- NANOG - lists.nanog.org

Stratacom BPX 8600 and New Beetle?!?
by Zachary McGibbon 09 Oct '98

09 Oct '98

Well... We tried the ultimate test today. I drove about 140km with a Stratacom BPX 8600 and power supply in the trunk of my 1998 New Beetle (with the back seat folded down). It was a bit hard to get it, but once in it fit quite nicely and didn't move around since it was so heavy. Now all I have to do is try a 7513... Pictures are available at: http://www.northco.net/~mzac/stratacom/ They're a bit dark, but you can see it... Zachary McGibbon Network Management Specialist UUNET WorldCom mzac(a)uunet.ca http://www.uunet.ca/ Phone: (514)875-0010, Fax: (514)875-5735

6 7

NANOG 14 Hotel
by Pam Ciesla 09 Oct '98

09 Oct '98

Is sold out. Alternate hotels are: Fairfield Inn-Downtown 175 Piedmont Ave. N.E. 404-688-6518 Residence Inn by Marriott Downtown 134 Peachtree St. 404-522-0950 Both within walking distance (4 blocks). Limited number of rooms available. Both can be reached by 800-228-9290 ---------------------------------------------------------------------- Pam Ciesla 734-936-0172 - phone Merit Network, Inc. 734-647-3185 - fax University of Michigan 4251 Plymouth Road Bldg. I, Suite C Ann Arbor, MI 48105-2785 -----------------------------------------------------------------------

1 0

Re: Did the west coast slide into the sea?
by Sean Donelan 09 Oct '98

09 Oct '98

Did I mention its a good idea to keep the direct-dial (non-800) numbers for your vendors around? Oh, ok. I thought I had. Cisco: 1-800-553-2447; 1-800-553-6387; +1 (408) 526-7209 I don't know if the 408 number does the around the world routing like the 1-800 number, or if you need to call the Aussie, Belgie, et al numbers directly. ObRouterCommand: Ok so you can't type that into your Cisco router, but if you call the number, they can tell you something to type into it. Two weeks to go before CCIE lab, and I still am pulling my hair out. How do you configure PUP? markh(a)repairnet.COM (Mark Hernandez) writes: >> Man, everything transiting the west coast seems completely foo bar'd >> this afternoon. What's up? > >Not only that, but 800 service is down between Central >California and Bay Area...probably elsewhere, no doubt. > >We discovered this little fact trying to call Cisco for some >service info in the last hour. <g> > >Several others (including our own) are showing as down, but >regular (non-800) seems to work. -- Sean Donelan, Data Research Associates, Inc, St. Louis, MO Affiliation given for identification not representation

1 0

Re: solid 300bps
by John M. Brown 09 Oct '98

09 Oct '98

Still have one connected to my running Z-80 based S-100 bus Vector Graphics CP/M machine! Great units jmbrown At 02:12 AM 10/8/98 -0400, Lon R. Stockton, Jr. wrote: > >On Wed, 7 Oct 1998, Roeland M.J. Meyer wrote: > >> I'll ROTFALMAO if I hear someone trying an InterNet connection at 300 baud. > >Been there, done that whilst testing dialup equipment. > >Novation CAT 300 bps accoustic coupler (anybody remember 'em?). Reliable >300bps connections every time. > >Was much less painful testing with a Hayes SmartModem 1200. > >I really miss the fast handshakes and no-bullshit connection speeds. >*grin* > >[note for randy: I dunno how to config a cisco for this, but with >3com HDSPs, ya go to the console or management s/w and set 'enable >300 bps' and/or 'enable 1200 bps' appropriately.] >

2 1

Re: Discussion point: Telco quality?
by dharvey＠dataplace.net 09 Oct '98

09 Oct '98

Maybe the answer is the customers (us) demanding retrobution for poor quality service. I don't know what you would call it, but for lack of a better term, an SLA on turnups... Just a thought... Drake Harvey Manager, Internet Technologies The Data Place, Inc., an IXC Company

1 0

Re: Update on fiber cut
by Jim S. Bernhardt 09 Oct '98

09 Oct '98

> There are technicals on site now. Patches are being installed, and >cable prep is occurring..... It looks like some progress is being made. One of our circuits that was part of the fiber cut, is back up and running. Jim S. Bernhardt Backbone Network Manager MediaOne jbernhardt(a)mediaone.com jimsb(a)delphi.com V: 978-459-4700 x5756

1 0

pacbell nap
by andrew khoo 09 Oct '98

09 Oct '98

i need someone in pacbell to assist me in getting a connection to pacbell nap. email directly please. andrew khoo +1-415-902-8820 +61-416-161-234

1 0

MCI or Sprint NNI to GTE?
by Scott Michel 09 Oct '98

09 Oct '98

I've got an unique situation which I'm more than happy to elucidate via private e-mail which has me asking the question, "Does MCI or Sprint have an NNI to GTE's ATM cloud in So. Cal?" -scooter -- Scott Michel scottm(a)aero.org Member of Technical Staff, CSRD 310/336-5034 The Aerospace Corporation

2 1

Update on fiber cut
by Richard Irving 09 Oct '98

09 Oct '98

WC recently showed me the error of my ways. :( The IXC, was, and is, "IXC", not "IXE". (Sorry, to both parties) (I should have known, I *know* IX"C"... good people) There are technicals on site now. Patches are being installed, and cable prep is occurring..... However, no promises yet.... My thanks to WC for the prompt update ! Possible affected regions: Dallas, Phoenix, El Paso, San Diego, LA. I am actually getting to *like* WC ... I *know* it's time to go home. Where is my hive... Er... :}

1 0

Did the west coast slide into the sea?
by Paul Ferguson 08 Oct '98

08 Oct '98

Man, everything transiting the west coast seems completely foo bar'd this afternoon. What's up? - paul

2 2