Hi all. Can anyone tell me if the 8 port IMA network module is supported in the 3640s? I used the Compatibility tool, and it said I'd be good with 12.2.11 YT but I'm having no success. Any advice is appreciated. *Mar 1 00:00:05.211: %PA-2-UNDEFPA: Undefined Port Adaptor type BD in bay 2 Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3640-I-M), Version 12.2(11)YT2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2003 by cisco Systems, Inc. Compiled Thu 27-Feb-03 16:41 by cmong Ejay Hire ... ln -s /dev/null /dev/clue
Even tho this isn't Cisco TAC, provided you have a valid CCO account, go to: http://www.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi charles On Thu, Aug 28, 2003 at 07:32:19PM -0500, Ejay Hire wrote:
Hi all. Can anyone tell me if the 8 port IMA network module is supported in the 3640s? I used the Compatibility tool, and it said I'd be good with 12.2.11 YT but I'm having no success.
Any advice is appreciated.
*Mar 1 00:00:05.211: %PA-2-UNDEFPA: Undefined Port Adaptor type BD in bay 2 Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3640-I-M), Version 12.2(11)YT2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2003 by cisco Systems, Inc. Compiled Thu 27-Feb-03 16:41 by cmong
Ejay Hire ... ln -s /dev/null /dev/clue
Ejay Hire wrote:
Hi all. Can anyone tell me if the 8 port IMA network module is supported in the 3640s? I used the Compatibility tool, and it said I'd be good with 12.2.11 YT but I'm having no success.
Any advice is appreciated.
*Mar 1 00:00:05.211: %PA-2-UNDEFPA: Undefined Port Adaptor type BD in bay 2 Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3640-I-M), Version 12.2(11)YT2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2003 by cisco Systems, Inc. Compiled Thu 27-Feb-03 16:41 by cmong
Ejay Hire ... ln -s /dev/null /dev/clue
Could be that the boot image is complaining and not the run image. Can't tell from your email snippet. Check what version of boot image is the min req't for the module. ========= bep
I've just upgraded a Cisco 7206 for a customer with a DS3 and we're now ready to take full routes. No one is answering at support, email has gone unanswered for thirty minutes - if someone at the Sprint NOC is awake please call Neal or Mike at 402-426-6136 - we'd really like to get this done before customers start waking up ... -- mailto:neal@lists.rauhauser.net phone:402-301-9555 "After all that I've been through, you're the only one who matters, you never left me in the dark here on my own" - Widespread Panic
participants (4)
-
Bruce Pinsky -
Charles H. Gucker -
Ejay Hire -
neal rauhauser