- NANOG - lists.nanog.org

Looking for a Comcast engineer
by Chris Lane 07 Dec '16

07 Dec '16

If a Comcast engineer is available mind hitting me up offline. I am not a customer, but a former customer of mine is still advertising my IP /24 out to you Comcast. the prefix belongs to our company and the former customer won't return my calls. I'd like you to remove prefix from filters. Much regards, Chris

1 1

Favorite Speed Test Systems
by Graham Johnston 07 Dec '16

07 Dec '16

For many years we have had a local instance of the Ookla speedtest.net on our network, and while it is pretty good some other tests seem include more detailed results. I am aware of the following speedtest systems that an operator can likely have a local instance of: * Speedtest.net * Sourceforge.net/speedtest * Dslreports.com/speedtest Are there others? What is your preferred one and why? Thanks, Graham

17 21

Canadian National Railway contact
by Andy Ringsmuth 06 Dec '16

06 Dec '16

If there happens to be someone here from the Canadian National Railway, or if someone knows someone there, could you hit me up off-list? Attempting to work through an e-mail block from us to them that I’ve been unsuccessful remedying so far. Much appreciated! ---- Andy Ringsmuth andy(a)newslink.com News Link – Manager Travel, Technology & Facilities 2201 Winthrop Rd., Lincoln, NE 68502-4158 (402) 475-6397 (402) 304-0083 cellular

2 1

Level3 / Cogent / NetFlix BGP Assistance
by Sam Norris 06 Dec '16

06 Dec '16

Hey all, In early October our traffic levels from NetFlix went from about half Level3 and half Cogent - pretty well balanced - to all on Level3. Standard multihomed BGP setup with minimal TE if I can help it. I am starting to run into problems with a full gigabit port on Level3 and only 100-200mbps on Cogent at that colo. I tried padding, I even tried 65000:2906 bgp community, but it seems like if our level3 port is up NetFlix chooses it solely. How can I load balance NetFlix traffic across my two ports so that I am not paying for overages and/or forced to up to a 10G port immediately? I have 3 other providers at that colo and cannot find any mix of bgp tricks to get some of it thru our other providers. I notice AS2906 has a localpref of 86 - odd ... The 108.175.47.0/24 block seems to be using as 2906 so I thought a 65000:2906 wouldn't announce those prefixes to them at all. I have about 10 prefixes being announced so I could implement a no-export on some of them to load balance but that doesn't work. Thx, Sam BGP routing table entry for 108.175.47.0/24 Paths: (2 available, best #1) 2906 AS-path translation: { 108.175.47.0/24 } ear3.LosAngeles1 (metric 100000) Origin IGP, metric 30334, localpref 86, valid, internal, best Community: 2906:51081 North_America Lclprf_86 United_States Level3_Peer Los_Angeles Level3:10984 Originator: ear3.LosAngeles1 2906 AS-path translation: { 108.175.47.0/24 } ear3.LosAngeles1 (metric 100000) Origin IGP, metric 30334, localpref 86, valid, internal Community: 2906:51081 North_America Lclprf_86 United_States Level3_Peer Los_Angeles Level3:10984 Originator: ear3.LosAngeles1

4 3

Need contact info for AS1798 - State of Oregon
by Tyler Applebaum 05 Dec '16

05 Dec '16

If you could contact me off-list, I'd appreciate it. - Tyler

1 0

Acquiring unused IP range. Some questions
by William McLendon 05 Dec '16

05 Dec '16

Hi everyone, we are about to acquire a block of IP’s from another organization that has unused space, and being fairly new to these procedures, I was hoping for some guidance. We have already been pre-approved by ARIN for the block size we are acquiring, and finalizing the deal with the current owner of the address space. First question is, once they initiate the transfer request to transfer the IP range to us, how long does that typically take for ARIN to complete? Secondly, our relationship with the IP block owner is a very good one, such that I think they would be ok with us advertising this block before we technically own it. My question is, what do they and we need to do to accomplish that in the proper way, so that the internet at large would accept the advertisement from a different ASN, and not view as some sort of hijacking, etc. I am guessing they may need to update some RADB or something like that, but i’ll be honest my knowledge of how those things work and their complete function is pretty slim. This would be a short term thing as we expect the purchase process to complete pretty quickly, but it would be advantageous to us to be able to advertise the space immediately. We just want to make sure we start off on the right foot. Thanks, Will

4 3

Wormly SMTP Test Message
by Wormly SMTP Test 04 Dec '16

04 Dec '16

This message was sent using the Wormly SMTP testing tool by this user: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/54.0.2840.99 Safari/537.36 197.230.17.94

1 0

Wormly SMTP Test Message
by Wormly SMTP Test 04 Dec '16

04 Dec '16

This message was sent using the Wormly SMTP testing tool by this user: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/54.0.2840.99 Safari/537.36 197.230.17.94

1 0

Wormly SMTP Test Message
by Wormly SMTP Test 04 Dec '16

04 Dec '16

This message was sent using the Wormly SMTP testing tool by this user: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/54.0.2840.99 Safari/537.36 105.159.251.206

1 0

Wormly SMTP Test Message
by Wormly SMTP Test 04 Dec '16

04 Dec '16

This message was sent using the Wormly SMTP testing tool by this user: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/54.0.2840.99 Safari/537.36 197.230.17.94

1 0