Carrier-grade DDoS Attack mitigation appliance
Have anyone tried any DDoS attack mitigation appliance rather than Arbor PeakFlow TMS? I need it to be carrier-grade in terms of capacity and redundancy, and as far as I know, Arbor is the only product in the market which offers a "clean pipe" volume of traffic, so if the DDoS attack volume is, for example, 1Tbps, they will grant you for example 50Gbps of clean traffic. Anyway, I'm open to other suggestions, and open-source products that can do the same purpose, we have network development team that can work on this. Thanks. -- Mohamed Kamal Core Network Sr. Engineer
Hi, A lot of new vendors have entered the DDoS attack prevention market other than Arbor, I've seen carrier grade devices made by Huawei, NSFocus, RioRey and many others. If you're looking at something software based, I've used Andrisoft WanGuard and would recommend it. Ammar.
On 8 Dec 2014, at 12:09 am, Mohamed Kamal <mkamal@noor.net> wrote:
Have anyone tried any DDoS attack mitigation appliance rather than Arbor PeakFlow TMS? I need it to be carrier-grade in terms of capacity and redundancy, and as far as I know, Arbor is the only product in the market which offers a "clean pipe" volume of traffic, so if the DDoS attack volume is, for example, 1Tbps, they will grant you for example 50Gbps of clean traffic.
Anyway, I'm open to other suggestions, and open-source products that can do the same purpose, we have network development team that can work on this.
Thanks.
-- Mohamed Kamal Core Network Sr. Engineer
I've heard good things about the A10 Networks appliances. I have not used them personally, but do use their ADC appliances and they do work well. Jordan Medlen Network Engineer Bisk Education Sent from my iPhone
On Dec 7, 2014, at 15:12, Mohamed Kamal <mkamal@noor.net> wrote:
Have anyone tried any DDoS attack mitigation appliance rather than Arbor PeakFlow TMS? I need it to be carrier-grade in terms of capacity and redundancy, and as far as I know, Arbor is the only product in the market which offers a "clean pipe" volume of traffic, so if the DDoS attack volume is, for example, 1Tbps, they will grant you for example 50Gbps of clean traffic.
Anyway, I'm open to other suggestions, and open-source products that can do the same purpose, we have network development team that can work on this.
Thanks.
-- Mohamed Kamal Core Network Sr. Engineer
On Dec 7, 2014, at 12:10 PM, Mohamed Kamal <mkamal@noor.net> wrote: so if the DDoS attack volume is, for example, 1Tbps, they will grant you for example 50Gbps of clean traffic. Please feel free to contact me off-list if I can assist, as it seems you've been provided with incorrect information. ------------------------------------ Roland Dobbins <rdobbins@arbor.net>
Does anyone on list currently use Peakflow SP from Arbor with TMS, and is it truly a carrier grade DDoS detection and mitigation platform? Anyone have any experience with Plixir? Tony McKay Dir. Of Network Operations Office: 870.336.3449 Mobile: 870.243.0058 -The boundary to your comfort zone fades a little each time you cross it. Raise your limits by pushing them. This electronic mail transmission may contain confidential or privileged information. If you believe that you have received this message in error, please notify the sender by reply transmission and delete the message without copying or disclosing it. -----Original Message----- From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of Mohamed Kamal Sent: Sunday, December 07, 2014 2:10 PM To: nanog Subject: Carrier-grade DDoS Attack mitigation appliance Have anyone tried any DDoS attack mitigation appliance rather than Arbor PeakFlow TMS? I need it to be carrier-grade in terms of capacity and redundancy, and as far as I know, Arbor is the only product in the market which offers a "clean pipe" volume of traffic, so if the DDoS attack volume is, for example, 1Tbps, they will grant you for example 50Gbps of clean traffic. Anyway, I'm open to other suggestions, and open-source products that can do the same purpose, we have network development team that can work on this. Thanks. -- Mohamed Kamal Core Network Sr. Engineer
Hi, We’re currently running the Arbor Peakflow SP with the TMS and it works very well for us. Best Regards, Ammar Zuberi FastReturn, Inc Direct Line: +971 50 394 7299 Email: ammar@fastreturn.net This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received it by mistake, please let us know by e-mail reply and delete it from your system; you may not copy this message or disclose its contents to anyone. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. Finally, the recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.
On Dec 8, 2014, at 10:53 PM, Tony McKay <Tony.McKay@RitterCommunications.com> wrote:
Does anyone on list currently use Peakflow SP from Arbor with TMS, and is it truly a carrier grade DDoS detection and mitigation platform? Anyone have any experience with Plixir?
Tony McKay Dir. Of Network Operations Office: 870.336.3449 Mobile: 870.243.0058 -The boundary to your comfort zone fades a little each time you cross it. Raise your limits by pushing them.
This electronic mail transmission may contain confidential or privileged information. If you believe that you have received this message in error, please notify the sender by reply transmission and delete the message without copying or disclosing it.
-----Original Message----- From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of Mohamed Kamal Sent: Sunday, December 07, 2014 2:10 PM To: nanog Subject: Carrier-grade DDoS Attack mitigation appliance
Have anyone tried any DDoS attack mitigation appliance rather than Arbor PeakFlow TMS? I need it to be carrier-grade in terms of capacity and redundancy, and as far as I know, Arbor is the only product in the market which offers a "clean pipe" volume of traffic, so if the DDoS attack volume is, for example, 1Tbps, they will grant you for example 50Gbps of clean traffic.
Anyway, I'm open to other suggestions, and open-source products that can do the same purpose, we have network development team that can work on this.
Thanks.
-- Mohamed Kamal Core Network Sr. Engineer
We also evaluating another appliance to put in place of Arbor, their "support" outside USA its a joke. On Mon, Dec 8, 2014 at 6:17 PM, Ammar Zuberi <ammar@fastreturn.net> wrote:
Hi,
We're currently running the Arbor Peakflow SP with the TMS and it works very well for us.
Best Regards,
Ammar Zuberi FastReturn, Inc
Direct Line: +971 50 394 7299 Email: ammar@fastreturn.net
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received it by mistake, please let us know by e-mail reply and delete it from your system; you may not copy this message or disclose its contents to anyone. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. Finally, the recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.
On Dec 8, 2014, at 10:53 PM, Tony McKay <Tony.McKay@RitterCommunications.com> wrote:
Does anyone on list currently use Peakflow SP from Arbor with TMS, and is it truly a carrier grade DDoS detection and mitigation platform? Anyone have any experience with Plixir?
Tony McKay Dir. Of Network Operations Office: 870.336.3449 Mobile: 870.243.0058 -The boundary to your comfort zone fades a little each time you cross it. Raise your limits by pushing them.
This electronic mail transmission may contain confidential or privileged information. If you believe that you have received this message in error, please notify the sender by reply transmission and delete the message without copying or disclosing it.
-----Original Message----- From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of Mohamed Kamal Sent: Sunday, December 07, 2014 2:10 PM To: nanog Subject: Carrier-grade DDoS Attack mitigation appliance
Have anyone tried any DDoS attack mitigation appliance rather than Arbor PeakFlow TMS? I need it to be carrier-grade in terms of capacity and redundancy, and as far as I know, Arbor is the only product in the market which offers a "clean pipe" volume of traffic, so if the DDoS attack volume is, for example, 1Tbps, they will grant you for example 50Gbps of clean traffic.
Anyway, I'm open to other suggestions, and open-source products that can do the same purpose, we have network development team that can work on this.
Thanks.
-- Mohamed Kamal Core Network Sr. Engineer
-- Grato, Tozo
Switch to Nemo. -----Original Message----- From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of J. Tozo Sent: Monday, December 08, 2014 3:26 PM Cc: nanog Subject: Re: Carrier-grade DDoS Attack mitigation appliance We also evaluating another appliance to put in place of Arbor, their "support" outside USA its a joke. On Mon, Dec 8, 2014 at 6:17 PM, Ammar Zuberi <ammar@fastreturn.net> wrote:
Hi,
We're currently running the Arbor Peakflow SP with the TMS and it works very well for us.
Best Regards,
Ammar Zuberi FastReturn, Inc
Direct Line: +971 50 394 7299 Email: ammar@fastreturn.net
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received it by mistake, please let us know by e-mail reply and delete it from your system; you may not copy this message or disclose its contents to anyone. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. Finally, the recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.
On Dec 8, 2014, at 10:53 PM, Tony McKay <Tony.McKay@RitterCommunications.com> wrote:
Does anyone on list currently use Peakflow SP from Arbor with TMS, and is it truly a carrier grade DDoS detection and mitigation platform? Anyone have any experience with Plixir?
Tony McKay Dir. Of Network Operations Office: 870.336.3449 Mobile: 870.243.0058 -The boundary to your comfort zone fades a little each time you cross it. Raise your limits by pushing them.
This electronic mail transmission may contain confidential or privileged information. If you believe that you have received this message in error, please notify the sender by reply transmission and delete the message without copying or disclosing it.
-----Original Message----- From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of Mohamed Kamal Sent: Sunday, December 07, 2014 2:10 PM To: nanog Subject: Carrier-grade DDoS Attack mitigation appliance
Have anyone tried any DDoS attack mitigation appliance rather than Arbor PeakFlow TMS? I need it to be carrier-grade in terms of capacity and redundancy, and as far as I know, Arbor is the only product in the market which offers a "clean pipe" volume of traffic, so if the DDoS attack volume is, for example, 1Tbps, they will grant you for example 50Gbps of clean traffic.
Anyway, I'm open to other suggestions, and open-source products that can do the same purpose, we have network development team that can work on this.
Thanks.
-- Mohamed Kamal Core Network Sr. Engineer
-- Grato, Tozo ________________________________ The information transmitted is intended only for the person or entity to which it is addressed and may contain proprietary, confidential and/or legally privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from all computers. ________________________________
Dear All We use a combination of NSFOCUS hardware (ADS, ADS-m and NTA along with A10 Hardware) All of which I highly recommend ! Kindest Regards James Braunegg P: 1300 769 972 | M: 0488 997 207 | D: (03) 9751 7616 E: james.braunegg@micron21.com<mailto:james.braunegg@micron21.com> | ABN: 12 109 977 666 W: www.micron21.com/ddos-protection<http://www.micron21.com/ddos-protection> T: @micron21 [Description: Description: Description: Description: M21.jpg] This message is intended for the addressee named above. It may contain privileged or confidential information. If you are not the intended recipient of this message you must not use, copy, distribute or disclose it to anyone other than the addressee. If you have received this message in error please return the message to the sender by replying to it and then delete the message from your computer. -----Original Message----- From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of Parrish, Luke Sent: Wednesday, December 10, 2014 8:08 AM To: J. Tozo Cc: nanog Subject: RE: Carrier-grade DDoS Attack mitigation appliance Switch to Nemo. -----Original Message----- From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of J. Tozo Sent: Monday, December 08, 2014 3:26 PM Cc: nanog Subject: Re: Carrier-grade DDoS Attack mitigation appliance We also evaluating another appliance to put in place of Arbor, their "support" outside USA its a joke. On Mon, Dec 8, 2014 at 6:17 PM, Ammar Zuberi <ammar@fastreturn.net> wrote:
Hi,
We're currently running the Arbor Peakflow SP with the TMS and it
works very well for us.
Best Regards,
Ammar Zuberi
FastReturn, Inc
Direct Line: +971 50 394 7299
Email: ammar@fastreturn.net
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they are addressed.
If you have received it by mistake, please let us know by e-mail reply
and delete it from your system; you may not copy this message or
disclose its contents to anyone. Please note that any views or
opinions presented in this email are solely those of the author and do
not necessarily represent those of the company. Finally, the recipient
should check this email and any attachments for the presence of
viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.
On Dec 8, 2014, at 10:53 PM, Tony McKay
<Tony.McKay@RitterCommunications.com> wrote:
Does anyone on list currently use Peakflow SP from Arbor with TMS,
and
is it truly a carrier grade DDoS detection and mitigation platform?
Anyone have any experience with Plixir?
Tony McKay
Dir. Of Network Operations
Office: 870.336.3449
Mobile: 870.243.0058
-The boundary to your comfort zone fades a little each time you
cross
it. Raise your limits by pushing them.
This electronic mail transmission may contain confidential or
privileged
information. If you believe that you have received this message in
error, please notify the sender by reply transmission and delete the
message without copying or disclosing it.
-----Original Message-----
From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of Mohamed
Kamal
Sent: Sunday, December 07, 2014 2:10 PM
To: nanog
Subject: Carrier-grade DDoS Attack mitigation appliance
Have anyone tried any DDoS attack mitigation appliance rather than
Arbor
PeakFlow TMS? I need it to be carrier-grade in terms of capacity and
redundancy, and as far as I know, Arbor is the only product in the
market which offers a "clean pipe" volume of traffic, so if the DDoS
attack volume is, for example, 1Tbps, they will grant you for example
50Gbps of clean traffic.
Anyway, I'm open to other suggestions, and open-source products that
can
do the same purpose, we have network development team that can work on this.
Thanks.
--
Mohamed Kamal
Core Network Sr. Engineer
-- Grato, Tozo ________________________________ The information transmitted is intended only for the person or entity to which it is addressed and may contain proprietary, confidential and/or legally privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from all computers. ________________________________
What about DDOS protection as a service? is that something that is being offered by more than a few vendors? I know of only one that exists through a friend. They basically start advertising your bgp routes, filter out the junk, and send the good traffic back to you. On Wed, Dec 10, 2014 at 8:08 AM, James Braunegg <james.braunegg@micron21.com
wrote:
Dear All
We use a combination of NSFOCUS hardware (ADS, ADS-m and NTA along with A10 Hardware)
All of which I highly recommend !
Kindest Regards
James Braunegg P: 1300 769 972 | M: 0488 997 207 | D: (03) 9751 7616 E: james.braunegg@micron21.com<mailto:james.braunegg@micron21.com> | ABN: 12 109 977 666 W: www.micron21.com/ddos-protection< http://www.micron21.com/ddos-protection> T: @micron21
[Description: Description: Description: Description: M21.jpg] This message is intended for the addressee named above. It may contain privileged or confidential information. If you are not the intended recipient of this message you must not use, copy, distribute or disclose it to anyone other than the addressee. If you have received this message in error please return the message to the sender by replying to it and then delete the message from your computer.
-----Original Message----- From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of Parrish, Luke Sent: Wednesday, December 10, 2014 8:08 AM To: J. Tozo Cc: nanog Subject: RE: Carrier-grade DDoS Attack mitigation appliance
Switch to Nemo.
-----Original Message-----
From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of J. Tozo
Sent: Monday, December 08, 2014 3:26 PM
Cc: nanog
Subject: Re: Carrier-grade DDoS Attack mitigation appliance
We also evaluating another appliance to put in place of Arbor, their "support" outside USA its a joke.
On Mon, Dec 8, 2014 at 6:17 PM, Ammar Zuberi <ammar@fastreturn.net> wrote:
Hi,
We're currently running the Arbor Peakflow SP with the TMS and it
works very well for us.
Best Regards,
Ammar Zuberi
FastReturn, Inc
Direct Line: +971 50 394 7299
Email: ammar@fastreturn.net
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they are addressed.
If you have received it by mistake, please let us know by e-mail reply
and delete it from your system; you may not copy this message or
disclose its contents to anyone. Please note that any views or
opinions presented in this email are solely those of the author and do
not necessarily represent those of the company. Finally, the recipient
should check this email and any attachments for the presence of
viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.
On Dec 8, 2014, at 10:53 PM, Tony McKay
<Tony.McKay@RitterCommunications.com> wrote:
Does anyone on list currently use Peakflow SP from Arbor with TMS,
and
is it truly a carrier grade DDoS detection and mitigation platform?
Anyone have any experience with Plixir?
Tony McKay
Dir. Of Network Operations
Office: 870.336.3449
Mobile: 870.243.0058
-The boundary to your comfort zone fades a little each time you
cross
it. Raise your limits by pushing them.
This electronic mail transmission may contain confidential or
privileged
information. If you believe that you have received this message in
error, please notify the sender by reply transmission and delete the
message without copying or disclosing it.
-----Original Message-----
From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of Mohamed
Kamal
Sent: Sunday, December 07, 2014 2:10 PM
To: nanog
Subject: Carrier-grade DDoS Attack mitigation appliance
Have anyone tried any DDoS attack mitigation appliance rather than
Arbor
PeakFlow TMS? I need it to be carrier-grade in terms of capacity and
redundancy, and as far as I know, Arbor is the only product in the
market which offers a "clean pipe" volume of traffic, so if the DDoS
attack volume is, for example, 1Tbps, they will grant you for example
50Gbps of clean traffic.
Anyway, I'm open to other suggestions, and open-source products that
can
do the same purpose, we have network development team that can work on this.
Thanks.
--
Mohamed Kamal
Core Network Sr. Engineer
--
Grato,
Tozo
________________________________
The information transmitted is intended only for the person or entity to which it is addressed and may contain proprietary, confidential and/or legally privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from all computers.
________________________________
Tons of such companies exist; BlackLotus/Staminus/Prolexic/Voxility to name a few within the US. Service provided is usually based on proprietary algorithms that may or may not do what you want it to do, though. On 12/11/2014 10:39 AM, Javier J wrote:
What about DDOS protection as a service? is that something that is being offered by more than a few vendors? I know of only one that exists through a friend.
They basically start advertising your bgp routes, filter out the junk, and send the good traffic back to you.
On Wed, Dec 10, 2014 at 8:08 AM, James Braunegg <james.braunegg@micron21.com
wrote: Dear All
We use a combination of NSFOCUS hardware (ADS, ADS-m and NTA along with A10 Hardware)
All of which I highly recommend !
Kindest Regards
James Braunegg P: 1300 769 972 | M: 0488 997 207 | D: (03) 9751 7616 E: james.braunegg@micron21.com<mailto:james.braunegg@micron21.com> | ABN: 12 109 977 666 W: www.micron21.com/ddos-protection< http://www.micron21.com/ddos-protection> T: @micron21
[Description: Description: Description: Description: M21.jpg] This message is intended for the addressee named above. It may contain privileged or confidential information. If you are not the intended recipient of this message you must not use, copy, distribute or disclose it to anyone other than the addressee. If you have received this message in error please return the message to the sender by replying to it and then delete the message from your computer.
-----Original Message----- From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of Parrish, Luke Sent: Wednesday, December 10, 2014 8:08 AM To: J. Tozo Cc: nanog Subject: RE: Carrier-grade DDoS Attack mitigation appliance
Switch to Nemo.
-----Original Message-----
From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of J. Tozo
Sent: Monday, December 08, 2014 3:26 PM
Cc: nanog
Subject: Re: Carrier-grade DDoS Attack mitigation appliance
We also evaluating another appliance to put in place of Arbor, their "support" outside USA its a joke.
On Mon, Dec 8, 2014 at 6:17 PM, Ammar Zuberi <ammar@fastreturn.net> wrote:
Hi, We're currently running the Arbor Peakflow SP with the TMS and it works very well for us. Best Regards, Ammar Zuberi FastReturn, Inc Direct Line: +971 50 394 7299 Email: ammar@fastreturn.net This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed.
If you have received it by mistake, please let us know by e-mail reply and delete it from your system; you may not copy this message or disclose its contents to anyone. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. Finally, the recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.
On Dec 8, 2014, at 10:53 PM, Tony McKay <Tony.McKay@RitterCommunications.com> wrote: Does anyone on list currently use Peakflow SP from Arbor with TMS, and is it truly a carrier grade DDoS detection and mitigation platform? Anyone have any experience with Plixir? Tony McKay Dir. Of Network Operations Office: 870.336.3449 Mobile: 870.243.0058 -The boundary to your comfort zone fades a little each time you cross it. Raise your limits by pushing them. This electronic mail transmission may contain confidential or privileged information. If you believe that you have received this message in error, please notify the sender by reply transmission and delete the message without copying or disclosing it. -----Original Message----- From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of Mohamed Kamal Sent: Sunday, December 07, 2014 2:10 PM To: nanog Subject: Carrier-grade DDoS Attack mitigation appliance Have anyone tried any DDoS attack mitigation appliance rather than Arbor PeakFlow TMS? I need it to be carrier-grade in terms of capacity and redundancy, and as far as I know, Arbor is the only product in the market which offers a "clean pipe" volume of traffic, so if the DDoS attack volume is, for example, 1Tbps, they will grant you for example 50Gbps of clean traffic. Anyway, I'm open to other suggestions, and open-source products that can do the same purpose, we have network development team that can work on this.
Thanks. -- Mohamed Kamal Core Network Sr. Engineer
--
Grato,
Tozo
________________________________
The information transmitted is intended only for the person or entity to which it is addressed and may contain proprietary, confidential and/or legally privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from all computers.
________________________________
Does anyone on list currently use Peakflow SP from Arbor with TMS, and is it truly a carrier grade DDoS detection and mitigation platform? Anyone have any experience with Plixir? Peakflow SP with the TMS works quite well. Can be very fast once a
On 12/08/2014 11:53 AM, Tony McKay wrote: threat is discovered, depending on how you set up the mitigation. If you use auto mitigate and anycast BGP announcements, you can get a base mitigation going within seconds. Although it works quite well, it can be a bit pricey. I've seen but not yet played with DefensePro from Radware. I thought they also had premise based unit like Arbor's Pravail but I can't be sure on that. --John
Tony McKay Dir. Of Network Operations Office: 870.336.3449 Mobile: 870.243.0058 -The boundary to your comfort zone fades a little each time you cross it. Raise your limits by pushing them.
This electronic mail transmission may contain confidential or privileged information. If you believe that you have received this message in error, please notify the sender by reply transmission and delete the message without copying or disclosing it.
-----Original Message----- From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of Mohamed Kamal Sent: Sunday, December 07, 2014 2:10 PM To: nanog Subject: Carrier-grade DDoS Attack mitigation appliance
Have anyone tried any DDoS attack mitigation appliance rather than Arbor PeakFlow TMS? I need it to be carrier-grade in terms of capacity and redundancy, and as far as I know, Arbor is the only product in the market which offers a "clean pipe" volume of traffic, so if the DDoS attack volume is, for example, 1Tbps, they will grant you for example 50Gbps of clean traffic.
Anyway, I'm open to other suggestions, and open-source products that can do the same purpose, we have network development team that can work on this.
Thanks.
-- Mohamed Kamal Core Network Sr. Engineer
participants (11)
-
Ammar Zuberi -
J. Tozo -
James Braunegg -
Javier J -
John Schiel -
Jordan Medlen -
Mohamed Kamal -
Parrish, Luke -
Paul S. -
Roland Dobbins -
Tony McKay