1000mm deep. APC AR3100 racks are 600mm x 1070mm. APC also makes 1200mm deep ones, and 750mm wide ones, and both together. On Wed, Aug 07, 2019 at 04:12:26PM +0000, Richard McGovern wrote:
Pete "1000 deep rack"?? Is that fathoms __
Richard McGovern Sr Sales Engineer, Juniper Networks 978-618-3342
I’d rather be lucky than good, as I know I am not good I don’t make the news, I just report it
On 8/7/19, 6:20 AM, "Pete Webb" <Pete.Webb@virtual1.com> wrote:
No mate, I made the same mistake. Minimum you can get away with is 1000 deep racks, and even then you have to leave the front air filter off.
Pete
-----Original Message----- From: juniper-nsp <juniper-nsp-bounces@puck.nether.net> On Behalf Of Sander Steffann Sent: 30 July 2019 13:32 To: nanog <nanog@nanog.org>; Juniper List <juniper-nsp@puck.nether.net> Subject: [j-nsp] MX10003 rack size
Hi,
Has anyone ever managed to fit a Juniper MX10003 in a 90cm deep rack? Without applying power tools to either the rack or the router ;)
Cheers, Sander
On 07/08/2019 17:15, Anderson, Charles R wrote:
1000mm deep. APC AR3100 racks are 600mm x 1070mm. APC also makes 1200mm deep ones, and 750mm wide ones, and both together.
Unsure as to why this was cross-posted, but... Many vendors do these sizes now. 600x1200 is rather useful when you have meter-long servers and need to get four 0U PDUs in at the back. :) Neatly fits on to common 600mm² footprints, too. I quite liked 750mm APCs, but last I looked I recall that they've shifted to 800mm wide now? Instead of having to do 4x750 racks in 5x600 footprints to line them up, you can now do 3x800 racks in 4x600 footprints. Fewer snowflake racks messing up the rack/footprint alignment, and you get more room per rack. -- Tom
participants (2)
-
Anderson, Charles R -
Tom Hill