In article <cistron.20050429230504.GH696@overlord.e-gerbil.net>, Richard A Steenbergen <ras@e-gerbil.net> wrote:
On Fri, Apr 29, 2005 at 05:20:21PM -0400, Peering wrote:
All,
Is there something out there (other than a router) that will convert from OC3c to Gig-E? Feel free to answer offline, don't want to fill everyone's inbox at once :)
If you are looking for something that will actually convert native ethernet frames to native sonet frames, you are pretty much SOL.
If you have an OC3 circuit and just want to see GigE on both sides, use two RIC-155GE boxes - one on each side. http://www.rad.com/Article/0,6583,21840-GbE_over_STM-1_OC-3_Intelligent_Conv... "The RIC-155GE is an intelligent converter enabling simple, efficient and cost-effective bridging of Gigabit Ethernet over STM-1/OC-3 lines." I have no idea how well this works or what the costs are .. Mike.
On Sat, Apr 30, 2005 at 01:45:24AM +0000, Miquel van Smoorenburg wrote:
In article <cistron.20050429230504.GH696@overlord.e-gerbil.net>, Richard A Steenbergen <ras@e-gerbil.net> wrote:
On Fri, Apr 29, 2005 at 05:20:21PM -0400, Peering wrote:
All,
Is there something out there (other than a router) that will convert from OC3c to Gig-E? Feel free to answer offline, don't want to fill everyone's inbox at once :)
If you are looking for something that will actually convert native ethernet frames to native sonet frames, you are pretty much SOL.
If you have an OC3 circuit and just want to see GigE on both sides, use two RIC-155GE boxes - one on each side.
http://www.rad.com/Article/0,6583,21840-GbE_over_STM-1_OC-3_Intelligent_Conv...
"The RIC-155GE is an intelligent converter enabling simple, efficient and cost-effective bridging of Gigabit Ethernet over STM-1/OC-3 lines."
I have no idea how well this works or what the costs are ..
Well, except that it actually does nothing of the sort. This is just another ethernet over sonet box, it takes the whole ethernet frame and slaps it inside a sonet frame for transport over a sonet network. If you want to transport ethernet services over sonet, for example to bridge two network networks via a traditional telco circuit, this is a reasonable way to do it. However, this is in no way a "converter", since it requires a matching box (or something with similar functionality) on the other end to pop off the sonet frame and hand off the original ethernet frame to the client side interface. -- Richard A Steenbergen <ras@e-gerbil.net> http://www.e-gerbil.net/ras GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)
participants (2)
-
Miquel van Smoorenburg -
Richard A Steenbergen