Hi. I need some help. I hope some of you are able to help me :) I configured a pppoe server on a brand new asr 920 plateform (advanced metro ip access) but it's not working. My set up is trivial : 1/ Add a bba-group and a virtual template : bba-group pppoe BBAPPPOE virtual-template 1 sessions per-mac limit 2 interface Virtual-Template1 ip unnumbered Loopback0 no peer default ip address ppp authentication pap CPE_USER 2/ Then, configure the Radius : aaa group server radius<removed> server<removed> auth-port 1812 acct-port 1813 ip radius source-interface Loopback0 ! aaa authentication ppp CPE_USER group <removed> aaa authorization network default group removed> radius-server host<removed> auth-port 1812 acct-port 1813 key 7 <removed> 3/ Finally, I configured an interface accepting pppoe : interface GigabitEthernet0/0/4 description TEST-PPPOE no ip address media-type rj45 negotiation auto pppoe enable group BBAPPPOE A router, plugged on the interface Gi 0/0/4, is sending pado packets but ASR920 is not seeing these packets : Counters does not increment, debug says nothing. ASR920-ALE-1#sh pppoe statistics But I can see input packets with ASR920-ALE-1# sh interfaces Gi 0/0/4 Has anyone have experience with pppoe server on a ASR920 ? Thanks a lot :) Nicolas.