http://mydeviceinfo.comcast.net is up to date and will have more devices this year. If the device is a standalone modem and has IPv6 checked you need to make sure your customer owned CPE supports IPv6 *AND* is enabled. Otherwise if it is an integrated device provided by Comcast or via retails, once the IPv6 checked box is checked IPv6 support will be enabled by default. However, please note in cases where the router can be disabled I will not override your selection. Integrated devices in router mode will be IPv6 enabled by default. John ========================================= John Jason Brzozowski Comcast Cable m) +1-609-377-6594 e) mailto:john_brzozowski@cable.comcast.com o) +1-484-962-0060 w) http://www.comcast6.net ========================================= -----Original Message----- From: "nanog-request@nanog.org" <nanog-request@nanog.org> Reply-To: NANOG <nanog@nanog.org> Date: Wednesday, January 30, 2013 9:20 PM To: NANOG <nanog@nanog.org> Subject: NANOG Digest, Vol 60, Issue 113

Looking at http://mydeviceinfo.comcast.net you get a choice of wireless or IPv6 in Arris.