Re: "Programmers can't get IPv6 thus that is why they do not have IPv6 in their applications"....
Comcast removed the "no IPv6" excuse? That removal somehow skipped my house in Washington DC where they installed (last October) a router which does not even support it (an Arrus voice gateway- the one where you can't turn of the crummy 2.4g wireless radio) and none of the folks I've spoken to on the phone can tell me when or if it will be coming. I look forward to Comcast giving me native v6 at home. David Barak
In message <1359591223.5270.YahooMailMobile@web31809.mail.mud.yahoo.com>, David Barak writes:
Comcast removed the "no IPv6" excuse? That removal somehow skipped my house in Washington DC where they installed (last October) a router which does not even support it (an Arrus voice gateway- the one where you can't turn of the crummy 2.4g wireless radio) and none of the folks I've spoken to on t he phone can tell me when or if it will be coming.
I look forward to Comcast giving me native v6 at home.
David Barak
Firstly fix your mail client. What's this "'" garbage in text/plain? Deployment Update Published on Tuesday, October 23, 2012 IPv6 has been launched on all Arris DOCSIS 3.0 C4 CMTSes, covering over 50% our network. We are targeting completion of the rest of the network by mid-2013. Our progress has led to nearly 2.5% of our Xfinity Internet customers actively using native dual stack. Additionally, IPv6 traffic has increased 375% since World IPv6 Day in June 2011. Following World IPv6 Launch in June 2012 Comcast also observed that approximately 6% of the 2012 Olympics served over YouTube to Comcast customers was over IPv6. http://www.comcast6.net -- Mark Andrews, ISC 1 Seymour St., Dundas Valley, NSW 2117, Australia PHONE: +61 2 9871 4742 INTERNET: marka@isc.org
On Jan 30, 2013, at 7:52 PM, Mark Andrews <marka@isc.org> wrote:
Firstly fix your mail client. What's this "'" garbage in text/plain?
That's yahoo web mail on an iPhone, sorry.
Deployment Update
Published on Tuesday, October 23, 2012
IPv6 has been launched on all Arris DOCSIS 3.0 C4 CMTSes, covering over 50% our network. We are targeting completion of the rest of the network by mid-2013. Our progress has led to nearly 2.5% of our Xfinity Internet customers actively using native dual stack. Additionally, IPv6 traffic has increased 375% since World IPv6 Day in June 2011. Following World IPv6 Launch in June 2012 Comcast also observed that approximately 6% of the 2012 Olympics served over YouTube to Comcast customers was over IPv6.
The update you sent is lovely, except I can tell you that the one (also an Arris, running DOCSIS 3.0) which was installed in late October in my house in Washington simply does not run v6 with the pre-installed load. Now, is there some firmware upgrade which could fix this? Maybe, but it sure would be nice if the folks who answer the phone in support could direct me to someone who has heard of this technology. So no, as I said before, Comcast has *not* removed the v6 barrier here. I'd like it to "just work", please. David Barak Sent from a mobile device, please forgive autocorrection.
On Wed, 30 Jan 2013, David Barak wrote:
On Jan 30, 2013, at 7:52 PM, Mark Andrews <marka@isc.org> wrote: The update you sent is lovely, except I can tell you that the one (also an Arris, running DOCSIS 3.0) which was installed in late October in my house in Washington simply does not run v6 with the pre-installed load. Now, is there some firmware upgrade which could fix this? Maybe, but it sure would be nice if the folks who answer the phone in support could direct me to someone who has heard of this technology. So no, as I said before, Comcast has *not* removed the v6 barrier here. I'd like it to "just work", please.
That was the case with the router that was provided with my FiOS service over the summer. It looks like it wasn't even a firmware issue, or a Verizon-specific formware load, unless Verizon turned on the 'enable IPv6' bit at some point. When I first got it, there was no IPv6 configuration on the router at all, nor was there an option to turn it on. When I checked a few weeks later, there was an IPv6 configuration section, but the router had not been rebooted during that time, and it is still running the same firmware as before - when no v6 config section showed up. jms
In message <8C10DED0-0980-4C76-8307-4F4F139D6594@yahoo.com>, David Barak writes :
On Jan 30, 2013, at 7:52 PM, Mark Andrews <marka@isc.org> wrote:
Firstly fix your mail client. What's this "'" garbage in text/plain?
That's yahoo web mail on an iPhone, sorry.
Deployment Update
Published on Tuesday, October 23, 2012
IPv6 has been launched on all Arris DOCSIS 3.0 C4 CMTSes, covering over 50% our network. We are targeting completion of the rest of the network by mid-2013. Our progress has led to nearly 2.5% of our Xfinity Internet customers actively using native dual stack. Additionally, IPv6 traffic has increased 375% since World IPv6 Day in June 2011. Following World IPv6 Launch in June 2012 Comcast also observed that approximately 6% of the 2012 Olympics served over YouTube to Comcast customers was over IPv6.
The update you sent is lovely, except I can tell you that the one (also an Arris, running DOCSIS 3.0) which was installed in late October in my house in Washington simply does not run v6 with the pre-installed load. Now, is there some firmware upgrade which could fix this? Maybe, but it sure would be nice if the folks who answer the phone in support could direct me to someone who has heard of this technology. So no, as I said before, Comcast has *not* removed the v6 barrier here. I'd like it to "just work", please.
Looking at http://mydeviceinfo.comcast.net you get a choice of wireless or IPv6 in Arris.
David Barak
Sent from a mobile device, please forgive autocorrection.
-- Mark Andrews, ISC 1 Seymour St., Dundas Valley, NSW 2117, Australia PHONE: +61 2 9871 4742 INTERNET: marka@isc.org
Looking at http://mydeviceinfo.comcast.net you get a choice of wireless or IPv6 in Arris.
I Wish they would ask which you want before install: I already have better wireless, and the Arris ones don't let you disable theirs :/ Thank you for the pointer - perhaps a swap is in order. David Barak Sent from a mobile device, please forgive autocorrection.
On 1/30/2013 9:10 PM, David Barak wrote:
IPv6 has been launched on all Arris DOCSIS 3.0 C4 CMTSes, covering over 50% our network.
The update you sent is lovely, except I can tell you that the one (also an Arris, running DOCSIS 3.0) which was installed in late October in my house in Washington simply does not run v6 with the pre-installed load. In this particular case "C4 CMTSes" is the important bit of that update. The CMTS is what your modem connects to on the other end. You might be connected to a different type of CMTS which doesn't support or isn't configured for IPv6. You wouldn't be able to know that without contacting someone with a good knowledge of the network at Comcast though.
It could be as you say, that the modem only supports it when wireless is disabled and that is the only thing stopping it from working for you. If that was the case I would ask for a different modem, or go buy a modem that you think will work.
On Wed, 30 Jan 2013, David Barak wrote:
Comcast removed the "no IPv6" excuse? That removal somehow skipped my house in Washington DC where they installed (last October) a router which does not even support it (an Arrus voice gateway- the one where you can't turn of the crummy 2.4g wireless radio) and none of the folks I've spoken to on the phone can tell me when or if it will be coming.
I know Verizon is rolling out v6 in some areas of their FiOS footprint. The router they provided supports it, but what I got from their customer service people was that they ran into some sort of issue with their TV set-top boxes working properly with IPv6 or at least in a dual-stack environment. At least that's where things stand in Pittsburgh. I don't think they've provided training to their customer service people on IPv6 yet. The rep I spoke with a few weeks ago told me I was the first customer that has asked her about it. Looking forward to native v6 / dual-stack here... jms
----- Original Message -----
From: "Justin M. Streiner" <streiner@cluebyfour.org>
I know Verizon is rolling out v6 in some areas of their FiOS footprint. The router they provided supports it, but what I got from their customer service people was that they ran into some sort of issue with their TV set-top boxes working properly with IPv6 or at least in a dual-stack environment. At least that's where things stand in Pittsburgh.
VZF's ONTs can't even do *ARP* right, or at least they couldn't as of last March. We expect them to do v6? Cheers, -- jra -- Jay R. Ashworth Baylink jra@baylink.com Designer The Things I Think RFC 2100 Ashworth & Associates http://baylink.pitas.com 2000 Land Rover DII St Petersburg FL USA #natog +1 727 647 1274
On Wed, Jan 30, 2013 at 10:22:43PM -0500, Jay Ashworth wrote:
VZF's ONTs can't even do *ARP* right, or at least they couldn't as of last March. We expect them to do v6?
Perfect! We don't *need* ARP for v6!
participants (6)
-
David Barak
-
Jay Ashworth
-
John Osmon
-
Justin M. Streiner
-
Mark Andrews
-
Robert Drake