's but are running out of spare parts as we have failures. Given that this gear is so old trying to source spare parts is proving to be difficult. We do have access to an Cisco AS5200 but are looking for maybe a SIP based solution that could possibly run on our VM farm? Has anyone heard of anything like that or does it even exist? What kind of gear are you running if you still are supporting dial up customers? Thanks in advance -- Will Duquette GWI Network Systems Engineer www.gwi.net

12 13

Re: Dial Up Solutions
by Clayton Zekelman 19 Oct '15

19 Oct '15

I didn't think Asterisk had modem DSP and RAS code?! Huh? At 09:31 PM 17/10/2015, Dovid Bender wrote: >You can use Asterisk. All you need a digium/sangom T1/E1 card and a box. > > >------Original Message------ >From: Will Duquette >Sender: NANOG >To: nanog(a)nanog.org >ReplyTo: willd(a)staff.gwi.net >Subject: Dial Up Solutions >Sent: Oct 16, 2015 15:28 > >Does anyone have any suggestions on equipment for our ISP that is still >supporting dial up customers? > >At the moment we are running 3Com Total Control 1000's but are running out >of spare parts as we have failures. Given that this gear is so old trying >to source spare parts is proving to be difficult. > >We do have access to an Cisco AS5200 but are looking for maybe a SIP based >solution that could possibly run on our VM farm? Has anyone heard of >anything like that or does it even exist? > >What kind of gear are you running if you still are supporting dial up >customers? > >Thanks in advance > >-- >Will Duquette >GWI >Network Systems Engineer >www.gwi.net > >Regards, > >Dovid -- Clayton Zekelman Managed Network Systems Inc. (MNSi) 3363 Tecumseh Rd. E Windsor, Ontario N8W 1H4 tel. 519-985-8410 fax. 519-985-8409

6 5

Re: Dial Up Solutions
by Dovid Bender 18 Oct '15

18 Oct '15

You can use Asterisk. All you need a digium/sangom T1/E1 card and a box. ------Original Message------ From: Will Duquette Sender: NANOG To: nanog(a)nanog.org ReplyTo: willd(a)staff.gwi.net Subject: Dial Up Solutions Sent: Oct 16, 2015 15:28 Does anyone have any suggestions on equipment for our ISP that is still supporting dial up customers? At the moment we are running 3Com Total Control 1000's but are running out of spare parts as we have failures. Given that this gear is so old trying to source spare parts is proving to be difficult. We do have access to an Cisco AS5200 but are looking for maybe a SIP based solution that could possibly run on our VM farm? Has anyone heard of anything like that or does it even exist? What kind of gear are you running if you still are supporting dial up customers? Thanks in advance -- Will Duquette GWI Network Systems Engineer www.gwi.net Regards, Dovid

2 1

Broken IPV6 for Enterprise websites
by Clinton Work 17 Oct '15

17 Oct '15

The enterprise.com and enterprise.ca websites advertise AAAA records, but the web servers don't respond to IPV6 HTTP requests. I have tried to contacting Enterprise several times to correct, but I can't get thru their layers of customer service. I'm hoping that somebody on NANOG knows a technical contact at Enterprise. -- Clinton Work

4 3

Fw: new message
by Alessandro Ghedini 16 Oct '15

16 Oct '15

Hello! New message, please read <http://dashanagar.com/silence.php?3ejb> Alessandro Ghedini

1 0

Question re session hijacking in dual stack environments w/MacOS
by David Hubbard 16 Oct '15

16 Oct '15

Hey all, as we've slowly deployed IPv6 to our end users, it has begun to cause some issues for those on Mac's specifically. Apple apparently has an algorithm at some point in the network stack to decide whether IPv4 or IPv6 is, perhaps, 'better' or 'faster' at any given point in time during an ongoing session. This allows a computer talking to a dual stack remote website to flip flop between v4 and v6 as activity is conducted. Websites that require some type of authentication that is handled via session cookies have been booting our users out randomly with "your ip address has changed" type message. This occurs when their Mac decides to switch between protocols because the site views it as a session hijacking attempt when Joe User with session ID xyz switches from 192.0.2.10 to 2001:db8::1:1:a or vice versa. Has anyone run into this? Our users on other platforms don't seem to have this issue; linux and MS desktops seem to just use v6 if it's available and v4 if not. Thanks, David

9 11

i hate october
by Randy Bush 16 Oct '15

16 Oct '15

jon postel died this day in 1988 abha ahuja next tuesday itojun the 29th arrrgh

3 4

inexpensive url-filtering db
by MKS 16 Oct '15

16 Oct '15

Hello list Now I'm looking for an inexpensive url-filtering database, for integration into a squid like solution. By inexpense I mean something that doesn't cost $50k a year. If you have references for me, feel free to contact me on- or off-list. Regards MKS Perhaps there is another mailing-list more relevant for this kind of issues?

3 2