Hello, Could someone please explain how to boot from the 2nd partition in flash on a cisco 4700? Is it even possible? Do I need to specify something in rommon, in the config, or both? I was only able to get the router to boot (from the first partition) by typing "boot flash: 2". Any assistance would be greatly appreciated. Here is what is in flash- un-named#sh flash System flash directory, partition 1: File Length Name/status 1 2362132 c4500-p-mz_111-11.bin [2362196 bytes used, 1832108 available, 4194304 total] 4096K bytes of processor board System flash (Read/Write) System flash directory, partition 2: File Length Name/status 1 2375940 c4500-p-mz_111-18.bin [2376004 bytes used, 1818300 available, 4194304 total] 4096K bytes of processor board System flash (Read/Write) This is how the config reads- boot system flash c4500-p-mz_111-18.bin boot system flash c4500-p-mz_111-11.bin Thank you, -Dan Dan Caldwell Network Support Engineer dan@agis.net Apex Global Internet Services (AGIS) Network Operations Center - (313)730-5151 Business Office/Sales (313)730-1130 sales@agis.net URL: http://www.agis.net/ If you follow the present day world, you will turn your back on the Way; if you would not turn your back on the Way, do not follow the world. -Takuan Soho.
participants (1)
-
Dan Caldwell