I haven't tried to do anything like this on ours. Getting a copy of the juniper qfx mib would be a good start. Kody Vicknair Network Engineer [cid:image9d67f5.JPG@a30b92f4.4698f933] <http://www.rtconline.com> Tel: 985.536.1214 Fax: 985.536.0300 Email: kvicknair@reservetele.com Web: www.rtconline.com Reserve Telecommunications 100 RTC Dr Reserve, LA 70084 Disclaimer: The information transmitted, including attachments, is intended only for the person(s) or entity to which it is addressed and may contain confidential and/or privileged material which should not disseminate, distribute or be copied. Please notify Kody Vicknair immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Kody Vicknair therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. On Feb 22, 2017 3:34 AM, Stanislaw <me@nek0.net> wrote: Hi everybody, Is it possible to obtain switched traffic statistics in a port+vlan aspect via SNMP on Juniper QFX switches? For example, Extreme switches have a 'vlan monitor' feature: configure ports all monitor vlan <vlan_name> then its counters are available by OID .1.3.6.1.4.1.1916.1.2.8.2.1.8 and .1.3.6.1.4.1.1916.1.2.8.2.1.7 Does anyone know if Juniper has a similar feature?