Greg Sowell helps you out here: http://gregsowell.com/?page_id=5771 Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Aug 3, 2020 at 4:19 PM Brendan Carlson <brendan@bcarlsonmedia.com> wrote:

Set up a Vultr instance and you can get a full feed from them for testing. I've done this for a route collector and it worked well.

On Mon, Aug 3, 2020, 13:16 Blažej Krajňák <krajnak@levonet.sk> wrote:

...

Hello,

I'm wondering, if there is any public service I can get full BGP feed from for testing purposes.

I admin multi-homed AS50242 with two default routes for now (fail-over). I'm going to prepare new routing setup with extended validation so reall full BGP feed would be usefull. Yes, I can ask my upstream provider for it, but I don't want to change settings in production setup.

Thanks

Regards, Blažej Krajňák

…or you can do next best thing. Which is use AS 65001 and connect your router to AS 65000 under 94.246.173.181. Please note that’s just test instance, and it has conservative timers (3600/7200) to not overtax CPU. It’s test instance of CSR 1000v running 16.9.5. If there’ll be interest, I can setup similar box with IOS-XR and/or with IPv6. -- Łukasz Bromirski CCIE R&S/SP #15929, CCDE #2012::17, PGP Key ID: 0xFD077F6A

On 5 Aug 2020, at 03:25, Jared Geiger <jared@compuwizz.net> wrote:

You can also launch a VM in your lab https://stubarea51.net/2016/01/21/put-500000-bgp-routes-in-your-lab-network-... <https://stubarea51.net/2016/01/21/put-500000-bgp-routes-in-your-lab-network-download-this-vm-and-become-your-own-upstream-bgp-isp-for-testing/> On Mon, Aug 3, 2020 at 1:42 PM Josh Luthman <josh@imaginenetworksllc.com <mailto:josh@imaginenetworksllc.com>> wrote: Greg Sowell helps you out here:

http://gregsowell.com/?page_id=5771 <http://gregsowell.com/?page_id=5771>

Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373

On Mon, Aug 3, 2020 at 4:19 PM Brendan Carlson <brendan@bcarlsonmedia.com <mailto:brendan@bcarlsonmedia.com>> wrote: Set up a Vultr instance and you can get a full feed from them for testing. I've done this for a route collector and it worked well.

On Mon, Aug 3, 2020, 13:16 Blažej Krajňák <krajnak@levonet.sk <mailto:krajnak@levonet.sk>> wrote: Hello,

I'm wondering, if there is any public service I can get full BGP feed from for testing purposes.

I admin multi-homed AS50242 with two default routes for now (fail-over). I'm going to prepare new routing setup with extended validation so reall full BGP feed would be usefull. Yes, I can ask my upstream provider for it, but I don't want to change settings in production setup.

Thanks

Regards, Blažej Krajňák

Hi Lukasz, your feed is working well. Feed from Poland to me to Slovakia is better than expected :) It's my first live BGP full feed ever so I really appreciate you. Will this instance run for a longer time? btw: - converting RIS data via mrt2exabgp looks to be broken, it's falling on syntax error in source data. With routeviews.org data it's working but exabgp is single-thread (convergence takes some time) and use much more RAM to start with full feed config than I excepcted. - from gregsowell.com I received email with access credentials, however L2TP tunnel establishment is falling due to authentication error - looks like bug Thanks to everyone Blažej Dňa 2020-08-05 20:04 Łukasz Bromirski napísal(a):

Ah, one more thing:

...

On 5 Aug 2020, at 20:01, Łukasz Bromirski <lukasz@bromirski.net> wrote:

…or you can do next best thing. Which is use AS 65001 and connect your router to AS 65000 under 94.246.173.181.

Please note that’s just test instance, and it has conservative timers (3600/7200) to not overtax CPU.

It’s test instance of CSR 1000v running 16.9.5.

If there’ll be interest, I can setup similar box with IOS-XR and/or with IPv6.

This is European feed from Poland, so YMMV, but it has 816,090 prefixes as we speak.

Don’t kill me if it kills your router ;)

— ./

Blazej,

On 5 Aug 2020, at 23:13, Blažej Krajňák <krajnak@levonet.sk> wrote:

Hi Lukasz,

your feed is working well. Feed from Poland to me to Slovakia is better than expected :) It's my first live BGP full feed ever so I really appreciate you. Will this instance run for a longer time?

Yep. I have no reasons to drop it. Right now I have like 5 to 10 sessions in peak, most people come, get feed, reset session couple of times and go away. I’m finishing writing some short ‘howto’ style doc to explain how to use this feed for egress traffic engineering when you have multiple ISPs and no BGP with them. — ./