On Thu, Oct 7, 2010 at 1:24 AM, Peter Rudasingwa <peter.rudasingwa@altechstream.rw> wrote:

I have clients who want a P2P link over STM-1.

How can I achieve this? What kind of equipment do I need.

At the moment I have a cisco 6500 and 7200VXR

Thanks,

Peter R.

Aren't STM-1 links, by their very nature, point-to-point links? I don't think it's very clear what it is you're trying to do that's out of the ordinary here--can you clarify what it is you're trying to achieve? Thanks! Matt

As said above, STM-1s are by their very nature point to point links. You just need an STM-1 interface on your side and another on the customer side. Which one will depend on the router models you will be using. Also, as said above, you will need to engage the help of your local Cisco partner for this.

From your side (I mean the service provider side) you can also have a channelized STM-4 or STM-16 and use one STM-1 channel for this. This would be a good idea if you plan to have more than one customer of this nature. Beware that these interfaces can be quite expensive.

Hope this helps, Carlos On Thu, Oct 7, 2010 at 4:24 AM, Peter Rudasingwa < peter.rudasingwa@altechstream.rw> wrote:

I have clients who want a P2P link over STM-1.

How can I achieve this? What kind of equipment do I need.

At the moment I have a cisco 6500 and 7200VXR

Thanks,

Peter R.

-- -- ========================= Carlos M. Martinez-Cagnazzo http://cagnazzo.name =========================

If it's a full STM-1, your client might be thinking of POS (packet over sonet/sdh). This is (were) a very common high bandwidth technology some years ago. At least the 7200 do have cheap POS interfaces. -- Pelle (sorry about the top-posting, I'm on a mobile device)