That’s it! Thanks dip Using “signalled-bandwidth 5000” on headend te-tunnel int RP/0/0/CPU0:r20#sh run int tt1 Fri Sep 4 13:27:14.833 CST interface tunnel-te1 bandwidth 200000 ipv4 unnumbered Loopback0 signalled-name r20--->r22 signalled-bandwidth 5000 autoroute announce ! destination 10.20.0.22 path-option 10 dynamic ! On HE… RP/0/0/CPU0:r20#sh mpls traffic-eng tunnels name r20--->r22 | in and Fri Sep 4 13:28:28.918 CST Name: tunnel-te1 Destination: 10.20.0.22 Ifhandle:0x1d0 Bandwidth Requested: 5000 kbps CT0 Bandwidth: 5000 kbps (CT0) Priority: 7 7 Affinity: 0x0/0xffff RP/0/0/CPU0:r20#sh rsvp reservation detail | in ate Fri Sep 4 13:25:51.509 CST Rate: 0 bits/sec. Burst: 1K bytes. Peak: 0 bits/sec. State expires in 0.000 sec. Rate: 5000000 bits/sec. Burst: 1K bytes. Peak: 5M bits/sec. State expires in 358.630 sec. RP/0/0/CPU0:r20#sh rsvp int Fri Sep 4 13:26:03.738 CST *: RDM: Default I/F B/W % : 75% [default] (max resv/bc0), 0% [default] (bc1) Interface MaxBW (bps) MaxFlow (bps) Allocated (bps) MaxSub (bps) ------------------------- ------------ ------------- -------------------- ------------- GigabitEthernet0/0/0/0 750M* 750M 0 ( 0%) 0* GigabitEthernet0/0/0/1 750M* 750M 5M ( 0%) 0* On transit lsr in core… RP/0/0/CPU0:r24#sh rsvp session detail | in ate Fri Sep 4 13:18:25.258 CST Tspec: avg rate=0, burst=1K, peak rate=0 Fspec: avg rate=0, burst=1K, peak rate=0 Tspec: avg rate=5M, burst=1K, peak rate=5M Fspec: avg rate=5M, burst=1K, peak rate=5M RP/0/0/CPU0:r24#sh rsvp int Fri Sep 4 13:18:33.508 CST *: RDM: Default I/F B/W % : 75% [default] (max resv/bc0), 0% [default] (bc1) Interface MaxBW (bps) MaxFlow (bps) Allocated (bps) MaxSub (bps) ------------------------- ------------ ------------- -------------------- ------------- GigabitEthernet0/0/0/0 750M* 750M 0 ( 0%) 0* GigabitEthernet0/0/0/1 750M* 750M 5M ( 0%) 0*