With the deluge of 10Gb X device recommendations, I thought I'd hit the list with one more. Does anyone out there running 10Gb managed CPE feel like sharing their experiences? Our use case would be a managed endpoint that would allow for testing and circuit verification while providing a layer 2 extension to our edge gear at the PoPs. We're hoping to find a cheap vendor-supplied solution- not homebrew. If so, which features have been important to you? Which vendors have good products? What price point? Thanks, Dan
We use Brocade ICX 6450s for this. -Chris On Tue, May 26, 2015 at 2:40 PM, Daniel Rohan <drohan@gmail.com> wrote:
With the deluge of 10Gb X device recommendations, I thought I'd hit the list with one more. Does anyone out there running 10Gb managed CPE feel like sharing their experiences?
Our use case would be a managed endpoint that would allow for testing and circuit verification while providing a layer 2 extension to our edge gear at the PoPs.
We're hoping to find a cheap vendor-supplied solution- not homebrew.
If so, which features have been important to you?
Which vendors have good products?
What price point?
Thanks,
Dan
-- - Chris
Any feedback on the new 7250’s yet? On 5/26/15, 3:02 PM, "NANOG on behalf of Chris Lane" <nanog-bounces@nanog.org on behalf of clane1875@gmail.com> wrote:
We use Brocade ICX 6450s for this.
-Chris
On Tue, May 26, 2015 at 2:40 PM, Daniel Rohan <drohan@gmail.com> wrote:
With the deluge of 10Gb X device recommendations, I thought I'd hit the list with one more. Does anyone out there running 10Gb managed CPE feel like sharing their experiences?
Our use case would be a managed endpoint that would allow for testing and circuit verification while providing a layer 2 extension to our edge gear at the PoPs.
We're hoping to find a cheap vendor-supplied solution- not homebrew.
If so, which features have been important to you?
Which vendors have good products?
What price point?
Thanks,
Dan
-- - Chris
Who makes the 7250? On Tue, May 26, 2015 at 10:07 PM, Brant Ian Stevens < branto@argentiumsolutions.com> wrote:
Any feedback on the new 7250’s yet?
On 5/26/15, 3:02 PM, "NANOG on behalf of Chris Lane" < nanog-bounces@nanog.org on behalf of clane1875@gmail.com> wrote:
We use Brocade ICX 6450s for this.
-Chris
On Tue, May 26, 2015 at 2:40 PM, Daniel Rohan <drohan@gmail.com> wrote:
With the deluge of 10Gb X device recommendations, I thought I'd hit the list with one more. Does anyone out there running 10Gb managed CPE feel like sharing their experiences?
Our use case would be a managed endpoint that would allow for testing and circuit verification while providing a layer 2 extension to our edge gear at the PoPs.
We're hoping to find a cheap vendor-supplied solution- not homebrew.
If so, which features have been important to you?
Which vendors have good products?
What price point?
Thanks,
Dan
-- - Chris
Brocade. From: Colton Conor Date: Wednesday, May 27, 2015 at 12:52 PM To: branto Cc: Chris Lane, Daniel Rohan, NANOG Subject: Re: 10Gb CPE Who makes the 7250? On Tue, May 26, 2015 at 10:07 PM, Brant Ian Stevens <branto@argentiumsolutions.com> wrote: Any feedback on the new 7250’s yet? On 5/26/15, 3:02 PM, "NANOG on behalf of Chris Lane" <nanog-bounces@nanog.org on behalf of clane1875@gmail.com> wrote:
We use Brocade ICX 6450s for this.
-Chris
On Tue, May 26, 2015 at 2:40 PM, Daniel Rohan <drohan@gmail.com> wrote:
With the deluge of 10Gb X device recommendations, I thought I'd hit the list with one more. Does anyone out there running 10Gb managed CPE feel like sharing their experiences?
Our use case would be a managed endpoint that would allow for testing and circuit verification while providing a layer 2 extension to our edge gear at the PoPs.
We're hoping to find a cheap vendor-supplied solution- not homebrew.
If so, which features have been important to you?
Which vendors have good products?
What price point?
Thanks,
Dan
-- - Chris
I also used brocade icx series for this. Depending on feature requirements the juniper ex3300 might be cheaper. On Tue, May 26, 2015, 12:04 PM Chris Lane <clane1875@gmail.com> wrote:
We use Brocade ICX 6450s for this.
-Chris
On Tue, May 26, 2015 at 2:40 PM, Daniel Rohan <drohan@gmail.com> wrote:
With the deluge of 10Gb X device recommendations, I thought I'd hit the list with one more. Does anyone out there running 10Gb managed CPE feel like sharing their experiences?
Our use case would be a managed endpoint that would allow for testing and circuit verification while providing a layer 2 extension to our edge gear at the PoPs.
We're hoping to find a cheap vendor-supplied solution- not homebrew.
If so, which features have been important to you?
Which vendors have good products?
What price point?
Thanks,
Dan
-- - Chris
Aren't these Brocade and Juniper solutions just switches? I thought the original poster was asking for a 10G CPE device? On Wed, May 27, 2015 at 2:12 PM, Cody Grosskopf <codygrosskopf@gmail.com> wrote:
I also used brocade icx series for this. Depending on feature requirements the juniper ex3300 might be cheaper.
On Tue, May 26, 2015, 12:04 PM Chris Lane <clane1875@gmail.com> wrote:
We use Brocade ICX 6450s for this.
-Chris
On Tue, May 26, 2015 at 2:40 PM, Daniel Rohan <drohan@gmail.com> wrote:
With the deluge of 10Gb X device recommendations, I thought I'd hit the list with one more. Does anyone out there running 10Gb managed CPE feel like sharing their experiences?
Our use case would be a managed endpoint that would allow for testing and circuit verification while providing a layer 2 extension to our edge gear at the PoPs.
We're hoping to find a cheap vendor-supplied solution- not homebrew.
If so, which features have been important to you?
Which vendors have good products?
What price point?
Thanks,
Dan
-- - Chris
We have around 1000 or so ex3300¹s deployed as cpe gear for sites with circuits anywhere from 5m to 10g. It both will do everything you need and allow the flexibility for lots of options if necessary. Not saying it¹s the best option for everyone but should fit all requirements. ‹ Nick On 5/28/15, 9:22 AM, "Colton Conor" <colton.conor@gmail.com> wrote:
Aren't these Brocade and Juniper solutions just switches? I thought the original poster was asking for a 10G CPE device?
On Wed, May 27, 2015 at 2:12 PM, Cody Grosskopf <codygrosskopf@gmail.com> wrote:
I also used brocade icx series for this. Depending on feature requirements the juniper ex3300 might be cheaper.
On Tue, May 26, 2015, 12:04 PM Chris Lane <clane1875@gmail.com> wrote:
We use Brocade ICX 6450s for this.
-Chris
On Tue, May 26, 2015 at 2:40 PM, Daniel Rohan <drohan@gmail.com> wrote:
With the deluge of 10Gb X device recommendations, I thought I'd hit the list with one more. Does anyone out there running 10Gb managed CPE feel like sharing their experiences?
Our use case would be a managed endpoint that would allow for testing and circuit verification while providing a layer 2 extension to our edge gear at the PoPs.
We're hoping to find a cheap vendor-supplied solution- not homebrew.
If so, which features have been important to you?
Which vendors have good products?
What price point?
Thanks,
Dan
-- - Chris
I would say these are what you are after, last time I tested these I seem to remember Accedian coming out on top, but they are all good. http://www.rad.com/10/Carrier-Ethernet-Demarcation/27932/ http://accedian.com/ http://www.mrv.com/products/carrier-ethernet -----Original Message----- From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of Daniel Rohan Sent: Wednesday, 27 May 2015 6:41 a.m. To: NANOG Subject: 10Gb CPE With the deluge of 10Gb X device recommendations, I thought I'd hit the list with one more. Does anyone out there running 10Gb managed CPE feel like sharing their experiences? Our use case would be a managed endpoint that would allow for testing and circuit verification while providing a layer 2 extension to our edge gear at the PoPs. We're hoping to find a cheap vendor-supplied solution- not homebrew. If so, which features have been important to you? Which vendors have good products? What price point? Thanks, Dan
participants (7)
-
Brant Ian Stevens -
Chris Lane -
Cody Grosskopf -
Colton Conor -
Daniel Rohan -
Tony Wicks -
Wolff, Nicholas (Nick)