That’s it! Thanks dip
Using “signalled-bandwidth 5000” on headend te-tunnel int
RP/0/0/CPU0:r20#sh run int tt1
Fri Sep 4 13:27:14.833 CST
interface tunnel-te1
bandwidth 200000
ipv4 unnumbered Loopback0
signalled-name r20--->r22
signalled-bandwidth 5000
autoroute announce
!
destination 10.20.0.22
path-option 10 dynamic
!
On HE…
RP/0/0/CPU0:r20#sh mpls traffic-eng tunnels name r20--->r22 | in and
Fri Sep 4 13:28:28.918 CST
Name: tunnel-te1 Destination: 10.20.0.22 Ifhandle:0x1d0
Bandwidth Requested: 5000 kbps CT0
Bandwidth: 5000 kbps (CT0) Priority: 7 7 Affinity: 0x0/0xffff
RP/0/0/CPU0:r20#sh rsvp reservation detail | in ate
Fri Sep 4 13:25:51.509 CST
Rate: 0 bits/sec. Burst: 1K bytes. Peak: 0 bits/sec.
State expires in 0.000 sec.
Rate: 5000000 bits/sec. Burst: 1K bytes. Peak: 5M bits/sec.
State expires in 358.630 sec.
RP/0/0/CPU0:r20#sh rsvp int
Fri Sep 4 13:26:03.738 CST
*: RDM: Default I/F B/W % : 75% [default] (max resv/bc0), 0% [default] (bc1)
Interface MaxBW (bps) MaxFlow (bps) Allocated (bps) MaxSub (bps)
------------------------- ------------ ------------- -------------------- -------------
GigabitEthernet0/0/0/0 750M* 750M 0 ( 0%) 0*
GigabitEthernet0/0/0/1 750M* 750M 5M ( 0%) 0*
On transit lsr in core…
RP/0/0/CPU0:r24#sh rsvp session detail | in ate
Fri Sep 4 13:18:25.258 CST
Tspec: avg rate=0, burst=1K, peak rate=0
Fspec: avg rate=0, burst=1K, peak rate=0
Tspec: avg rate=5M, burst=1K, peak rate=5M
Fspec: avg rate=5M, burst=1K, peak rate=5M
RP/0/0/CPU0:r24#sh rsvp int
Fri Sep 4 13:18:33.508 CST
*: RDM: Default I/F B/W % : 75% [default] (max resv/bc0), 0% [default] (bc1)
Interface MaxBW (bps) MaxFlow (bps) Allocated (bps) MaxSub (bps)
------------------------- ------------ ------------- -------------------- -------------
GigabitEthernet0/0/0/0 750M* 750M 0 ( 0%) 0*
GigabitEthernet0/0/0/1 750M* 750M 5M ( 0%) 0*