RE: ISPs slowing P2P traffic...
I'm not aware of any modern cable modems that operate at 10 Mbps. Not that they couldn't set it at that speed, but AFAIK, they're all 10/100 ports. Frank -----Original Message----- From: Blake Pfankuch [mailto:epic59@shenrons-house.com] Sent: Wednesday, January 09, 2008 9:47 PM To: frnkblk@iname.com; joe@oregon.uoregon.edu; jared@puck.nether.net; nanog@merit.edu Subject: RE: ISPs slowing P2P traffic... What about Comcast selling their new speed burst thing that allows up to 12 mbit, but also providing modems with a 10mbit Ethernet port. They have been doing that around here for quite a while... -----Original Message----- From: owner-nanog@merit.edu [mailto:owner-nanog@merit.edu] On Behalf Of Frank Bulk - iNAME Sent: Wednesday, January 09, 2008 8:12 PM To: joe@oregon.uoregon.edu; jared@puck.nether.net; nanog@merit.edu Subject: RE: ISPs slowing P2P traffic... Without being totally conspiratorial, do you think the network engineers at these service providers know that that their residential subscribers' PCs and links aren't tuned for high speeds, and so can feel fairly confident in selling these speeds knowing they won't be used? Frank -----Original Message----- From: owner-nanog@merit.edu [mailto:owner-nanog@merit.edu] On Behalf Of Joe St Sauver Sent: Wednesday, January 09, 2008 4:15 PM To: jared@puck.nether.net Cc: nanog@merit.edu Subject: Re: ISPs slowing P2P traffic... Jared mentioned: # We'll see what happens, and how the 160Mb/s DOCSIS 3.0 connections #and infrastructure to support it pan out on the comcast side.. There may be comparatively little difference from what you see today, largely because most hosts still have stacks which are poorly tuned by default, or host throughput is limited by some other device in the path (such as a broadband "router") which acts by default as the constricting link in the chain, or the application itself isn't written to take full advantage of higher speed wide area connections. Depending on your point of view, all those poorly tuned hosts are either a incredible PITA, or the only thing that's keeping the boat above water. If you believe the latter point of view, tuning guides such as http://www.psc.edu/networking/projects/tcptune/ and diagnostic tools like NDT (e.g., see http://miranda.ctd.anl.gov:7123/ ) are incredibly seditious resources. :-) Regards, Joe St Sauver (joe@oregon.uoregon.edu) Disclaimer: all opinions strictly my own.
On Wed, 9 Jan 2008 21:54:55 -0600 "Frank Bulk - iNAME" <frnkblk@iname.com> wrote:
I'm not aware of any modern cable modems that operate at 10 Mbps. Not that they couldn't set it at that speed, but AFAIK, they're all 10/100 ports.
Yup. I've measured >11M bps on file transfers from my office to my house, over Comcast. --Steve Bellovin, http://www.cs.columbia.edu/~smb
participants (2)
-
Frank Bulk - iNAME
-
Steven M. Bellovin