Ok so we just got a new 7206 to play with and I want to try out the cflowd stuff. The problem I have is that the version of IOS 11.2(12)p doesn't have the ip flow-export {various commands} command. It only has the ip flow-export A.B.C.D udp-port command So did we get the right version, is there something missing that I need to get??? Any help would be great.... Even when I just use this version of the command I don't get any packets on the udp-port / host that I specify. Mr. Sniffer doesn't show anything at all......... jmbrown@ihighway.net
John, you need IOS 11.1[CA,CC] for netflow type 5. I guess you want AS number export. Also, you need to add "ip route-cache flow" for all interfaces that you want netflow data from. You can verify with "show ip cache flow" that it's running. Regards Anders Lowinger
Ok so we just got a new 7206 to play with and I want to try out the cflowd stuff. The problem I have is that the version of IOS 11.2(12)p doesn't have the ip flow-export {various commands} command. It only has the
ip flow-export A.B.C.D udp-port command
So did we get the right version, is there something missing that I need to get??? Any help would be great....
Even when I just use this version of the command I don't get any packets on the udp-port / host that I specify. Mr. Sniffer doesn't show anything at all.........
jmbrown@ihighway.net
John M. Brown wrote:
Ok so we just got a new 7206 to play with and I want the version of IOS 11.2(12)p doesn't have the
jmbrown@ihighway.net
Hey John... do yourself a favor and run the CC of 11.1, something like 11.1.19(CC) has been very good for us. Supports pretty much all the interfaces, has all the neat features (CEF, CAR, FlowExport, etc), and is a bit more stable than 11.2.x...
John M. Brown wrote:
Ok so we just got a new 7206 to play with and I want the version of IOS 11.2(12)p doesn't have the
jmbrown@ihighway.net
Hey John...
do yourself a favor and run the CC of 11.1, something like 11.1.19(CC) has been very good for us. Supports pretty much all the interfaces, has all the neat features (CEF, CAR, FlowExport, etc), and is a bit more stable than 11.2.x...
FYI: 11.1(19)CC has been deferred. I would recommend using 11.1(19)CC1. Cheers, Chris -- Christian Kuhtz, BellSouth, Sr. Network Architect <ck@bellsouth.net> 1100 Ashwood Parkway, Atlanta, GA 30338 <ck@gnu.org>
At 01:28 PM 7/5/98 -0400, Christian Kuhtz wrote:
FYI: 11.1(19)CC has been deferred. I would recommend using 11.1(19)CC1.
I was told that 11.1.20 had the CC/CA features rolled into the mainstream release. Can anyone confirm this?
Christian Kuhtz, BellSouth, Sr. Network Architect <ck@bellsouth.net>
TTFN, patrick ************************************************************** Patrick W. Gilmore voice: +1-650-482-2840 Director of Operations, CCIE #2983 fax: +1-650-482-2844 PRIORI NETWORKS, INC. http://www.priori.net "Tomorrow's Performance.... Today" **************************************************************
Ok so we just got a new 7206 to play with and I want to try out the cflowd stuff. The problem I have is that the version of IOS 11.2(12)p doesn't have the ip flow-export {various commands} command. It only has the ip flow-export A.B.C.D udp-port command So did we get the right version, is there something missing that I need to get??? Any help would be great.... Even when I just use this version of the command I don't get any packets on the udp-port / host that I specify. Mr. Sniffer doesn't show anything at all......... 11.2 is pretty basic as far as NetFlow is concerned. I suggest you try 11.1(19)CC and then specify version 5 or 6 of NetFlow. Mark.
participants (6)
-
Alex Rubenstein -
Anders Lowinger -
Christian Kuhtz -
John M. Brown -
Mark Prior -
Patrick W. Gilmore