It would be fairly useful if Cisco had a published document that detailed the minimum configuration for each major router line to support BGP with 1 to 4 full views. Of course, this would have to be periodically updated. By this, I mean a separate overlay document for their entire router product line. This would be very helpful to operators and integrators who get asked about minimum configurations fairly frequently... (I'm only picking on Cisco because they are 1) big and 2) have routers that support BGP but don't have enough memory for full tables) - Dan On 1/11/05 12:21 PM, "Rodney Dunn" <rodunn@cisco.com> wrote:

This will not work for full routes. The memory upgrade is utilized for larger IOS images with new features.

An update to the product bulletin is in the works to clarify it.

Further specific questions in regards to the memory can be moved over to the cisco-nsp alias.

Rodney

On Tue, Jan 11, 2005 at 07:39:49AM +0200, Mark Bojara wrote:

...

Hello people of nanog :)

Ive been doing some reading up and I see that that 2600 series is now supporting 256MB of memory. Do you guys think this router could handle 3/4 peers a QoS setup (RSVP or something)?

http://www.cisco.com/en/US/products/hw/routers/ps259/products_qanda_item0900... ecd800f71dd.shtml

Regards Mark