Hello Stephane - if you search google for VRF aware IPSEC you will find links and relevant information and configs. I did this on older hardware by creating an IPSEC tunnel between 2 routeable loopbacks and creating a GRE tunnel that used the loopbacks and tunnel source and destination. Then place the GRE tunnel in a VRF. Kenny On Fri, Dec 18, 2009 at 11:03 PM, Stephane MAGAND <stmagconsulting@gmail.com

wrote:

Hi

after a first post with 0 answer (very thanks ..) i test a second post for get a small help.

I am search a simple sample of configuration for a cisco 2821 for connect a Ipsec routers ton a MPLS IP VPN Backbone

My cisco 2821 have two interface, one connected at my MPLS network and the second at the Internet.

I create two vrf, one for a site to site and the second for a Remote User Access

anyone have this into a config ? because i never have used Ipsec actually on

cisco.

The site-to-site router are a C1721, and remote user use cisco IPSEC client and i want a radius authentification (and it's the radius that sent the vrf)

thanks for your help Stephane