fs.com dwdm equipment
Hello All, Does anybody have experience with fs.com dwdm equipment in their production environment? Are you they working without any issue? How's their warranty support if the issue arises? Thanks in advance for all the answers and help.
I tryed SFP, MUX, DEMUX and OADM, all working as expected. Le dim. 17 févr. 2019 19 h 18, Samir Rana <samir.rana@cybera.ca> a écrit :
Hello All,
Does anybody have experience with fs.com dwdm equipment in their production environment? Are you they working without any issue? How's their warranty support if the issue arises?
Thanks in advance for all the answers and help.
They have solid product and good support, I bought many SFP+ for Nexus, Juniper, Force10 and never had a problem with them. HTH Best regards, David S. ------------------------------------------------ e. david@zeromail.us w. pnyet.web.id p. 087881216110 On Mon, Feb 18, 2019 at 9:23 AM Michel Blais <Michel@targointernet.com> wrote:
I tryed SFP, MUX, DEMUX and OADM, all working as expected.
Le dim. 17 févr. 2019 19 h 18, Samir Rana <samir.rana@cybera.ca> a écrit :
Hello All,
Does anybody have experience with fs.com dwdm equipment in their production environment? Are you they working without any issue? How's their warranty support if the issue arises?
Thanks in advance for all the answers and help.
We’ve purchased many SFP modules from fs.com<http://fs.com> for Cisco gear, and the only problem we run into is that Cisco IOS seem unwilling to expose the error counters via SNMP. This is kind of annoying, because that’s how we get early warning of fiber problems. I suspect IOS does this deliberately because it notices the module is not OEM. But the cost savings with fs.com<http://fs.com> is tremendous, so we put up with this inconvenience. On a side note, their sales support is always prompt and very personable. Technical support seems to be limited to offering free advance warranty replacement shipping. With a few hundred modules, we’ve had maybe two dead ones. So less than 1% iinfant mortality on pretty complex optics. -mel On Feb 17, 2019, at 9:01 PM, David S. <david@zeromail.us<mailto:david@zeromail.us>> wrote: They have solid product and good support, I bought many SFP+ for Nexus, Juniper, Force10 and never had a problem with them. HTH Best regards, David S. ------------------------------------------------ e. david@zeromail.us<mailto:david@zeromail.us> w. pnyet.web.id<http://pnyet.web.id/> p. 087881216110 On Mon, Feb 18, 2019 at 9:23 AM Michel Blais <Michel@targointernet.com<mailto:Michel@targointernet.com>> wrote: I tryed SFP, MUX, DEMUX and OADM, all working as expected. Le dim. 17 févr. 2019 19 h 18, Samir Rana <samir.rana@cybera.ca<mailto:samir.rana@cybera.ca>> a écrit : Hello All, Does anybody have experience with fs.com<http://fs.com> dwdm equipment in their production environment? Are you they working without any issue? How's their warranty support if the issue arises? Thanks in advance for all the answers and help.
For managing them, do you use the actual software they ship with it? When I last checked, it requires a MSSQL instance with hard coded “sa” user access which was an immediate no go for me. I still have them sitting in a box in our lab as a teaching aid really. From: NANOG <nanog-bounces@nanog.org> On Behalf Of Michel Blais Sent: Sunday, February 17, 2019 4:56 PM To: Samir Rana <samir.rana@cybera.ca> Cc: nanog@nanog.org Subject: Re: fs.com dwdm equipment I tryed SFP, MUX, DEMUX and OADM, all working as expected. Le dim. 17 févr. 2019 19 h 18, Samir Rana <samir.rana@cybera.ca<mailto:samir.rana@cybera.ca>> a écrit : Hello All, Does anybody have experience with fs.com<https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Ffs.com&data=02%7C01%7C%7Cf9142adc468a43eca0fd08d695483c66%7C453303889ca9424bbe1a29721272041d%7C1%7C0%7C636860534822585025&sdata=7rMsnSDp0LnfO1T8ZDs%2B7Bm%2BYyTe3WLdkM8fyW5aYfY%3D&reserved=0> dwdm equipment in their production environment? Are you they working without any issue? How's their warranty support if the issue arises? Thanks in advance for all the answers and help.
None of our stuff has management, all passive. Once you get into the amps and whatnot, those have management. We'll likely be getting some shortly as we're rebuilding our infrastructure and adding some things. ----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP ----- Original Message ----- From: "Chris Gross" <CGross@ninestarconnect.com> To: "Michel Blais" <Michel@targointernet.com>, "Samir Rana" <samir.rana@cybera.ca> Cc: nanog@nanog.org Sent: Monday, February 18, 2019 12:39:57 AM Subject: RE: fs.com dwdm equipment For managing them, do you use the actual software they ship with it? When I last checked, it requires a MSSQL instance with hard coded “sa” user access which was an immediate no go for me. I still have them sitting in a box in our lab as a teaching aid really. From: NANOG <nanog-bounces@nanog.org> On Behalf Of Michel Blais Sent: Sunday, February 17, 2019 4:56 PM To: Samir Rana <samir.rana@cybera.ca> Cc: nanog@nanog.org Subject: Re: fs.com dwdm equipment I tryed SFP, MUX, DEMUX and OADM, all working as expected. Le dim. 17 févr. 2019 19 h 18, Samir Rana < samir.rana@cybera.ca > a écrit : Hello All, Does anybody have experience with fs.com dwdm equipment in their production environment? Are you they working without any issue? How's their warranty support if the issue arises? Thanks in advance for all the answers and help.
We use it. A lot of it. No problems. Never a need for warranty support. Aaron Sent from my iPad
On Feb 17, 2019, at 12:42 PM, Samir Rana <samir.rana@cybera.ca> wrote:
Hello All,
Does anybody have experience with fs.com dwdm equipment in their production environment? Are you they working without any issue? How's their warranty support if the issue arises?
Thanks in advance for all the answers and help.
Samir, I have purchased over a thousand SFPs from Fiber Store. I can recall less than 5 having problems when we received them (not all even DOA) and I know less than 10 dead even after deployment. Some we have ad running for 4+ years. We have done very little with their SFP+ equipment, really only testing and a few lower priority links. The only downside to the SFPs that we found was the variance of power. Say an Adtran, Cisco, Juniper, HP SFP is rated from -3dB to -8 db (all units I have used them with), the equivalent FS direct SFP we have seen as hot as 3dB and as weak as -15dB. These extremes are fairly rare but we have still seen them. Distribution (approximate): 80% SM single fiber SFPs (mostly 10km - 40km, some 60km & 80km) 7% 1Gb Copper 5% MM SFPs 5% SM dual fiber SFPs 3% others (SFP+, GPON, testing, etc) I have not used them for any DWDM applications and only used them a few times on an older CWDM link that used standard SFPs into a MUX. This was not over great distances (less than 40 miles). With WDM SFP power consistency was important so we did not play much with it, granted most of the SFPs I am purchasing are in the $10-$25 range so take the extremes with a grain of salt. Their sales has always been very responsive and helpful. The support/engineering, the few times I worked with them, were helpful but the language barrier was harder here. Brian ________________________________ From: NANOG <nanog-bounces@nanog.org> on behalf of Samir Rana <samir.rana@cybera.ca> Sent: Sunday, February 17, 2019 12:42 PM To: nanog@nanog.org Subject: fs.com dwdm equipment Hello All, Does anybody have experience with fs.com<http://fs.com> dwdm equipment in their production environment? Are you they working without any issue? How's their warranty support if the issue arises? Thanks in advance for all the answers and help.
I concur. I have also used CWDM and DWDM optics and they are fine. I have had one QSFP+ optic go bad. On Mon, Feb 18, 2019 at 07:47:10PM +0000, Brian R wrote:
Samir,
I have purchased over a thousand SFPs from Fiber Store. I can recall less than 5 having problems when we received them (not all even DOA) and I know less than 10 dead even after deployment. Some we have ad running for 4+ years. We have done very little with their SFP+ equipment, really only testing and a few lower priority links. The only downside to the SFPs that we found was the variance of power. Say an Adtran, Cisco, Juniper, HP SFP is rated from -3dB to -8 db (all units I have used them with), the equivalent FS direct SFP we have seen as hot as 3dB and as weak as -15dB. These extremes are fairly rare but we have still seen them. Distribution (approximate): 80% SM single fiber SFPs (mostly 10km - 40km, some 60km & 80km) 7% 1Gb Copper 5% MM SFPs 5% SM dual fiber SFPs 3% others (SFP+, GPON, testing, etc)
I have not used them for any DWDM applications and only used them a few times on an older CWDM link that used standard SFPs into a MUX. This was not over great distances (less than 40 miles). With WDM SFP power consistency was important so we did not play much with it, granted most of the SFPs I am purchasing are in the $10-$25 range so take the extremes with a grain of salt.
Their sales has always been very responsive and helpful. The support/engineering, the few times I worked with them, were helpful but the language barrier was harder here.
Brian
________________________________ From: NANOG <nanog-bounces@nanog.org> on behalf of Samir Rana <samir.rana@cybera.ca> Sent: Sunday, February 17, 2019 12:42 PM To: nanog@nanog.org Subject: fs.com dwdm equipment
Hello All,
Does anybody have experience with fs.com<http://fs.com dwdm equipment in their production environment? Are you they working without any issue? How's their warranty support if the issue arises?
Thanks in advance for all the answers and help.
Hi, I have both 1Gig and 10Gig DWDM optics from SF.com being using in Cisco and Mikrotik switches. Never had an issue with them. Work flawless .. for years. Kind regards, Martin List-Petersen Airwire Ltd. On 18/02/2019 19:54, Anderson, Charles R wrote:
I concur. I have also used CWDM and DWDM optics and they are fine. I have had one QSFP+ optic go bad.
On Mon, Feb 18, 2019 at 07:47:10PM +0000, Brian R wrote:
Samir,
I have purchased over a thousand SFPs from Fiber Store. I can recall less than 5 having problems when we received them (not all even DOA) and I know less than 10 dead even after deployment. Some we have ad running for 4+ years. We have done very little with their SFP+ equipment, really only testing and a few lower priority links. The only downside to the SFPs that we found was the variance of power. Say an Adtran, Cisco, Juniper, HP SFP is rated from -3dB to -8 db (all units I have used them with), the equivalent FS direct SFP we have seen as hot as 3dB and as weak as -15dB. These extremes are fairly rare but we have still seen them. Distribution (approximate): 80% SM single fiber SFPs (mostly 10km - 40km, some 60km & 80km) 7% 1Gb Copper 5% MM SFPs 5% SM dual fiber SFPs 3% others (SFP+, GPON, testing, etc)
I have not used them for any DWDM applications and only used them a few times on an older CWDM link that used standard SFPs into a MUX. This was not over great distances (less than 40 miles). With WDM SFP power consistency was important so we did not play much with it, granted most of the SFPs I am purchasing are in the $10-$25 range so take the extremes with a grain of salt.
Their sales has always been very responsive and helpful. The support/engineering, the few times I worked with them, were helpful but the language barrier was harder here.
Brian
________________________________ From: NANOG <nanog-bounces@nanog.org> on behalf of Samir Rana <samir.rana@cybera.ca> Sent: Sunday, February 17, 2019 12:42 PM To: nanog@nanog.org Subject: fs.com dwdm equipment
Hello All,
Does anybody have experience with fs.com<http://fs.com dwdm equipment in their production environment? Are you they working without any issue? How's their warranty support if the issue arises?
Thanks in advance for all the answers and help.
-- Airwire Ltd. - Ag Nascadh Pobail an Iarthair http://www.airwire.ie Phone: 091-395 000 Registered Office: Moy, Kinvara, Co. Galway, 091-395 000 - Registered in Ireland No. 508961
participants (10)
-
Aaron Wendel
-
Anderson, Charles R
-
Brian R
-
Chris Gross
-
David S.
-
Martin List-Petersen
-
Mel Beckman
-
Michel Blais
-
Mike Hammett
-
Samir Rana