All mpls-interfaces are listed and policy is just traffic-eng ospf.
Nick
From: James Cornman <james@atlanticmetro.net>
Sent: Wednesday, November 13, 2019 2:43 PM
To: Fawcett, Nick <nfawcett@corp.mtco.com>
Cc: nanog@nanog.org
Subject: Re: Brocade CER MPLS
Ensure that 'mpls-interface xxx' is on for all of the interfaces, and also ensure that any traffic-engineering options match on both sides. "show mpls lsp detail" should show some other info that may be helpful here.
On Wed, Nov 13, 2019 at 3:24 PM Fawcett, Nick via NANOG <nanog@nanog.org> wrote:
I have one CER (let’s call him Charlie) that is not able to build an LSP tunnel to another CER. Shows “Currently found no route. Will schedule for retry”. Both CER’s can ping and traceroute each other. When I had the LSP to the destination router (Snoopy) it adds the LSP and shows UP in status field. Both have the same number of routes in their ospf table. Charlie has other LSP’s built to other CER’s on the network with productive VLL’s and VPLS’s. I have removed both lsp’s from both Charlie and Snoopy and re-added them and only one Snoopy’s LSP comes up. Any ideas?
Nick
--Checked by SOPHOS http://www.sophos.com
--James Cornman
Chief Technology Officer
jcornman@atlanticmetro.net
212.792.9950 - ext 101
Atlantic Metro Communications4 Century Drive, Parsippany NJ 07054
Cloud Hosting • Colocation • Network Connectivity • Managed ServicesFollow us on Twitter: @atlanticmetro • Like us on Facebook
www.atlanticmetro.net--Checked by SOPHOS http://www.sophos.com