Folks, We are now up and running at the LINX (London Internet Exchange) and would like to invite folks at the LINX to peer with route-views. You can get to the open CLI via 'telnet route-views.linx.routeviews.org' (of course, nothing much there yet). Please contact us at help@routeviews.org if you would like to contribute your view. In addition, I've included our standard boilerplate below. Thanks, The Route-Views Team ----- AS : 6447 University of Oregon: route-views : 128.223.60.103 (multi-hop IPv4) route-views2 : 128.223.60.102 (multi-hop IPv4) route-views3 : 128.223.60.108 (multi-hop IPv4) : 2001:468:d01:3c::80df:3c6c (multi-hop IPv6) route-views6 : 128.223.60.194 (v6 peering only) : 2001:468:d01:3c::80df:3c6d (multi-hop IPv6) route-views.wide: 202.249.2.166 (WIDE peering only) route-views.paix: 198.32.176.5 (PAIX peering only) route-views.linx: 195.66.225.222 (LINX peering only) route-views.linx: 195.66.227.222 (LINX peering only) - Route-views does not announce _any_ prefixes. - We would like to receive a full default-free table from all sessions with all peers. - In order for our multihop-ebgp sessions to survive transient network failures, we would like to increase the BGP hold-timer to 10 minutes (600 seconds). A value of zero does not work for several cases. If possible, peers should set their hold-timer to the max value which allows Route-Views to change without your intervention. cisco: neighbor 128.223.60.x timers 21845 65535 juniper: set protocols bgp group routeviews hold-time 65535 - Please send your communities. If possible, please describe the communities you advertise. - Please provide your NOC's email and telephone number(s). - Route information from these sessions is made publicly available in two forms: manufacturer-style "show ip bgp" and MRT format. -- Short questionnaire. These data will only be shared with researchers. - What type of router(s) are we peering with? - We have a (closed) mail list which we use to announce outages to our peers. If you would like your noc added to this list, please let us know. Thanks!