Hi, folks Is there anybody use IOS 12.0(7)S version? We got PA-2T3+ card for Cisco 7507, and upgraded its software from 11.2P to 12.0(7)S. After that, suddenly routing didn't work. We use BGP for external connection and OSPF for internal connection. But traffic from OSPF didn't go to outer Internet at all. Is there any factors that I need to adjust? We tried to traceroute from internal network to Cisco 7507, and it was fine. When we tried to traceroute from Cisco 7507 to outer Internet, it was fine. But when we tried to traceroute from internnal network to outer Internet, there was timeout at Cisco 7507. When I use "sh ip route", it looks fine. I don't know why. Please let me know the reason or solution. Thanks in advance. Hyun ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Hyunseog Ryu Network Engineer/Applications Engineering Norlight Telecommunications, Inc. 275 North Corporate Drive Brookfield, WI 53045-5818 Tel. +1.262.792.7965 Fax. +1.262.792.7733
On Mon, 15 Nov 1999, Hyunseog Ryu/Brookfield/Norlight wrote:
Is there anybody use IOS 12.0(7)S version? We got PA-2T3+ card for Cisco 7507, and upgraded its software from 11.2P to 12.0(7)S.
On a similar note, a few weeks ago I upgraded a 7206 from 11.1(25)CC to 11.1(28)CC hoping to use ip verify unicast reverse-path. 11.1(25)CC crashed months ago when I tried that the first time. Supposedly it was fixed in 28. A week after upgrading to 11.1(28)CC, one of our T3's on a PA-T3 card started flapping somewhat regularly. We had the line tested/monitored, and nothing was found. After about a week of that, I downgraded back to 11.1(25)CC. It's been 8 days since the downgrade, and no flaps yet. Is there stable code for the 7206 that supports the PA-T3, PA-2T3, PA-MCT3, CEF, BGP, OSPF, and ip verify unicast reverse-path? Also, we're considering upgrading that router to a 7206VXR and adding a few more T3's to it. It already has 3 (2 fractional, 1 full). Is there stable code for the VXR with support for the above? Is there 11.1CC code that can be run on a VXR, or are we forced to use 12.0? ---------------------------------------------------------------------- Jon Lewis *jlewis@lewis.org*| Spammers will be winnuked or System Administrator | nestea'd...whatever it takes Atlantic Net | to get the job done. _________http://www.lewis.org/~jlewis/pgp for PGP public key__________
Hi, We tried to use 12.0(7)S with (among others) a GEIP module. It worked (with rudimentary routing), apart from that the interfaces didn't want to mount by themselves, but needed a manual "shut, no shut" :( Another Q : Anyone experienced problems going from 11.1(29)CC1 to 12.0(5)T1 ? We've had the following : the router (a 7513) hanging on boot over invalid configuration statements : no ip route-cache optimum (I guess it's an out-dated entry ? Replacement ?) and a atm pvc x x x related statement (I unfortunately doesn't have literally at hand at home) ? Cheers mh
Hi, folks
Is there anybody use IOS 12.0(7)S version? We got PA-2T3+ card for Cisco 7507, and upgraded its software from 11.2P
to
12.0(7)S. After that, suddenly routing didn't work. We use BGP for external connection and OSPF for internal connection. But traffic from OSPF didn't go to outer Internet at all. Is there any factors that I need to adjust? We tried to traceroute from internal network to Cisco 7507, and it was fine. When we tried to traceroute from Cisco 7507 to outer Internet, it was fine. But when we tried to traceroute from internnal network to outer Internet, there was timeout at Cisco 7507. When I use "sh ip route", it looks fine. I don't know why. Please let me know the reason or solution. Thanks in advance.
Hyun
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Hyunseog Ryu Network Engineer/Applications Engineering Norlight Telecommunications, Inc. 275 North Corporate Drive Brookfield, WI 53045-5818 Tel. +1.262.792.7965 Fax. +1.262.792.7733
On Mon, 15 Nov 1999, Michael Hallgren wrote:
atm pvc x x x
related statement (I unfortunately doesn't have literally at hand at home) ?
We had a problem with 12.0(3) (I think it was) saving the wrong atm pvc statements to startup-config which made it unable to bring up the pvcs on boot. We just upgraded to 12.0(7) and it seems to work now. This was on a 7206. Now we just need to figure out why the 7206 wont detect our POS cards we just put in there :/ -- Mikael Abrahamsson email: swmike@swm.pp.se Fax/voicemail: +46 (0) 8-59825186
Hi (or Hej ! ;),
On Mon, 15 Nov 1999, Michael Hallgren wrote:
atm pvc x x x
related statement (I unfortunately doesn't have literally at hand at
home) ?
We had a problem with 12.0(3) (I think it was) saving the wrong atm pvc statements to startup-config which made it unable to bring up the pvcs on boot
Something along the lines that we've experienced then. The routers hung on boot complaining over invalid config. statements.
We just upgraded to 12.0(7) and it seems to work now. This was on a 7206.
Ahh, the .S version. Seemingly OK for us (though not tested on the same - production - box). There was a problem, though... having to 'shut; no shut' the Gig Eth interfaces manually.
Now we just need to figure out why the 7206 wont detect our POS cards we just put in there :/
Will keep you updated on future tests. Thanks Michael
-- Mikael Abrahamsson email: swmike@swm.pp.se Fax/voicemail: +46 (0) 8-59825186
participants (4)
-
Hyunseog Ryu/Brookfield/Norlight -
jlewis＠lewis.org -
Michael Hallgren -
Mikael Abrahamsson