It should be "set chassis route-memory-enhanced" for Junos Version 10.4 - "memory-enhanced" was introduced from version 11.2 Start working on your hardware upgrade plan, this is just a work-around to keep you going but consider getting some capable, REs, SCBs, MPCs and perhaps HC PSUs etc Regards Paschal Masha | Engineering Skype ID: paschal.masha ----- Original Message ----- From: "Nehul Patel" <nehul.patel@gmail.com> To: "Mark Tinka via NANOG" <admin@community.nanog.org>, "nanog" <nanog@nanog.org> Sent: Friday, May 6, 2022 10:21:59 AM Subject: Re: [NANOG] [Mailman List] Strange behavior on the Juniper MX240 Yes Mark it is odd On Thu, May 5, 2022 at 10:09 PM Mark Tinka via NANOG < [ mailto:admin@community.nanog.org | admin@community.nanog.org ] > wrote: [ https://community.nanog.org/u/mark_tinka4 | Mark_Tinka4 ] May 6 Odd, as this said it came alive in Junos 10.4: [ https://www.juniper.net/documentation/us/en/software/junos/junos-overview/to... | juniper.net ] [ https://www.juniper.net/documentation/us/en/software/junos/junos-overview/to... | memory-enhanced | Junos OS | Juniper Networks ] Allocate more jtree memory for routing tables and Layer 3 VPNs. Mark. [ https://community.nanog.org/t/strange-behavior-on-the-juniper-mx240/55213/27 | Visit Topic ] to respond. To unsubscribe from these emails, [ https://community.nanog.org/email/unsubscribe/75ed36d4ce5f33f98f7b0c938cdc33... | click here ] .