Change "aggregate" to "advisory" as below. Steve -------

Date: Mon, 06 Nov 1995 18:43:22 -0500 From: Steve Heimlich <heimlich@kingbee.ans.net> To: nanog@merit.edu Subject: AS690 policy configuration changes

All,

Starting with Friday morning's config run, AS690 will pick up any route listed in various routing registries, including both those routes with advisories and those routes without advisories.

ANS customers will not be affected by this change.

Routes without advisories will be examined for origin AS and will inherit the most popular policy currently used for that AS. For example, if a route for 147.225/16 (origin AS1660) were listed without an advisory, we would configure ourselves to listen for 147.225/16 in the same way that we listen to most other AS1660 routes (only from AS 1324 in this case).

If a route is registered in an AS for which we don't have existing policy, it will not be routed. In the example above, if 147.225/16 were registered without an aggregate, and it were the only route ^^^^^^^^^ This should be "advisory."

[...]