%SYS-2-GETBUF: Bad getbuffer, bytes= 40470 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 %SYS-5-CONFIG_I: Configured from console by vty1 (203.55.84.2) %SYS-2-GETBUF: Bad getbuffer, bytes= 38198 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 %SYS-2-GETBUF: Bad getbuffer, bytes= 62691 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 %SYS-2-GETBUF: Bad getbuffer, bytes= 38118 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial12/6, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial12/6, changed state to up %SYS-2-GETBUF: Bad getbuffer, bytes= 60021 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 %SYS-2-GETBUF: Bad getbuffer, bytes= 56788 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 I have been getting pages of these lately. Its a 7513 w/ dual RSP2 modules and 64mb RAM. Its running IOS 11.2(8) P w/ 1 SSIP controller (8 Serial). 1 VIP2 controller (1 FastEthernet)(4 Serial). 1 FastEthernet/IEEE 802.3 interface(s) 12 Serial network interface(s) Has anyone on the list come across this before? Adrian
RTFM: http://www.cisco.com/univercd/data/doc/software/11_2/em/ess4t.htm#HDR16 Error Message: %SYS-2-FREEBAD: Attempted to free memory at [hex], not part of buffer pool %SYS-2-FREEFREE: Attempted to free unassigned memory at[hex], alloc [hex] dealloc [hex] %SYS-2-GETBUF: Bad getbuffer, bytes= [dec] %SYS-3-HARIKARI: Process [chars] top-level routine exited %SYS-2-HEADER: Attempt to return buffer with invalid buffer header, ptr= [hex] Explanation: An internal software error occurred. Recommended Action If any of these messages recur, copy the message exactly as it appears and contact your technical support representative for assistance. Randy At 09:22 PM 12/9/97 +1100, you wrote:
%SYS-2-GETBUF: Bad getbuffer, bytes= 40470 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 %SYS-5-CONFIG_I: Configured from console by vty1 (203.55.84.2) %SYS-2-GETBUF: Bad getbuffer, bytes= 38198 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 %SYS-2-GETBUF: Bad getbuffer, bytes= 62691 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 %SYS-2-GETBUF: Bad getbuffer, bytes= 38118 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial12/6, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial12/6, changed state to up %SYS-2-GETBUF: Bad getbuffer, bytes= 60021 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 %SYS-2-GETBUF: Bad getbuffer, bytes= 56788 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
I have been getting pages of these lately.
Its a 7513 w/ dual RSP2 modules and 64mb RAM. Its running IOS 11.2(8) P w/
1 SSIP controller (8 Serial). 1 VIP2 controller (1 FastEthernet)(4 Serial). 1 FastEthernet/IEEE 802.3 interface(s) 12 Serial network interface(s)
Has anyone on the list come across this before?
Adrian
Can you paste a 'sh buff' in here as it looks like you are out of buffers. - Aaron Hughes - UltraNet Communications, Inc. - aaronh@ultra.net. On Tue, 9 Dec 1997, Adrian Chadd wrote:
%SYS-2-GETBUF: Bad getbuffer, bytes= 40470 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 %SYS-5-CONFIG_I: Configured from console by vty1 (203.55.84.2) %SYS-2-GETBUF: Bad getbuffer, bytes= 38198 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 %SYS-2-GETBUF: Bad getbuffer, bytes= 62691 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 %SYS-2-GETBUF: Bad getbuffer, bytes= 38118 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial12/6, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial12/6, changed state to up %SYS-2-GETBUF: Bad getbuffer, bytes= 60021 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 %SYS-2-GETBUF: Bad getbuffer, bytes= 56788 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
I have been getting pages of these lately.
Its a 7513 w/ dual RSP2 modules and 64mb RAM. Its running IOS 11.2(8) P w/
1 SSIP controller (8 Serial). 1 VIP2 controller (1 FastEthernet)(4 Serial). 1 FastEthernet/IEEE 802.3 interface(s) 12 Serial network interface(s)
Has anyone on the list come across this before?
Adrian
People, you can debug this with your vendor. It's not what nanog is for. Really. --jhawk
Can you paste a 'sh buff' in here as it looks like you are out of buffers.
- Aaron Hughes - UltraNet Communications, Inc. - aaronh@ultra.net.
On Tue, 9 Dec 1997, Adrian Chadd wrote:
%SYS-2-GETBUF: Bad getbuffer, bytes= 40470 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
participants (4)
-
Aaron Hughes -
Adrian Chadd -
John Hawkinson -
Randall S. Benn