I worked with Breezecom radios for a year. I never had an ethernet compatibility issue. All devices and adapters should work fine. It's important that you know what type of radio you will be hooking up to. an SA or a WB. SA's are single host devices, you would run a straight 10BaseT cable between the SA and your ethernet Card/Adapter. The WB's are bridges, you would use a hub or if your on a one-to-one relationship use a cross-over cable. If your using the SA's and you change your ip or the ethernet adapter plugged into the SA you should power cycle the SA as it will continue to try to serve only the IP/Mac Address it first saw on power up. James At 11:40 AM 10/23/98 -0700, Kevin Oberman wrote:

The NANOG 14 web pages says that 802.11 wireless LANs will be available in the hotel.

A review of 802.11 PCMCIA cards in Communications News found that only the BreezeCom and Raylink products would inter-operate.

There is no indication of the manufacturer(s) of the units so that we can bring compatible cards. It does say that additional information will be posted the week before the show, but I'll already be on the road setting up the networking for SC98 in Orlando, so it will be too late to make sure I have an appropriate card.

R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634

James McKenzie mcs@1ipnet.net http://www.1ipnet.net