I don't have any GBIC/SPF inserted in it right now, it just turn off whole module. So won't allow me even fpd upgrade. On 25/10/13 14:02, Ray Ludendorff wrote:

It means that you did not purchase a original Cisco GBIC for the interface .. Therefore it will not be TAC supported if you have problems with the interface. There is a command to override this error and still use the interfaces.

Sent from mobile device

...

On Oct 25, 2013, at 11:56, "Nikolay Shopik" <shopik@inblock.ru> wrote:

Hey, anyone had issues with A9K-MPA-20X1GE in ASR9001?

It get disabled for us after 20 seconds finishing initialization, with such message.

%PLATFORM-SCC-2-BAD_ID_HW : Failed Identification Test in 0/130/0 [1/0] The module in 0/130/0 in this router may not be a genuineCisco product.