All mpls-interfaces are listed and policy is just traffic-eng ospf. Nick From: James Cornman <james@atlanticmetro.net> Sent: Wednesday, November 13, 2019 2:43 PM To: Fawcett, Nick <nfawcett@corp.mtco.com> Cc: nanog@nanog.org Subject: Re: Brocade CER MPLS Ensure that 'mpls-interface xxx' is on for all of the interfaces, and also ensure that any traffic-engineering options match on both sides. "show mpls lsp detail" should show some other info that may be helpful here. On Wed, Nov 13, 2019 at 3:24 PM Fawcett, Nick via NANOG <nanog@nanog.org<mailto:nanog@nanog.org>> wrote: I have one CER (let’s call him Charlie) that is not able to build an LSP tunnel to another CER. Shows “Currently found no route. Will schedule for retry”. Both CER’s can ping and traceroute each other. When I had the LSP to the destination router (Snoopy) it adds the LSP and shows UP in status field. Both have the same number of routes in their ospf table. Charlie has other LSP’s built to other CER’s on the network with productive VLL’s and VPLS’s. I have removed both lsp’s from both Charlie and Snoopy and re-added them and only one Snoopy’s LSP comes up. Any ideas? Nick -- Checked by SOPHOS http://www.sophos.com -- James Cornman Chief Technology Officer jcornman@atlanticmetro.net<mailto:jcornman@atlanticmetro.net> 212.792.9950 - ext 101 Atlantic Metro Communications 4 Century Drive, Parsippany NJ 07054 Cloud Hosting • Colocation • Network Connectivity • Managed Services Follow us on Twitter: @atlanticmetro<https://twitter.com/atlanticmetro> • Like us on Facebook<https://www.facebook.com/atlanticmetro> www.atlanticmetro.net<https://www.atlanticmetro.net/> -- Checked by SOPHOS http://www.sophos.com
What version of Netiron are you running on each and do they both have the adv license key enabled? do show license it should show: [image: image.png] Erich Kaiser The Fusion Network erich@gotfusion.net Office: 815-570-3101 On Wed, Nov 13, 2019 at 2:54 PM Fawcett, Nick via NANOG <nanog@nanog.org> wrote:
All mpls-interfaces are listed and policy is just traffic-eng ospf.
Nick
*From:* James Cornman <james@atlanticmetro.net> *Sent:* Wednesday, November 13, 2019 2:43 PM *To:* Fawcett, Nick <nfawcett@corp.mtco.com> *Cc:* nanog@nanog.org *Subject:* Re: Brocade CER MPLS
Ensure that 'mpls-interface xxx' is on for all of the interfaces, and also ensure that any traffic-engineering options match on both sides. "show mpls lsp detail" should show some other info that may be helpful here.
On Wed, Nov 13, 2019 at 3:24 PM Fawcett, Nick via NANOG <nanog@nanog.org> wrote:
I have one CER (let’s call him Charlie) that is not able to build an LSP tunnel to another CER. Shows “Currently found no route. Will schedule for retry”. Both CER’s can ping and traceroute each other. When I had the LSP to the destination router (Snoopy) it adds the LSP and shows UP in status field. Both have the same number of routes in their ospf table. Charlie has other LSP’s built to other CER’s on the network with productive VLL’s and VPLS’s. I have removed both lsp’s from both Charlie and Snoopy and re-added them and only one Snoopy’s LSP comes up. Any ideas?
Nick
--
Checked by SOPHOS http://www.sophos.com
--
*James Cornman*
*Chief Technology Officer *jcornman@atlanticmetro.net 212.792.9950 - ext 101
* Atlantic Metro Communications*
*4 Century Drive, Parsippany NJ 07054*
*Cloud Hosting • Colocation • Network Connectivity • Managed Services*
Follow us on Twitter: @atlanticmetro <https://twitter.com/atlanticmetro> *• Like us on Facebook <https://www.facebook.com/atlanticmetro>* www.atlanticmetro.net
--
Checked by SOPHOS http://www.sophos.com
participants (2)
-
Fawcett, Nick -
Kaiser, Erich