You could use load sbgp/mrtd script to load route dumps. There is also bgpsimple http://code.google.com/p/bgpsimple/wiki/README This also brings up another question, anyone know of v6 rib tool on unix to load v6 route dumps. Tks, Patrick. Message: 8 Date: Sun, 27 Jun 2010 22:04:54 -0400 From: Jack Carrozzo <jack@crepinc.com> Subject: Re: BGP Tool for Simulation To: giulianocm@uol.com.br Cc: North American Network Operators Group <nanog@merit.edu> Message-ID: <AANLkTik_iMlcU-GbwJim4VbqT0BtEeAd6AfNBBTn9ArS@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 Roll quagga / BGPd on *nix and bring up sessions with whatever you like. For full tables, you can either hack up a few lines of perl to output a bunch of 'network a.b.c.d' lines from any of the available text looking glasses into the bgpd conf, or just bring up ebgp-multihop session with one of your borders or one of your friends. Prefix lists, communities, etc are all supported. -Jack Carrozzo On Sun, Jun 27, 2010 at 9:32 PM, GIULIANOCM (UOL) <giulianocm@uol.com.br>wrote:
People,
I am looking for a tool (free or not) to simulate BGP full internet route table peering and injection using real CISCO and JUNIPER routers.
We have found some power tools like Spirent or Agilent but they are a too expensive to acquire for now.
The main idea is to have a software tool for unix or linux system, that supports to simulate a cloud a carrier or an ISP, to work with real routers, establishing connection using BGP protocol and injecting on this real routers the full internet routing table - ipv4 or ipv6.
Do you know some collection of tools (software tools) that we can use to do this kind of work ?
It is possible to collect full internet routing table and inject it to a real router using a software for simulate real conditions ?
Besides, the tool will need some additional features in simulation like the set of communities, local preference, med and other BGP attributes.
What do you recommend for this tasks ?
Thanks a lot,
Giuliano
------------------------------ _______________________________________________ NANOG mailing list NANOG@nanog.org https://mailman.nanog.org/mailman/listinfo/nanog End of NANOG Digest, Vol 29, Issue 79 *************************************
I recently came across NetKit that seems to offer what you are looking for... http://wiki.netkit.org/index.php/Main_Page L. On Jun 28, 2010, at 12:32 , Lynchehaun, Patrick (Patrick) wrote:
You could use load sbgp/mrtd script to load route dumps. There is also bgpsimple http://code.google.com/p/bgpsimple/wiki/README This also brings up another question, anyone know of v6 rib tool on unix to load v6 route dumps.
Tks, Patrick.
Message: 8 Date: Sun, 27 Jun 2010 22:04:54 -0400 From: Jack Carrozzo <jack@crepinc.com> Subject: Re: BGP Tool for Simulation To: giulianocm@uol.com.br Cc: North American Network Operators Group <nanog@merit.edu> Message-ID: <AANLkTik_iMlcU-GbwJim4VbqT0BtEeAd6AfNBBTn9ArS@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1
Roll quagga / BGPd on *nix and bring up sessions with whatever you like.
For full tables, you can either hack up a few lines of perl to output a bunch of 'network a.b.c.d' lines from any of the available text looking glasses into the bgpd conf, or just bring up ebgp-multihop session with one of your borders or one of your friends. Prefix lists, communities, etc are all supported.
-Jack Carrozzo
On Sun, Jun 27, 2010 at 9:32 PM, GIULIANOCM (UOL) <giulianocm@uol.com.br>wrote:
People,
I am looking for a tool (free or not) to simulate BGP full internet route table peering and injection using real CISCO and JUNIPER routers.
We have found some power tools like Spirent or Agilent but they are a too expensive to acquire for now.
The main idea is to have a software tool for unix or linux system, that supports to simulate a cloud a carrier or an ISP, to work with real routers, establishing connection using BGP protocol and injecting on this real routers the full internet routing table - ipv4 or ipv6.
Do you know some collection of tools (software tools) that we can use to do this kind of work ?
It is possible to collect full internet routing table and inject it to a real router using a software for simulate real conditions ?
Besides, the tool will need some additional features in simulation like the set of communities, local preference, med and other BGP attributes.
What do you recommend for this tasks ?
Thanks a lot,
Giuliano
------------------------------
_______________________________________________ NANOG mailing list NANOG@nanog.org https://mailman.nanog.org/mailman/listinfo/nanog
End of NANOG Digest, Vol 29, Issue 79 *************************************
participants (2)
-
Luigi Iannone -
Lynchehaun, Patrick (Patrick)