-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello All: I'm wondering if anyone has seen a good and cheap(er) solution for providing multiple Gigabit Ethernet circuits over single pair of fiber. I'm looking for a way to do CWDM or DWDM that's cheaper than putting in a Cisco 15454 or 15327. I'm only going to be doing 2 GigE circuits between two switches, so I don't need to plan for future growth. If anyone knows of a magic box that will do the above I would love to hear about it. Thanks, Mike - -- Michael K. Smith NoaNet 206.219.7116 (work) 866.662.6380 (NOC) mksmith@noanet.net http://www.noanet.net -----BEGIN PGP SIGNATURE----- Version: PGP 8.0.3 iQA/AwUBQLyiVJzgx7Y34AxGEQIDewCfR8JQG2jqbxsBopUE6u3FUnfiX3UAoODx 41QL7T1eyK1EQ4ZMnVJU+l2p =hDVT -----END PGP SIGNATURE-----
What you could try is use the Cisco CWDM-MUX-4 and it's pluggable optics that can be fit into any GBIC 802.3z compliant slot. It's just an OADM with 4 or 8 wavelengths that delivers GigE to any box with pluggable GBICs provided you use the right optics and it's quite a bit cheaper than using ONS stuff. That said, CWDM doesn't get you much further than 80 kilometres, above that DWDM is your only option, and a hell of a lot more expensive. Cheers, -- --- Erik Haagsman Network Architect We Dare BV tel: +31(0)10 7507008 fax:+31(0)10 7507005 http://www.we-dare.nl On Tue, 2004-06-01 at 17:30, Michael Smith wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hello All:
I'm wondering if anyone has seen a good and cheap(er) solution for providing multiple Gigabit Ethernet circuits over single pair of fiber. I'm looking for a way to do CWDM or DWDM that's cheaper than putting in a Cisco 15454 or 15327. I'm only going to be doing 2 GigE circuits between two switches, so I don't need to plan for future growth.
If anyone knows of a magic box that will do the above I would love to hear about it.
Thanks,
Mike
- -- Michael K. Smith NoaNet 206.219.7116 (work) 866.662.6380 (NOC) mksmith@noanet.net http://www.noanet.net
-----BEGIN PGP SIGNATURE----- Version: PGP 8.0.3
iQA/AwUBQLyiVJzgx7Y34AxGEQIDewCfR8JQG2jqbxsBopUE6u3FUnfiX3UAoODx 41QL7T1eyK1EQ4ZMnVJU+l2p =hDVT -----END PGP SIGNATURE-----
Finisar also has CWDM optics in both the SFP and GBIC form factor and they are quite a bit less expensive than the Cisco solution and they do have a 16 lambda passive OADM as well as the 4 and 8 lambda models. Scott C. McGrath On Tue, 1 Jun 2004, Erik Haagsman wrote:
What you could try is use the Cisco CWDM-MUX-4 and it's pluggable optics that can be fit into any GBIC 802.3z compliant slot. It's just an OADM with 4 or 8 wavelengths that delivers GigE to any box with pluggable GBICs provided you use the right optics and it's quite a bit cheaper than using ONS stuff. That said, CWDM doesn't get you much further than 80 kilometres, above that DWDM is your only option, and a hell of a lot more expensive.
Cheers,
-- --- Erik Haagsman Network Architect We Dare BV tel: +31(0)10 7507008 fax:+31(0)10 7507005 http://www.we-dare.nl
On Tue, 2004-06-01 at 17:30, Michael Smith wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hello All:
I'm wondering if anyone has seen a good and cheap(er) solution for providing multiple Gigabit Ethernet circuits over single pair of fiber. I'm looking for a way to do CWDM or DWDM that's cheaper than putting in a Cisco 15454 or 15327. I'm only going to be doing 2 GigE circuits between two switches, so I don't need to plan for future growth.
If anyone knows of a magic box that will do the above I would love to hear about it.
Thanks,
Mike
- -- Michael K. Smith NoaNet 206.219.7116 (work) 866.662.6380 (NOC) mksmith@noanet.net http://www.noanet.net
-----BEGIN PGP SIGNATURE----- Version: PGP 8.0.3
iQA/AwUBQLyiVJzgx7Y34AxGEQIDewCfR8JQG2jqbxsBopUE6u3FUnfiX3UAoODx 41QL7T1eyK1EQ4ZMnVJU+l2p =hDVT -----END PGP SIGNATURE-----
Be warned that you can't use non-Cisco CWDM SFPs or GBICs in a cisco switch or router... There is a PROM code in the cisco-sold units that is identified by IOS. Plug in a non-cisco SFP/GBIC and it will shut down the port. (This was discussed about 9 months ago on nanog-l, it should be in the archives). Does anyone actually buy the $3500 CWDM SFPs? That's a $3300 profit margin for Cisco... Scott McGrath wrote:
Finisar also has CWDM optics in both the SFP and GBIC form factor and they are quite a bit less expensive than the Cisco solution and they do have a 16 lambda passive OADM as well as the 4 and 8 lambda models.
Scott C. McGrath
On Tue, 1 Jun 2004, Erik Haagsman wrote:
What you could try is use the Cisco CWDM-MUX-4 and it's pluggable optics that can be fit into any GBIC 802.3z compliant slot. It's just an OADM with 4 or 8 wavelengths that delivers GigE to any box with pluggable GBICs provided you use the right optics and it's quite a bit cheaper than using ONS stuff. That said, CWDM doesn't get you much further than 80 kilometres, above that DWDM is your only option, and a hell of a lot more expensive.
Cheers,
-- --- Erik Haagsman Network Architect We Dare BV tel: +31(0)10 7507008 fax:+31(0)10 7507005 http://www.we-dare.nl
On Tue, 2004-06-01 at 17:30, Michael Smith wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hello All:
I'm wondering if anyone has seen a good and cheap(er) solution for providing multiple Gigabit Ethernet circuits over single pair of fiber. I'm looking for a way to do CWDM or DWDM that's cheaper than putting in a Cisco 15454 or 15327. I'm only going to be doing 2 GigE circuits between two switches, so I don't need to plan for future growth.
If anyone knows of a magic box that will do the above I would love to hear about it.
Thanks,
Mike
- -- Michael K. Smith NoaNet 206.219.7116 (work) 866.662.6380 (NOC) mksmith@noanet.net http://www.noanet.net
-----BEGIN PGP SIGNATURE----- Version: PGP 8.0.3
iQA/AwUBQLyiVJzgx7Y34AxGEQIDewCfR8JQG2jqbxsBopUE6u3FUnfiX3UAoODx 41QL7T1eyK1EQ4ZMnVJU+l2p =hDVT -----END PGP SIGNATURE-----
participants (4)
-
Eric Kuhnke -
Erik Haagsman -
Michael Smith -
Scott McGrath