Hi Karim! I think that Huawei S5720-EI can serve your needs. Best Regards, João Butzke Em 12/12/2017 12:52, K MEKKAOUI escreveu:

Also has to support features for monitoring and security like traffic per IP, attacks mitigation, etc.

KARIM M. MEKTEL INC. Tél. : 1(855) 563-5835 poste 404 www.mektel.ca

-----Original Message----- From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of K MEKKAOUI Sent: December 12, 2017 9:47 AM To: nanog@nanog.org Subject: Switch/Router

Hi

I am looking for a router preferably (or switch) with the following specs:

1- Carrier grade

2- Dual power supply

3- 1RU

4- Gig and 10Gig interfaces.

5- Does support protocols like BGP, etc.

Any recommendation please? Your help will be appreciated.

Thank you

KARIM M.

MEKTEL INC.

Tél. : 1(855) 563-5835 poste 404

www.mektel.ca

Hi Karim, If 1 x RU is a must have, then you might want to look at Cisco ASR1001-X, it comes with 6 x GigE and 2 x 10GE. It does have throughput limitation, check out the datasheet to ensure it meets your bandwidth requirements. Alternatively, the ASR9001 as suggested by Erik is a good entry level, multipurpose / carrier grade router which comes in 2RU form factor. Cheers Ahad On Wed, Dec 13, 2017 at 3:46 AM, Erik Sundberg <ESundberg@nitelusa.com> wrote:

Cisco ASR9001 - https://www.cisco.com/c/en/us/products/collateral/routers/ asr-9001-router/data_sheet_c78-685687.html

They are also coming out with a Cisco ASR9901 shortly, I would talk to cisco rep about this.

-----Original Message----- From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of João Butzke Sent: Tuesday, December 12, 2017 9:42 AM To: nanog@nanog.org Subject: Re: Switch/Router

Hi Karim!

I think that Huawei S5720-EI can serve your needs.

Best Regards, João Butzke

Em 12/12/2017 12:52, K MEKKAOUI escreveu:

...

Also has to support features for monitoring and security like traffic per IP, attacks mitigation, etc.

KARIM M. MEKTEL INC. Tél. : 1(855) 563-5835 poste 404 www.mektel.ca

-----Original Message----- From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of K MEKKAOUI Sent: December 12, 2017 9:47 AM To: nanog@nanog.org Subject: Switch/Router

Hi

I am looking for a router preferably (or switch) with the following specs:

1- Carrier grade

2- Dual power supply

3- 1RU

4- Gig and 10Gig interfaces.

5- Does support protocols like BGP, etc.

Any recommendation please? Your help will be appreciated.

Thank you

KARIM M.

MEKTEL INC.

Tél. : 1(855) 563-5835 poste 404

www.mektel.ca

What are those limitations? I started to be afraid from those, because just hit recently nasty hash collision issue with EX4550, with declared 32k mac's it badly choked on 28k macs, and even magic "mac-lookup-length" didn't helped. I'm considering EX4600, but afraid from it and that possibly other juniper models have hash collision issues too. (As said on KB32325, affected models EX3200, EX3300, EX4200, EX4500, EX4550, and EX6210 have 8192 hash table FDB entries, but it might be outdated) And till now vendor didn't make troubleshooting of this problem easier, when you upgrade from 12.x to 15.x, you get dead RE hitting load average 30+, and you can't even ssh to switch. On 2017-12-12 17:37, Chuck Anderson wrote:

Juniper MX150, except only single PS. But they are cheap enough you could buy two. Upside: most of the MX feature set is available because it is vMX (software) inside.

QFX5110 is more expensive but has more ports and dual PS. Downside: Broadcom chipset limitations.

On Tue, Dec 12, 2017 at 09:47:17AM -0500, K MEKKAOUI wrote:

...

Hi

I am looking for a router preferably (or switch) with the following specs:

1- Carrier grade

2- Dual power supply

3- 1RU

4- Gig and 10Gig interfaces.

5- Does support protocols like BGP, etc.

Any recommendation please? Your help will be appreciated.