Hi, I have a Hurricane Electric v6 tunnel setup on an AWS (amazon web services) instance so that i can have ipv6 connectivity. I can ping and traceroute out of the tunnel fine, but am unable to access the tunnel from outside. For example, i am unable to traceroute to the tunnel address outside the tunnel address, even with the AWS instance firewall completely open. I would like to host a website accessible via IPv6, hence the tunnel setup. Is this possible? if so, what could i be doing wrong? Or is there a better was to go about this? Thanks, Grant
On Wed, Jun 13, 2012 at 11:29 PM, Grant Ridder <shortdudey123@gmail.com> wrote:
Hi,
I have a Hurricane Electric v6 tunnel setup on an AWS (amazon web services) instance so that i can have ipv6 connectivity. I can ping and traceroute out of the tunnel fine, but am unable to access the tunnel from outside. For example, i am unable to traceroute to the tunnel address outside the tunnel address, even with the AWS instance firewall completely open. I would like to host a website accessible via IPv6, hence the tunnel setup. Is this possible? if so, what could i be doing wrong? Or is there a better was to go about this?
google/bing/yahoo/webcrawler search result: <http://blog.iphoting.com/blog/2012/06/02/ipv6-on-amazon-aws-ec2>
Thanks, Grant
On Jun 13, 2012 8:29 PM, "Grant Ridder" <shortdudey123@gmail.com> wrote:
Hi,
I have a Hurricane Electric v6 tunnel setup on an AWS (amazon web
services)
instance so that i can have ipv6 connectivity. I can ping and traceroute out of the tunnel fine, but am unable to access the tunnel from outside. For example, i am unable to traceroute to the tunnel address outside the tunnel address, even with the AWS instance firewall completely open. I would like to host a website accessible via IPv6, hence the tunnel setup. Is this possible? if so, what could i be doing wrong? Or is there a better was to go about this?
Thanks, Grant
Sigh. Or you could take your business to the dozen or so cloud / vps providers that support ipv6. ... Softlayer and Arpnetworks come to mind. I have used both with a high level of sucess CB
Also: www.cloudflare.com (for free) Este mensaje ha sido enviado gracias al servicio BlackBerry de Movilnet -----Original Message----- From: Cameron Byrne <cb.list6@gmail.com> Date: Wed, 13 Jun 2012 21:10:06 To: Grant Ridder<shortdudey123@gmail.com> Cc: <nanog@nanog.org> Subject: Re: HE IPv6 tunnel inbound On Jun 13, 2012 8:29 PM, "Grant Ridder" <shortdudey123@gmail.com> wrote:
Hi,
I have a Hurricane Electric v6 tunnel setup on an AWS (amazon web
services)
instance so that i can have ipv6 connectivity. I can ping and traceroute out of the tunnel fine, but am unable to access the tunnel from outside. For example, i am unable to traceroute to the tunnel address outside the tunnel address, even with the AWS instance firewall completely open. I would like to host a website accessible via IPv6, hence the tunnel setup. Is this possible? if so, what could i be doing wrong? Or is there a better was to go about this?
Thanks, Grant
Sigh. Or you could take your business to the dozen or so cloud / vps providers that support ipv6. ... Softlayer and Arpnetworks come to mind. I have used both with a high level of sucess CB
On Thu, Jun 14, 2012 at 12:10 AM, Cameron Byrne <cb.list6@gmail.com> wrote:
On Jun 13, 2012 8:29 PM, "Grant Ridder" <shortdudey123@gmail.com> wrote:
Hi,
I have a Hurricane Electric v6 tunnel setup on an AWS (amazon web
services)
instance so that i can have ipv6 connectivity. I can ping and traceroute out of the tunnel fine, but am unable to access the tunnel from outside. For example, i am unable to traceroute to the tunnel address outside the tunnel address, even with the AWS instance firewall completely open. I would like to host a website accessible via IPv6, hence the tunnel setup. Is this possible? if so, what could i be doing wrong? Or is there a better was to go about this?
Thanks, Grant
Sigh.
Or you could take your business to the dozen or so cloud / vps providers that support ipv6. ... Softlayer and Arpnetworks come to mind. I have used both with a high level of sucess
CB
To add to that list, I highly suggest Linode. Amazing provider with the best customer service I've seen. -- Sadiq S O< ascii ribbon campaign - stop html mail - www.asciiribbon.org
On 6/13/12 9:10 PM, Cameron Byrne wrote:
On Jun 13, 2012 8:29 PM, "Grant Ridder" <shortdudey123@gmail.com> wrote:
Hi,
I have a Hurricane Electric v6 tunnel setup on an AWS (amazon web
services)
instance so that i can have ipv6 connectivity. I can ping and traceroute out of the tunnel fine, but am unable to access the tunnel from outside. For example, i am unable to traceroute to the tunnel address outside the tunnel address, even with the AWS instance firewall completely open. I would like to host a website accessible via IPv6, hence the tunnel setup. Is this possible? if so, what could i be doing wrong? Or is there a better was to go about this?
Thanks, Grant
Sigh.
Or you could take your business to the dozen or so cloud / vps providers that support ipv6. ... Softlayer and Arpnetworks come to mind. I have used both with a high level of sucess
VR.org (Host Virtual) as well. I've asked about IPv6 BGP support and while I haven't tried it yet they say that can do that too. ~Seth
Sent from my iPad On Jun 14, 2012, at 12:25 PM, Seth Mattinen <sethm@rollernet.us> wrote:
On 6/13/12 9:10 PM, Cameron Byrne wrote:
On Jun 13, 2012 8:29 PM, "Grant Ridder" <shortdudey123@gmail.com> wrote:
Hi,
I have a Hurricane Electric v6 tunnel setup on an AWS (amazon web
services)
instance so that i can have ipv6 connectivity. I can ping and traceroute out of the tunnel fine, but am unable to access the tunnel from outside. For example, i am unable to traceroute to the tunnel address outside the tunnel address, even with the AWS instance firewall completely open. I would like to host a website accessible via IPv6, hence the tunnel setup. Is this possible? if so, what could i be doing wrong? Or is there a better was to go about this?
Thanks, Grant
Sigh.
Or you could take your business to the dozen or so cloud / vps providers that support ipv6. ... Softlayer and Arpnetworks come to mind. I have used both with a high level of sucess
VR.org (Host Virtual) as well. I've asked about IPv6 BGP support and while I haven't tried it yet they say that can do that too.
~Seth
VR is fully dual stack support throughout their network and a good bunch of guys. With LINODE, they're mixed since some of the colos they are in have IPv6 (like HE, for example) and some don't. So if you go with LINODE, make sure they know to put you in a location with IPv6. (note this may be out of date and they may have IPv6 everywhere by now, as I know they were working on it) To the best of my knowledge, both provide excellent services at competitive prices. There's a soft spot in my heart for VR because I have done some work for them and I like the two guys that run it. Owen
On Thu, Jun 14, 2012 at 12:43 PM, Owen DeLong <owen@delong.com> wrote:
Sent from my iPad
On Jun 14, 2012, at 12:25 PM, Seth Mattinen <sethm@rollernet.us> wrote:
On 6/13/12 9:10 PM, Cameron Byrne wrote:
On Jun 13, 2012 8:29 PM, "Grant Ridder" <shortdudey123@gmail.com> wrote:
Hi,
I have a Hurricane Electric v6 tunnel setup on an AWS (amazon web
services)
instance so that i can have ipv6 connectivity. I can ping and traceroute out of the tunnel fine, but am unable to access the tunnel from outside. For example, i am unable to traceroute to the tunnel address outside the tunnel address, even with the AWS instance firewall completely open. I would like to host a website accessible via IPv6, hence the tunnel setup. Is this possible? if so, what could i be doing wrong? Or is there a better was to go about this?
Thanks, Grant
Sigh.
Or you could take your business to the dozen or so cloud / vps providers that support ipv6. ... Softlayer and Arpnetworks come to mind. I have used both with a high level of sucess
VR.org (Host Virtual) as well. I've asked about IPv6 BGP support and while I haven't tried it yet they say that can do that too.
~Seth
VR is fully dual stack support throughout their network and a good bunch of guys.
With LINODE, they're mixed since some of the colos they are in have IPv6 (like HE, for example) and some don't. So if you go with LINODE, make sure they know to put you in a location with IPv6. (note this may be out of date and they may have IPv6 everywhere by now, as I know they were working on it)
To the best of my knowledge, both provide excellent services at competitive prices. There's a soft spot in my heart for VR because I have done some work for them and I like the two guys that run it.
Owen
Linode now has IPv6 in all the DCs they colo in - http://blog.linode.com/2012/02/28/native-ipv6-now-available-in-all-locations... -- Sadiq S O< ascii ribbon campaign - stop html mail - www.asciiribbon.org
participants (7)
-
alejandroacostaalamo@gmail.com
-
Cameron Byrne
-
Christopher Morrow
-
Grant Ridder
-
Owen DeLong
-
Sadiq Saif
-
Seth Mattinen