We are running 10.2R3 for 10 x EX4200. Everything is working fine ... from VC to BGP and virtual routers.

On Mon, Nov 8, 2010 at 2:59 PM, Richard A Steenbergen <ras@e-gerbil.net>wrote:

...

On Mon, Nov 08, 2010 at 11:43:55AM -0800, Mehmet Akcin wrote:

...

Hi Keegan,

I always try to go with

https://www.juniper.net/customers/csc/software/junos_software_versions.jsp

Based on past experience, I find this list to be a giant load of horse shit. You'd have better luck picking good versions of code with a magic 8ball.

hahahahah For one, I don't think I would have taken that quite as seriously coming from anyone else. Secondly I'm new here, but it's better than NANOG.

...

Unfortunately I can't tell you specifically what works best for L2 on EX4200 because we use none of the first and very little of the second, but I can give you a very very long list of reasons why 10.2R3 is (at this exact moment) the best choice for EX8200 doing routing.

We use the big cats for this but this may help someone I know. Thanks.

...

-- Richard A Steenbergen <ras@e-gerbil.net> http://www.e-gerbil.net/ras GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)

_______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp