And if all else fails, of course, you should contact cisco tech support folks, not NANOG folk. - ferg Owen writes: ============ int ethernet 0/0.0 encap 802.1q 532 You can't spec the encap on the parent interface. You must do it on the sub int. Owen --On Friday, October 24, 2003 02:49:15 AM -0700 Roman Volf <volfman@keystreams.com> wrote:

Show Version:

Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3620-I-M), Version 12.2(12a), RELEASE SOFTWARE

(fc1)

flash image: System image file is "flash:c3620-i-mz.122-12a.bin"

I'm trying to configure a FastEthernet sub interface for 802.1q VLANs, but theres no encapsulation command. I've googled it up for about 2 hours and have come up with nothing... the following command sequence is documented dozens of times:

As shown on:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120... interface fastethernet slot/port.subinterface-number encapsulation dot1q vlanid

Any help would be appreciated.

-- "Fergie", a.k.a. Paul Ferguson Engineering Architecture for the Intern ferguson@employees.org or fergdawg@netzero.net