Two observations concerning the quick circuit question. First, yes, T3s are definitely full duplex in nature. The only time anything common is used is when the same strand of fiber is used in a WDM mode, with one lambda supporting the east-west direction, while another lambda supports the west- east direction. But even here, there is no interaction taking place between the two paths. Secondly, if the line is suspected as being the cause of a problem, tests should be performed in the absence of end user data, simply to eliminate the line or tag it as the problem. Testing should take place using bit-error test sets that employ quasi-random and other forms of continuous data streams, instead. In this manner no questions can arise as to ack-nacks or circumstances surrounding download- upload conflicts and windowing considerations. Finally, "dsx" does not stand for full duplex, as someone mentioned. "FDX" stands for full duplex. DSX-n is an abbreviation that stands for Digital Cross-Connect at the n level, which should not to be confused with the electronic time-slot- interchange kinds of disgital cross-connects, known also as DACSes, but rather the physical patch panel type of cross-connects we're all familiar with. A DSX-1 is a twisted pair demarcation point for a DS-1 or T1 line. A DSX-3 is a digital cross-connect for a DS-3 or T3. Etc. Frank On Tue, 6 Jul 2004 13:21 , 'Williams, Jeff' <jwilliams3@tiaa-cref.org> sent:
You might find what you're looking for at acterna.com/global/technical_resources/index_gbl.html
They're the result of the TTC/ WWG merger.
Jeff
-----Original Message----- From: owner-nanog@merit.edu [owner-nanog@merit.edu','','','')">owner-
Scott Weeks Sent: Tuesday, July 06, 2004 1:13 PM To: nanog@merit.edu Subject: Re: Quick circuit question.
On Tue, 6 Jul 2004, Drew Weaver wrote:
: We have 1 DS-3, that if we get close to 45Mbps IN/OUT the other : direction will be completely unusable. We have another DS3, that we have : seen doing 45Mbps IN, and 15Mbps Out at the same time. This is going to : sound dumb, but is duplex a consideration with lines of these types? I : thought you could do either 45Mbps in, 45Mbps out, or a mix of both, not : 45Mbps In, and 45Mbps out at the same time (90mbps).. : : I couldn't find this exact info on the net anywhere.
Anyone happen to know of where TTC's online library went a few years ago after they merged with someone? (I've forgotten whom) There was a great deal on T1s, T3s, etc. I have hard copies at home, but it'd sure be nice to get some online copies, if they still exist.
scott
This message, including any attachments, contains confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, please contact sender immediately by reply e-mail and destroy all copies. You are hereby notified that any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly
nanog@merit.edu] On Behalf Of prohibited.
TIAA-CREF
Date: Tue, 6 Jul 2004 14:45:44 -0500 From: frank@dti...
Finally, "dsx" does not stand for full duplex, as someone
DSx = DS0/DS1/DS3 (using "x" as wildcard). Not to be confused with uppercase "X". Eddy -- EverQuick Internet - http://www.everquick.net/ A division of Brotsman & Dreger, Inc. - http://www.brotsman.com/ Bandwidth, consulting, e-commerce, hosting, and network building Phone: +1 785 865 5885 Lawrence and [inter]national Phone: +1 316 794 8922 Wichita _________________________________________________________________ DO NOT send mail to the following addresses: davidc@brics.com -*- jfconmaapaq@intc.net -*- sam@everquick.net Sending mail to spambait addresses is a great way to get blocked.
participants (2)
-
Edward B. Dreger
-
frank@dticonsulting.com