This is a problem because igp issues: nnn-7202(config)#router ospf 1 nnn-7202(config-router)#maximum-paths ? <1-6> Number of paths Because of this, you are unable to hanle those multiple paths past 6. You also have the same isues with isis: nnn-7202(config)#router isis home1 nnn-7202(config-router)#maximum-paths ? <1-6> Number of paths I don't have a pdf viewer (on this machine), so can't cite this right now, but I think that the dl imux will handle up to 8 E1's: http://www.dl.com/online/datashts/dl3800e.pdf - jared On Fri, Sep 18, 1998 at 09:57:08AM +0200, Jesper Skriver wrote:
Hi,
How would you loadshare over many (>6) parallel E1 links. Currently we do it by connecting them directly to the Cisco's in each end, and do CEF based per-packet loadsharing, it works fine, but support a max of 6 E1's ...
I've been thinking om something similar to the Larscom inverse MUX (http://www.larscom.com/t3ft3/t3_megae.htm), but this one only support 4 E1's, then I can use multiple i-mux's and loadshare over the 8M links they provide, but it seems like a poor solution.
Yes, I do know that a E3 would be a far better choice, but our ADM (Add-Drop-Multiplexer??) at this specific location only support E1's :-(
/Jesper
-- Jesper Skriver (JS249-RIPE), Network manager Tele Danmark DataNet, IP section (AS3292)
One Unix to rule them all, One Resolver to find them, One IP to bring them all and in the zone to bind them.
-- Jared Mauch | pgp key available via finger from jared@puck.nether.net | http://puck.nether.net/~jared/