Re: My yearly post about environmental monitoring devices
Sorry Alex, but I think you are barking up the wrong tree.
When you add Ethernet as a requirement then you are asking for an I/O interface that is more complex
Ethernet is cheap and trivial, drop some code in one of these (cpu is built into the rj45 socket) http://www.lantronix.com/device-networking/embedded-device-servers/xport.htm... talk ibutton on the serial port and you're done.
and more expensive than the basic temp/hum recorder on the PIC.
Ethernet or don't bother. Serial is so last century. brandon
On Thu, 2 Dec 2004, Brandon Butterworth wrote:
Ethernet is cheap and trivial, drop some code in one of these (cpu is built into the rj45 socket)
http://www.lantronix.com/device-networking/embedded-device-servers/xport.htm...
Cheap is relative. These are showing about $50 each, Considering your average MCU is under $10, and smaller ones under $5, this can be equal to or more than the rest of your device. ========================================================== Chris Candreva -- chris@westnet.com -- (914) 967-7816 WestNet Internet Services of Westchester http://www.westnet.com/
participants (2)
-
Brandon Butterworth -
Christopher X. Candreva